5 Best Replacement Pool Pump Strainer Housings (November 2026)
The best replacement pool pump strainer housings include the Hayward LX Pump Strainer Housing for a complete Hayward LX assembly, the Hayward SPX1500CAP Strainer Housing with Basket Replacement for wide Hayward model coverage, and the Waterway Plastics 310-6500 Hi-Flo Pump Strainer Housing for Waterway above-ground pumps.
On this page (9 sections)
- How we compared these strainer housings
- The best replacement pool pump strainer housings
- How to match a housing to your pump model
- Which port sizes do you need: 1-1/2-inch or 1-1/2-inch by 2-inch?
- Should you buy a housing with a lid and O-ring included?
- How do you install a replacement strainer housing?
- How do you care for a pump basket and housing?
- When should you replace the housing instead of just the basket?
- The verdict: which housing should you buy?
The best pool pump basket housing for most Hayward owners is the Hayward LX Pump Strainer Housing, Lid & Basket SP1516, because it gives you the housing, basket and lid with O-ring as one assembly. If your pump model falls under the SPX1500CAP lists, that housing is the safer match.
A cracked strainer housing can let in air, drop pressure and stop the pump from priming. The fix is simple, but the fit has to be exact.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared the picks by pump fit, port size, included parts and lid type.
Start with your pump brand and model number. Then check the port pairing.
Then decide whether you need a lid and O-ring included.
If you are still planning the whole pump setup, our guide to pool pumps and filters explains how the pump, strainer and filter work together.
Our picks at a glance
-
1
Best for a complete Hayward LX assemblyHayward LX Pump Strainer Housing
9.7/10 our score
See it on Amazon -
2
Best for wide Hayward model coverageHayward SPX1500CAP Strainer Housing with Basket Replacement
9.6/10 our score
See it on Amazon -
3
Best for Waterway above-ground pumpsWaterway Plastics 310-6500 Hi-Flo Pump Strainer Housing
9.3/10 our score
See it on Amazon
- 4
Check itPoolzilla Pump Strainer Housing & Basket Compatible
Best compatible Pick for Hayward Power-Flo LX owners - 5
Check itXQK SPX1500CAP Pump Strainer Housing w/Basket Compatible
Best budget-style SPX1500CAP alternative
How we compared these strainer housings
We checked fit first, then ports, then what is in the box. A housing that matches your pump series and port size will work.
A near match will leak at the lid or at a port joint.
We looked at Hayward Power-Flo LX, Power-Flo II and SP1500 series fits. We also included Waterway for above-ground pumps, because the trap size and lid design differ.
We checked whether each pick includes a basket. We also checked whether a lid and O-ring are included, since those parts control the seal.
We did not test these parts on a live pump. We compared the stated fits, materials, port sizes and included parts, and we matched each pick to the owners most likely to need it.
The best replacement pool pump strainer housings
The Hayward SP1516 is the cleanest first choice for a Hayward LX or Power-Flo II repair. The SPX1500CAP housing covers the widest list of Hayward models.
The Waterway trap is the right path for Waterway above-ground pumps.
Hayward LX Pump Strainer Housing: Best for a complete Hayward LX assembly
- Housing, lid and basket assembly
- ABS material
- 1-1/2-inch FIP inlet by 1-1/2-inch MIP outlet
- Fits Hayward Power-Flo LX and Power-Flo II pumps
A complete SP1516 assembly with housing, basket and lid with O-ring for Power-Flo LX and Power-Flo II pumps.
Pros
- Includes housing, basket and lid with O-ring
- Matches 1-1/2-inch ports
- Made of ABS
Cons
- Fit is limited to the named Hayward pump families
- Check lid compatibility before ordering
The Hayward LX Pump Strainer Housing SP1516 suits owners who want one assembly that covers the main repair parts. It includes the housing, basket and lid with O-ring.
It fits Hayward Power-Flo LX above-ground and Power-Flo II self-priming pool pumps. That fit list matters more than the shape, because housings in this family can look alike.
The 1-1/2-inch FIP inlet by 1-1/2-inch MIP outlet pairing is the key check in daily use. Match those ports to your pipe and fittings before you order.
The ABS construction is made for pool equipment duty. ABS is a common choice for strainer housings because it resists water and handles outdoor use.
You get a complete repair in one box. That helps when the old housing is cracked and the lid seal is also worn.
The trade-off is fit range. This pick is for the named Hayward families, not for Waterway or other brands.
Choose it when your pump is a Power-Flo LX or Power-Flo II and you want the lid and seal included. Skip it if your model number points to the SPX1500CAP lists instead.
Hayward SPX1500CAP Strainer Housing with Basket Replacement: Best for wide Hayward model coverage
- Strainer housing with basket
- Fits SP1580, SP1700 and SP1500 series models
- Also fits select Easy-Clear, Perflex, Pro and VL filter models
- Plastic construction
A broad-fit Hayward housing that covers many Power-Flo pump and select filter models, with a basket included.
Pros
- Covers many Hayward pump models
- Includes basket
- Also fits select filter models
Cons
- Model lists are long, so confirm your exact model
- Not a Waterway fit
The Hayward SPX1500CAP Strainer Housing with Basket Replacement suits owners with one of the many named Hayward models. It is the broad-coverage pick in this group.
It fits Power-Flo LX SP1580 series models SP1575LX, SP1580, SP1580X15, SP1520UN, EP1500LX and SP1680. It also fits Power-Flo II SP1700 series models.
It also fits Power-Flo SP1500 series models SP1500, SP1510, SP1511, SP1550, SP1575, EP1500 and SP1516. Select Easy-Clear, Perflex, Pro and VL filter models are also named.
The basket is included, so you can replace the housing and the basket in one repair. That matters when the old basket is cracked or its slots are clogged.
Daily use is simple. Drop in the basket, seat the lid, and check that the seal closes evenly before you prime the pump.
The trade-off is the length of the model list. Long lists raise the chance of a near miss, so read your full model number and match it line by line.
Choose it when your exact model appears on the SPX1500CAP lists. If you only need a basket, our guide to the best pool pump basket replacement may be enough.
Waterway Plastics 310-6500 Hi-Flo Pump Strainer Housing: Best for Waterway above-ground pumps
- Waterway 6-inch trap assembly
- Self-locking lid
- 1-1/2-inch by 2-inch ports
- Clear top lid
A Waterway 6-inch trap assembly with a clear self-locking lid for above-ground pumps.
Pros
- Clear lid for a quick basket check
- Self-locking lid design
- Made for Waterway above-ground use
Cons
- Not listed for Hayward pump fits
- Port pairing differs from the Hayward picks
The Waterway Plastics 310-6500 Hi-Flo Pump Strainer Housing suits Waterway above-ground pump owners. It is the only Waterway pick here, and that brand fit is its main value.
It is a Waterway 6-inch trap assembly with a self-locking lid. The clear top lets you check the water level and basket without breaking the seal.
The ports are 1-1/2-inch by 2-inch. That pairing differs from the 1-1/2-inch by 1-1/2-inch Hayward picks, so check your pipe sizes before you order.
In daily use, the clear lid helps you spot a full basket or a low water level fast. A self-locking lid also helps you seat the cover the same way each time.
The basket is part of the assembly. Fits and parts stay within the Waterway system, which keeps the match simple for Waterway owners.
The trade-off is brand range. This housing is not listed for the Hayward pump models in the other picks.
Choose it for a Waterway above-ground pump with matching ports. Skip it for Hayward Power-Flo pumps, even if the shape looks close.
Poolzilla Pump Strainer Housing & Basket Compatible: Best compatible Pick for Hayward Power-Flo LX owners
- ABS plastic body
- Includes body, basket, cover and O-ring
- 1-1/2-inch FIP inlet by 1-1/2-inch MIP outlet
- Compatible with named Hayward Power-Flo models
A compatible ABS housing set with body, basket, cover and O-ring for the named Hayward Power-Flo models.
Pros
- Full set of body, basket, cover and O-ring
- ABS plastic
- Matches common 1-1/2-inch port pairing
Cons
- Compatible brand, not Hayward
- Long model list needs careful checking
The Poolzilla Pump Strainer Housing & Basket Compatible suits Hayward Power-Flo LX owners who want a compatible-brand set. It is built around the same pump families as the Hayward picks.
It is compatible with Hayward Power-Flo LX, Power-Flo II, Power-Flo SP1500 series pumps and strainers, plus the Pro and VL series filters named in the fit list.
The set includes body, strainer basket, cover and O-ring. That full set helps when the old housing, cover and seal all need work.
The body is ABS plastic. Poolzilla says the basket gathers debris, leaves and other unwanted material before it reaches the pump.
The ports are 1-1/2-inch FIP inlet by 1-1/2-inch MIP outlet. Match that pairing to your fittings, and check the cover seat before you run the pump.
Daily care is the same as with any strainer housing. Empty the basket before it gets half full, rinse the slots, and seat the cover evenly.
The trade-off is brand. Poolzilla is a compatible brand, not Hayward, so match the model list with care.
Choose the best pentair pool pump basket guide instead if your pump is Pentair. For Hayward Power-Flo models, this Poolzilla set is a strong compatible option.
XQK SPX1500CAP Pump Strainer Housing w/Basket Compatible: Best budget-style SPX1500CAP alternative
- SPX1500CAP housing with basket
- Compatible with named Hayward Power-Flo models
- Made to replace a damaged strainer housing
- Includes basket
A compatible SPX1500CAP housing with basket for the named Hayward Power-Flo pump models.
Pros
- SPX1500CAP shape for named Hayward models
- Includes basket
- Purpose-built as a replacement housing
Cons
- XQK brand, not Hayward
- Similar-looking housings can be confused, so confirm model and size
The XQK SPX1500CAP Pump Strainer Housing w/Basket Compatible suits owners who need the SPX1500CAP shape at a compatible-brand price point. It targets the same Hayward families as the SPX1500CAP Hayward pick.
It is compatible with Power-Flo LX models SP1580, SP1575LX, SP1580X15, SP1520UN, EP1500LX and SP1680. It also covers Power-Flo II SP1700 series models.
It also covers Power-Flo SP1500 models SP1500, SP1510, SP1511, SP1550, SP1575, EP1500 and SP1516. Filter models C5501575XES, EC301540ESNVTL and S144T1540S are also named.
The basket is included with the housing. That makes this a repair part for a damaged housing, not just a replacement basket.
XQK warns that similar housings can be hard to tell apart by looks alone. Confirm your pump style, model and size before you buy.
In daily use, the job is the same as with the Hayward version. Seat the basket, close the lid evenly, and check both port joints for air leaks.
The trade-off is brand and fit risk. XQK is not Hayward, and lookalike housings raise the chance of a wrong order.
Choose it when your exact model is on the SPX1500CAP list and you accept a compatible brand. If the seal is your only problem, check our guide to the best pool pump basket o ring first.
How to match a housing to your pump model
Your pump brand and series decide the housing. Hayward Power-Flo, Waterway Hi-Flo and Pentair pumps do not share the same trap fit.
Find the model plate on the pump body. Write down the full model number, not just the series name.
Then match that number to the fit list for each housing. A series name alone is not enough, because one series can cover several housing shapes.
For Hayward owners, the SP1516 and SPX1500CAP lists overlap on some models. Overlap does not mean the housings are identical.
Check the lid fit as well. Some repairs let you reuse a good lid.
Other repairs need a new lid and O-ring as a set.
If your basket is cracked but the housing is sound, you may only need a basket. Our best pool pump skimmer basket guide covers a different part, so use that only for the skimmer at the pool wall.
Which port sizes do you need: 1-1/2-inch or 1-1/2-inch by 2-inch?
Match both ports before you order. The inlet and the outlet can be different sizes, and adapters add joints that can leak.
The Hayward SP1516 and the Poolzilla set use 1-1/2-inch FIP inlet by 1-1/2-inch MIP outlet. The Waterway 310-6500 uses 1-1/2-inch by 2-inch.
FIP and MIP describe the thread side. FIP threads are inside the fitting.
MIP threads are outside the fitting.
In plain terms, check whether your pipe threads into the housing or onto the housing. That detail decides if the joint seals.
Measure the pipe with a ruler before you order. Do not guess from the old housing shape.
If the port size is wrong, the pump may still seem to fit at first. Air can enter at the joint and the pump can lose prime under load.
Should you buy a housing with a lid and O-ring included?
Yes, if your old lid or seal is worn. The lid and O-ring control the air seal that lets the pump stay primed.
The Hayward SP1516 includes the lid with O-ring. The Poolzilla set includes a cover and O-ring.
The Waterway pick has a clear self-locking lid.
A flat, cracked or warped lid will not seal evenly. A flattened O-ring can also let in air even when the lid looks fine.
Check the lid seat on the new housing before you install it. The lid should sit flat all the way around.
Lubricate the O-ring only as the pump maker directs. Too much product can collect debris and affect the seal.
If your current lid is clean, flat and made for the same housing, reuse may work. When the lid is old or stained, a new lid and seal give you a cleaner start.
How do you install a replacement strainer housing?
Turn off the pump and power before you start. A strainer housing repair should never be done with the pump running.
Remove the old lid and lift out the basket. Empty the basket and rinse it so debris does not fall into the pump.
Turn off the water flow at the valves if your setup has them. If it does not, be ready for water to drain from the lines.
Remove the old housing at the inlet and outlet joints. Keep the pipe ends clean and free of old thread sealant.
Fit the new housing, then connect both ports. Hand-tighten first, then use the tool the fitting maker calls for.
Drop in the basket, seat the lid and O-ring, and close the lid evenly. Prime the pump as the pump maker directs, then check for leaks and air bubbles.
Run the pump and watch the lid area and both ports for the first few minutes. A small drip at a port joint is easier to fix before debris builds up.
How do you care for a pump basket and housing?
Empty the basket before it is half full. Debris past that point restricts flow and strains the pump.
Check the basket after heavy use, storms or leaf drops. Rinse the slots with a hose until water passes through freely.
Inspect the basket for cracks each time you empty it. A cracked basket can let debris through to the impeller.
Wipe the lid seat and the O-ring with a clean cloth. Remove grit, scale and leaf bits that can break the seal.
Check the lid for warping and sun damage. Replace a lid that flexes, cracks or no longer sits flat.
Keep the housing area clean and dry so small leaks are easy to spot. A drip at a port joint can grow into a bigger air leak.
If the pump hums but does not move water, stop it and check the basket, lid seal and prime. Running a pump without water can cause damage.
When should you replace the housing instead of just the basket?
Replace the housing when the body is cracked, warped or leaking at the ports. A basket swap cannot fix a failed housing seal.
Replace the basket alone when the housing is sound but the basket is cracked or clogged. That is the cheaper repair.
Replace the lid and O-ring when the seal is the problem. A new seal can fix a drip or prime loss if the housing and lid are flat.
Replace the full assembly when age has worn several parts at once. The SP1516 and Poolzilla sets make sense in that case.
Check the ports for thread damage and cross-threading. Damaged threads can leak even with a new Teflon wrap or sealant.
If the housing is old and sun-brittle, a full replacement is the safer call. New ABS parts give you a clean seat and known fit.
The verdict: which housing should you buy?
Buy the Hayward SP1516 if you have a Power-Flo LX or Power-Flo II and want a complete assembly. It includes the housing, basket and lid with O-ring.
Buy the Hayward SPX1500CAP if your exact model is on its wide fit list. That coverage makes it the safest Hayward choice for many owners.
Buy the Waterway 310-6500 for a Waterway above-ground pump with 1-1/2-inch by 2-inch ports. Its clear self-locking lid is a real plus for daily checks.
Buy the Poolzilla set if you want a compatible-brand assembly with body, basket, cover and O-ring. Buy the XQK SPX1500CAP housing if your model matches its list and you want a compatible-brand SPX1500CAP shape.
Match the model number first, then the ports, then the lid and seal parts. That order will help you avoid the most common wrong order.
Our top 3 picks at a glance
-
1
Best for a complete Hayward LX assemblyHayward LX Pump Strainer Housing
9.7/10 our score
See it on Amazon -
2
Best for wide Hayward model coverageHayward SPX1500CAP Strainer Housing with Basket Replacement
9.6/10 our score
See it on Amazon -
3
Best for Waterway above-ground pumpsWaterway Plastics 310-6500 Hi-Flo Pump Strainer Housing
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I know which pump strainer housing will fit my pump?
Match your pump brand and series first, then check the model list and port sizes. Hayward Power-Flo LX, Power-Flo II and SP1500 models use different housing lists, and Waterway traps use their own assembly.
Confirm the inlet and outlet size before you order, and check whether your existing lid fits the new housing.
What is the difference between a strainer housing and a skimmer basket?
A strainer housing sits at the pump and holds the pump basket that catches large debris before it reaches the impeller. A skimmer basket sits in the skimmer at the pool wall and catches debris earlier in the circulation path.
They are not interchangeable, so buy for the location that is cracked or leaking.
Can I reuse my old lid and O-ring on a new housing?
Only when the new housing is made for the same pump series and the lid seats flat with no cracks. A warped lid or a flattened O-ring can let air in and make the pump lose prime.
When in doubt, use the lid and sealing parts included with the assembly.
Why does my pump lose prime after I replace the housing?
Air leaks are the usual cause, often from a lid that is not seated evenly, a damaged O-ring or a port joint that is not sealed. Check the lid, O-ring and both port connections before you run the pump.
A clear lid can help you see the water level and basket without opening the housing.
How often should I empty the pump basket?
Empty it whenever debris collects, and check it before the basket is more than about half full. A full basket restricts flow and puts extra strain on the pump.
Clean the basket slots so water can pass through freely.
About this guide: Our look at replacement pool pump strainer housings draws on maker specs, materials and what owners report. See how we research.


