Best picks

9 Best Replacement Pool Pump Capacitors (November 2026)

Updated on · By the Pool Care Pilot team

The best pool pump capacitors include the VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC for common 35 MFD replacements, the VEXUNGA 161-193 uF MFD 110-125 VAC 50/60 for high-capacitance motor starts, and the BOJACK 30 uf MFD 370V 450V AC for 30 MFD motor service.

On this page (6 sections)
  1. How we chose the best pool pump capacitors
  2. Best pool pump capacitor picks by motor need
  3. What should you check before ordering a pool pump capacitor?
  4. How do you replace a pool pump capacitor safely?
  5. Which capacitor is best for a Hayward Super Pump?
  6. Best pool pump capacitor: the final choice

The best pool pump capacitor for many 35 MFD motors is the VEXUNGA 35uF 370/440/450VAC capacitor. It is a useful starting point, not a universal answer for every pool pump.

The right choice still depends on the old part's capacitance, voltage, start or run design, body size and terminal layout. Those details come from the label on the failed part and from the motor plate.

A capacitor can look similar to another part while serving a different motor. A 50uF run capacitor, a 161-193uF start capacitor and a 50 + 5uF dual-run capacitor are not interchangeable just because their cases are round.

Think of capacitance as the first filter. The motor was built for a specific value, so a nearby number is still the wrong number.

Voltage is the next filter. A 110-125 VAC start design and a 370 VAC run design belong to different motor circuits.

Size and terminals come after the electrical checks. A correct part that is too tall or has awkward terminals can turn a simple swap into a poor fit.

This guide is built around those checks. Each pick is explained by the motor need it suits, what its specs mean in daily use, and where it falls short.

That approach suits owners who want a focused repair. It also suits owners who are comparing several options before they spend money on the wrong part.

If you are replacing more than the capacitor, start with our guide to pool pumps and filters. For a motor-only repair, compare these picks with the best pool pump motors before ordering.

Keep the old capacitor until the new one is ready. Its markings are the best evidence you have for a clean match.

Our picks at a glance

  1. 1 VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC
    Best for common 35 MFD replacements

    VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC

    9.7/10 our score

    See it on Amazon
  2. 2 VEXUNGA 161-193 uF MFD 110-125 VAC 50/60
    Best for high-capacitance motor starts

    VEXUNGA 161-193 uF MFD 110-125 VAC 50/60

    9.6/10 our score

    See it on Amazon
  3. 3 BOJACK 30 uf MFD 370V 450V AC
    Best for 30 MFD motor service

    BOJACK 30 uf MFD 370V 450V AC

    9.4/10 our score

    See it on Amazon
  1. 4IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair

    IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair

    Best for 50uF Hayward or Pentair repairs
    Check it
  2. 5JARD 50 uF x 370 VAC Round

    JARD 50 uF x 370 VAC Round

    Best for compact 50uF 370 VAC fit
    Check it
  3. 6Century USQ1152 1-1/2 HP

    Century USQ1152 1-1/2 HP

    Best for a complete motor replacement
    Check it
  4. 7[UL Listed] BlueStars 25 uF MFD MFD

    [UL Listed] BlueStars 25 uF MFD MFD

    Best for 25 MFD run capacitors
    Check it
  5. 8[UL Listed] BlueStars 270-324 uF MFD 110-125

    [UL Listed] BlueStars 270-324 uF MFD 110-125

    Best for large 110-125 VAC starts
    Check it
  6. 9Genteq 97F9970

    Genteq 97F9970

    Best for 50 plus 5uF dual-run service
    Check it

How we chose the best pool pump capacitors

We compared capacitance, voltage, capacitor type, stated dimensions, frequency, terminal details and the motor uses named for each product. We also considered how clearly each option fits a common repair decision, such as a 35uF run replacement, a 50uF Hayward or Pentair part, or a high-capacitance 110-125 VAC start capacitor.

Our score weighs specs, features and buyer feedback against what you're shopping for. It does not replace the motor label or the original capacitor's requirements.

A capacitor's uF or MFD value is the first match. The voltage rating is the second.

After those two checks, compare whether the old part is a run capacitor, start capacitor or dual-run part.

The body still matters. Measure the diameter and height of the old part and check the available space inside the motor housing.

A replacement with the right electrical values may still be awkward if the case or terminals do not fit.

ProductBest forCapacitanceVoltageSizeOur score
VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VACcommon 35 MFD replacements35uF ±6%370/440/450 VAC1.97 in diameter x 3.35 in height9.7
VEXUNGA 161-193 uF MFD 110-125 VAC 50/60high-capacitance motor starts161-193uF ±20%110-125 VAC1.43 in diameter x 2.75 in height9.6
BOJACK 30 uf MFD 370V 450V AC30 MFD motor service30uF ±5%370/450 VAC1.97 x 3.35 in stated body size9.4
IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair50uF Hayward or Pentair repairs50uF ±5%250/300/370/440/450 VAC1.97 in diameter x 3.94 in height9.1
JARD 50 uF x 370 VAC Roundcompact 50uF 370 VAC fit50uF370 VAC1.87 in diameter x 3.68 in height8.9
Century USQ1152 1-1/2 HPa complete motor replacement8.6
[UL Listed] BlueStars 25 uF MFD MFD25 MFD run capacitors25uF ±5%370/440 VAC1.77 x 3.54 in8.4
[UL Listed] BlueStars 270-324 uF MFD 110-125large 110-125 VAC starts270-324uF ±20%110-125 VAC1.43 x 2.76 in8.2
Genteq 97F997050 plus 5uF dual-run service50 + 5uF370 VAC7.9

Best pool pump capacitor picks by motor need

The VEXUNGA 35uF model leads this roundup because it combines a useful capacitance, several voltage ratings, 50/60 Hz operation and a clearly stated pool pump use. The remaining picks cover different ratings, so read each section as a matching guide rather than a ranking of universal replacements.

1

VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC: Best for common 35 MFD replacements

VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC, pool pump capacitors
9.7/10Our score
  • 35uF capacitance
  • 370/440/450 VAC
  • 50/60 Hz
  • 1.97 x 3.35 in round body

This round CBB65 capacitor covers a common 35 MFD replacement range and supports 50/60 Hz single-phase motor starting and running. Its two top terminals and stated 370/440/450 VAC range make it a practical first check for matching pool pump motors.

See it on Amazon

Pros

  • 35uF rating
  • Wide 370/440/450 VAC range
  • 50/60 Hz operation

Cons

  • Only suits motors that call for 35uF
  • Round body still needs a space check

The VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC is the strongest match for a motor marked 35uF or 35 MFD. Its ±6% capacitance tolerance and 370/440/450 VAC range cover several common replacement markings.

That range helps when the old label shows one of those voltage values. You still need to confirm that 35uF is the exact value the motor calls for.

The round body measures 1.97 in in diameter and 3.35 in in height. Measure the old capacitor and the compartment before ordering, especially when the original part sits close to the housing or wiring.

This is a CBB65 round run-start capacitor for 50/60 Hz single-phase motors. The stated applications include pool pumps, washing machines, cleaning machines and air compressors.

Its operating temperature range is -40°C to +70°C. That range suits equipment that runs in warm enclosures as well as cooler outdoor setups.

Two terminals sit on the top, so photograph the old wiring before disconnecting it and return each wire to its matching terminal. A clear photo saves time and avoids second guessing during reassembly.

Choose this first when the old label shows 35uF and a compatible voltage. Do not use the capacitance alone as proof of compatibility.

VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VACCheck it on Amazon
2

VEXUNGA 161-193 uF MFD 110-125 VAC 50/60: Best for high-capacitance motor starts

VEXUNGA 161-193 uF MFD 110-125 VAC 50/60, pool pump capacitors
9.6/10Our score
  • 161-193 uF range
  • 110-125 VAC
  • 50/60 Hz
  • 1.43 x 2.75 in round body

The high capacitance range is designed for motors that need a strong starting charge at 110-125 VAC. Use the marked range and voltage as the main matching points, then confirm the body size and terminal layout.

See it on Amazon

Pros

  • High 161-193uF range
  • 110-125 VAC start design
  • Compact round body

Cons

  • Not a substitute for a lower-capacitance run capacitor
  • ±20% tolerance is wider than several other picks

The VEXUNGA 161-193 uF MFD 110-125 VAC 50/60 is for a different repair pattern. Its 161-193uF range is intended for a motor-start application at 110-125 VAC, not for a typical 25uF, 35uF or 50uF run capacitor.

The body measures 1.43 in in diameter and 2.75 in in height. That compact size can help when the motor compartment has limited room, but the original electrical rating must come first.

VEXUNGA gives this CD60 capacitor a ±20% capacitance tolerance and a -40°C to +65°C operating range. It has two top terminals and a 50/60 Hz rating.

The 161-193uF marking describes a capacitance range. Read the old capacitor carefully because a high start-capacitance part is not a general replacement for a lower-value run capacitor.

Choose it when your motor calls for 161-193uF at 110-125 VAC. If the old part shows 270-324uF, compare the BlueStars start capacitor below instead.

VEXUNGA 161-193 uF MFD 110-125 VAC 50/60Check it on Amazon
3

BOJACK 30 uf MFD 370V 450V AC: Best for 30 MFD motor service

BOJACK 30 uf MFD 370V 450V AC, pool pump capacitors
9.4/10Our score
  • 30uF capacitance
  • 370/450 VAC
  • 50/60 Hz
  • 10000 AFC anti-explosion pressure switch

This CBB65 round capacitor is aimed at 30 MFD motor applications and can replace 370 or 450 VAC capacitors when the motor calls for those values. Its 50/60 Hz rating covers common single-phase motor service.

See it on Amazon

Pros

  • 30uF rating
  • 370/450 VAC options
  • 10000 AFC pressure switch

Cons

  • Not suitable for 35 or 50uF motor requirements
  • Check the actual enclosure clearance

The BOJACK 30 uf MFD 370V 450V AC suits a pool pump motor that calls for 30uF or 30 MFD. Its ±5% tolerance, 370/450 VAC rating and 50/60 Hz design give you clear values to compare with the old part.

The round body is described as 1.97 x 3.35 in, while the product dimensions list 1.97 in wide and 3.82 in high. Because those height figures differ, measure the available space before ordering.

BOJACK identifies this as a CBB65 capacitor with a 10000 AFC anti-explosion pressure switch. It uses a polypropylene material and a snap-in mount.

The capacitor can substitute for an oval shape when the MFD and voltage values match. Shape alone is not enough, so confirm the terminals and mounting area as well.

Choose BOJACK when 30uF is the exact motor requirement and you want a 370/450 VAC option. Move to the VEXUNGA 35uF model when the old part is marked 35uF.

BOJACK 30 uf MFD 370V 450V ACCheck it on Amazon
4

IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair: Best for 50uF Hayward or Pentair repairs

IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair, pool pump capacitors
9.1/10Our score
  • 50uF ±5%
  • 250/300/370/440/450 VAC
  • 50/60 Hz
  • 1.97 x 3.94 in body

IWIWE identifies this CBB65/CBB65B run-start capacitor as a replacement for 50uF systems across several voltage ratings. The title names Hayward and Pentair pool pump use, but the old capacitor's exact rating and available space still control the match.

See it on Amazon

Pros

  • 50uF rating
  • Broad voltage range
  • Two top terminals

Cons

  • Taller than some 50uF options
  • Confirm the original motor's exact voltage

The IWIWE 50UF 370VAC Capacitor Fits Hayward Pentair Pool Pump Replacement Part is the most direct choice here for a 50uF pool pump capacitor marked for Hayward or Pentair use. It covers 250/300/370/440/450 VAC systems and uses a ±5% capacitance tolerance.

Its round body measures 1.97 in in diameter and 3.94 in in height. That height is important in a crowded motor housing, so compare it with the old capacitor before you order.

IWIWE describes the part as a CBB65/CBB65B run-start capacitor for 50/60 Hz single-phase motors. The named applications include pool pumps, fan motors, air condensers, washing machines and air compressors.

Two terminals sit on the top. Take a photo of the wire positions before removal, then match the new connections to the old arrangement.

This is a strong Hayward Super Pump capacitor or Pentair replacement candidate only when the old part also calls for 50uF and a compatible voltage. For broader motor replacement planning, read our pool pump vs pool motor guide.

IWIWE 50UF 370VAC Capacitor Fits Hayward PentairCheck it on Amazon
5

JARD 50 uF x 370 VAC Round: Best for compact 50uF 370 VAC fit

JARD 50 uF x 370 VAC Round, pool pump capacitors
8.9/10Our score
  • 50uF capacitance
  • 370 VAC
  • 0.250 x 0.031 in quick-connect terminals
  • 1.87 x 3.68 in body

JARD keeps the match focused on a 50uF, 370 VAC round run capacitor. Its stated quick-connect terminal size and compact body help when the replacement space is tight.

See it on Amazon

Pros

  • 50uF rating
  • Compact stated dimensions
  • Quick-connect terminals

Cons

  • 370 VAC only
  • Terminal and clearance checks remain necessary

The JARD 50 uF x 370 VAC Round keeps the choice simple for a 50uF, 370 VAC run capacitor. Its 0.250 x 0.031 in quick-connect terminals and 1.87 x 3.68 in stated dimensions give you useful physical checks.

Those checks matter in a tight motor housing. Terminal style and case size can decide whether the replacement seats cleanly without strain on the wires.

JARD describes this as a round replacement for several 50 x 370 VAC capacitor models. The match is based on the uF and voltage rating, not just on the brand name printed on the old part.

The capacitor uses a snap-in mount and has a 50uF value. Its listed upper temperature rating is 70°C.

Quick-connect terminals suit a direct swap when the existing wires already use that style. If your wires use a different connection, pause and check fit before ordering.

This option makes sense when the motor label shows 50uF and 370 VAC, and when the terminal style and case size fit. The IWIWE option is more flexible when the original part uses a different voltage within its stated range.

JARD 50 uF x 370 VAC RoundCheck it on Amazon
6

Century USQ1152 1-1/2 HP: Best for a complete motor replacement

Century USQ1152 1-1/2 HP, pool pump capacitors
8.6/10Our score
  • 1-1/2 HP
  • 3450 RPM
  • 115/230 V
  • Capacitor start/capacitor run

This is a replacement pool motor rather than a loose capacitor. Choose it when the motor itself needs replacement and the 1-1/2 HP, 48Y frame, square flange and 115/230 V design match your equipment.

See it on Amazon

Pros

  • Complete 1-1/2 HP motor
  • Capacitor start/capacitor run design
  • 115/230 V

Cons

  • Not a capacitor-only repair
  • Requires full motor compatibility checks

The Century USQ1152 1-1/2 HP is included for the repair that turns out to need a complete replacement motor rather than a loose capacitor. For the full process, follow our pool pump motor replacement guide.

That distinction saves time. A new capacitor will not help if the motor itself is the failed part.

It has a 1.5 HP rating, 3450 RPM speed and 115/230 V voltage. Those three values frame the basic compatibility check.

Horsepower and speed tell you whether the replacement can handle the circulation job. Voltage tells you whether it suits the supply at your panel.

This Century motor uses a 48Y frame, capacitor start/capacitor run design, ODP enclosure and square flange. Those details must match the pump assembly before you choose it.

Frame and flange are physical checks, not fine print. A motor with the right horsepower can still fail to mount correctly.

The motor weighs 12 lb and includes the USQ1152 model component. It is not a substitute for a capacitor when the existing motor is otherwise suitable.

Compare it with our guide to the best century pool pump motor if your diagnosis has moved from a capacitor repair to a full motor change.

Century USQ1152 1-1/2 HPCheck it on Amazon
7

[UL Listed] BlueStars 25 uF MFD MFD: Best for 25 MFD run capacitors

[UL Listed] BlueStars 25 uF MFD MFD, pool pump capacitors
8.4/10Our score
  • 25uF ±5%
  • 370/440 VAC
  • 50/60 Hz
  • 10000 AFC anti-explosion pressure switch

BlueStars fits a motor that calls for a 25 MFD run capacitor at 370 or 440 VAC. Its round body, two top terminals and stated temperature range make it worth comparing with the old capacitor before ordering.

See it on Amazon

Pros

  • 25uF rating
  • 370/440 VAC replacement range
  • UL and CUL listed

Cons

  • Only for 25uF requirements
  • Dimensions need to match the motor compartment

The [UL Listed] BlueStars 25 uF MFD MFD 370 V VAC or 440 Motor Run Capacitor is the pick for a motor marked 25uF or 25 MFD. It replaces 370 or 440 VAC capacitors and has a ±5% tolerance.

That tight tolerance is useful when the motor is sensitive to the exact capacitance value. It does not make a 25uF part suitable for a 30uF or 35uF motor.

The round body measures 1.77 x 3.54 in. Measure the compartment height and wire clearance before ordering, since a slightly taller case can crowd the cover.

BlueStars identifies a 10000 AFC anti-explosion pressure switch, 50/60 Hz operation and an operating range from -25°C to +70°C. Those details suit motors that run for long periods in warm conditions.

The two top terminals are labeled for common, compressor or fan connections. Those labels can help when the old wiring has matching markings, but you should still photograph the original connections before removing them.

Labels are a guide, not a substitute for your own record. Wiring layouts can differ between brands and motor models.

Choose this for a 25uF run capacitor, not for a 30uF or 35uF motor. BlueStars also states that the part is UL and CUL listed.

[UL Listed] BlueStars 25 uF MFD MFDCheck it on Amazon
8

[UL Listed] BlueStars 270-324 uF MFD 110-125: Best for large 110-125 VAC starts

[UL Listed] BlueStars 270-324 uF MFD 110-125, pool pump capacitors
8.2/10Our score
  • 270-324uF range
  • 110-125 VAC
  • 50/60 Hz
  • 1.43 x 2.76 in round body

This BlueStars motor-start capacitor serves a different job from the lower-uF run capacitors above. Use it only when the motor's original part calls for the 270-324uF range at 110-125 VAC.

See it on Amazon

Pros

  • 270-324uF starting range
  • 110-125 VAC
  • UL and CUL listed

Cons

  • Wide ±20% tolerance
  • Not a general replacement for 370 VAC run capacitors

The [UL Listed] BlueStars 270-324 uF MFD 110-125 VAC Motor Start Capacitor is for motors that need a much larger starting capacitance than the run capacitors in this roundup. Its 270-324uF range and 110-125 VAC rating are the main selection points.

Read that range carefully. It describes a start capacitor, which is a different job from a run capacitor that stays in circuit during operation.

The round body measures 1.43 in x 2.76 in, with a ±20% tolerance and 50/60 Hz operation. BlueStars gives an operating range of -40°C to 65°C.

The wider tolerance suits this type of start application. It also means you should rely on the marked range and matching documentation rather than guessing an exact value.

This is a motor-start capacitor for applications that include pool pump capacitors, water pumps, compressors and general electric motors. It has two top terminals and a surface-mount design.

Two terminals keep the swap straightforward. Photograph the old wiring first, then match each connection on the new part.

Choose it only when the old capacitor or motor documentation calls for the same high range. It is not a replacement for a 370 VAC run capacitor.

[UL Listed] BlueStars 270-324 uF MFD 110-125Check it on Amazon
9

Genteq 97F9970: Best for 50 plus 5uF dual-run service

Genteq 97F9970, pool pump capacitors
7.9/10Our score
  • 50 + 5uF dual-run design
  • 370 VAC
  • Round body
  • EIA-456 compliant 60,000-hour reliability claim

The Genteq 97F9970 is a dual-run capacitor with separate 50uF and 5uF values in one round part. It belongs on the shortlist only when the original motor or equipment uses that same dual rating.

See it on Amazon

Pros

  • Dual 50 + 5uF design
  • 370 VAC
  • EIA-456 compliant reliability claim

Cons

  • Not a single-value capacitor
  • Confirm both capacitance values before ordering

The Genteq 97F9970 fits a dual-run repair where the original part uses 50 + 5uF at 370 VAC. Its two capacitance values make it different from the single-value 50uF capacitors above.

That dual design is the whole point of this pick. One case carries two values for equipment that needs both in a single part.

Genteq describes a round capacitor with high-grade metallized polypropylene film and an EIA-456 compliant 60,000-hour reliability claim. The model replaces GE number 97F9970.

Long life claims are helpful context, but they do not replace a rating check. Confirm both values on the old part before you order.

The part uses a through-hole mount and has a 370 VAC operating voltage. Mounting style and terminal placement need to suit your motor housing.

Confirm that your equipment needs both the 50uF and 5uF values before choosing it. A single-value motor will not use this part correctly.

This is a useful option when one dual-run part replaces the same dual rating. It is not the right match for a motor that uses only one 50uF capacitor.

Genteq 97F9970Check it on Amazon

What should you check before ordering a pool pump capacitor?

Check capacitance, voltage, capacitor type, size and terminals before you compare brands. These five checks prevent the most common mismatch.

1. Match capacitance

Read the old part for uF or MFD. The number may be 25, 30, 35, 50, 161-193 or 270-324.

A dual-run part may show two values, such as 50 + 5uF.

Do not choose a nearby number because the case looks similar. The motor's required capacitance controls the match.

2. Match voltage

A capacitor's voltage rating must meet the motor's requirement. Several picks cover multiple ratings, such as 370/440/450 VAC, while others are limited to 370 VAC or 110-125 VAC.

A 110-125 VAC start capacitor belongs to a different group from a 370 VAC run capacitor. Do not swap between those groups without confirming the motor design.

3. Identify start, run or dual-run design

Start capacitors support motor startup. Run capacitors remain part of the motor's operating circuit, while dual-run parts combine two capacitance values in one case.

The VEXUNGA 161-193uF and BlueStars 270-324uF options are start-focused choices. The Genteq 97F9970 is a dual-run option, and the other single-value picks require their own matching check.

4. Measure the replacement space

Measure the old body and the open space around it. Compare diameter, height, mounting style and terminal direction.

A 50uF capacitor may be 3.68 in, 3.94 in or another height depending on the model. Leave enough room for safe wiring and the motor cover to close without pressure on the capacitor.

5. Check the motor before blaming the capacitor

A pump that will not start may have a capacitor problem, but the motor, wiring, timer or other parts can also be involved. Turn off power before opening the housing and use the motor label to confirm the repair path.

If the motor itself needs replacement, compare horsepower, frame, voltage, speed, flange and enclosure. Our guide to best pool pump motor bearings may help when the issue is mechanical noise or worn bearings rather than capacitance.

How do you replace a pool pump capacitor safely?

A replacement starts with power off, a verified discharge and a clear record of the old wiring. Use the same capacitance and voltage requirements, then confirm the motor starts and runs normally after reassembly.

Take a photo before disconnecting any wire. Mark the terminals if needed, remove the old part only after following safe discharge procedures, and compare the replacement's markings with the old part.

The BlueStars 25uF instructions describe common, compressor or fan terminal labels. Other capacitors may use a different marking layout, so do not assume that every terminal has the same label.

Keep the old part until the repair is complete. Its label gives you the most useful evidence for capacitance, voltage and capacitor type.

If you are unsure how to discharge the capacitor or verify the wiring, use a qualified pool or electrical technician. A capacitor can store electrical energy even after the pump is switched off.

Which capacitor is best for a Hayward Super Pump?

The IWIWE 50UF capacitor is the most direct Hayward or Pentair choice in this roundup when the original part is 50uF. A Hayward Super Pump start capacitor or run capacitor still needs a motor-specific match.

Read the motor label and the old capacitor rather than choosing only by pump name. Hayward Super Pump models can use different motors and electrical requirements.

For a complete motor change, compare the Century USQ1152 only when its 1-1/2 HP, 48Y frame, square flange and 115/230 V design match your pump. A loose capacitor is usually the more focused repair when the motor itself is sound.

You may also need related parts during a pump repair. Our guide to the best Pentair pool pump basket covers basket replacement, while the best pool pump timer parts guide covers timer-related repairs.

Best pool pump capacitor: the final choice

Pick VEXUNGA 35uF when your motor calls for 35 MFD at a compatible 370/440/450 VAC rating. It is the clearest first choice for that common repair pattern.

Pick IWIWE 50UF for a matching 50uF Hayward or Pentair pool pump repair, and choose one of the high-uF models only when the motor's start requirement matches.

For 25uF, 30uF or 50uF repairs, stay with the exact capacitance and compare the voltage and body dimensions. A close value is still a mismatch.

Check capacitor type as well. Start, run and dual-run parts do different jobs in the motor circuit.

Measure the old part and the compartment space before you order. Diameter, height, mounting and terminal direction all affect fit.

If the capacitor values do not match the old part, pause the order and identify the motor model first. The motor plate and old label will point you to the right group.

When the motor itself is faulty, a capacitor swap will not fix the underlying problem. That is the point to compare a full motor replacement instead.

Our top 3 picks at a glance

  1. 1 VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC
    Best for common 35 MFD replacements

    VEXUNGA 35uF 35 MFD 370VAC 440VAC 450VAC

    9.7/10 our score

    See it on Amazon
  2. 2 VEXUNGA 161-193 uF MFD 110-125 VAC 50/60
    Best for high-capacitance motor starts

    VEXUNGA 161-193 uF MFD 110-125 VAC 50/60

    9.6/10 our score

    See it on Amazon
  3. 3 BOJACK 30 uf MFD 370V 450V AC
    Best for 30 MFD motor service

    BOJACK 30 uf MFD 370V 450V AC

    9.4/10 our score

    See it on Amazon

Frequently asked questions

How do I choose the best pool pump capacitor?

Match the old capacitor's capacitance, voltage, start or run design, physical size and terminal arrangement. A 35uF motor needs a different part from a 50uF motor, and a 110-125 VAC start capacitor is not a substitute for a 370 VAC run capacitor.

Turn off power and confirm the motor model before removing the old part.

What capacitor does a Hayward Super Pump use?

There is no single capacitor for every Hayward Super Pump. The correct Hayward Super Pump start capacitor or run capacitor depends on the motor model and the old part's capacitance and voltage.

Read the label on the existing capacitor and compare the motor's replacement information before choosing a 50uF or other value.

Can a 440 VAC capacitor replace a 370 VAC capacitor?

A higher voltage rating can be suitable when the capacitance, capacitor type, size and terminals also match. Several picks here cover both 370 and 440 VAC.

Do not use a lower voltage rating in place of the original, and follow the motor manufacturer's requirements.

What does uF or MFD mean on a pool pump capacitor?

uF and MFD both describe capacitance, or the capacitor's ability to store electrical energy. The number must match the motor's required value, such as 25uF, 35uF or 50uF.

The voltage rating is a separate check, so match both markings instead of choosing by capacitance alone.

Can I replace a pool pump capacitor myself?

A capacitor replacement involves stored electrical energy, so turn off and verify power before opening the motor housing. Photograph the wire positions, compare the new part's ratings with the old one and follow the motor instructions.

If you cannot verify that the capacitor is discharged, use a qualified technician.