Century Pool Pump Seal Kit: Replace the Shaft Seal
A Century motor does not identify the pump seal by itself. Match the shaft seal to the pump's wet end, then replace the seal with the power off and the pump fully drained.
On this page (7 sections)
- What does the Century motor tell you about the pump?
- How do you remove the old pump shaft seal?
- How do you install a replacement shaft seal?
- What should you inspect while the pump is open?
- How do you restart the pump after replacing the seal?
- Which Century pool pump seal kit should you choose?
- Frequently asked questions
A Century pool pump seal kit must match the pump's wet end, not just the Century motor attached to it. Turn off power, drain the pump, identify the wet-end model, and replace the shaft seal without touching its polished sealing faces.
The motor spins the impeller, but the wet end contains the housing, seal plate, impeller, diffuser, lid, and drain plugs. Start with the pump's complete model and part numbers before choosing a seal or rebuild kit.
For a wider look at equipment choices, read our guide to pool pumps and filters.
What does the Century motor tell you about the pump?
A Century motor identifies the replacement motor or drive assembly, but it does not prove which shaft seal fits the pump. Many wet-end designs can use different seal sizes, materials, and mounting arrangements.
Find the model label on the pump housing, seal plate, or motor label. Record the pump brand, wet-end model, impeller part number, and any markings on the old seal before opening the pump.
The pump's wet end is the side connected to the plumbing. It usually has the strainer lid at the front, the pump housing around the impeller, and the motor bolted to the rear.
Why should you identify the wet end before buying a century pool pump seal kit?
The wet end determines the seal fit. A Century motor can be paired with a pump made by another brand, so ordering by motor name alone may result in the wrong seal.
Check the replacement instructions for the pump model. If you cannot find a readable model label, compare the old seal, impeller, seal plate, and housing parts with the replacement information before ordering.
A seal kit may include more parts than the shaft seal alone. That can help when several rubber seals are worn, but it does not make an incompatible kit fit a different pump.
How do you remove the old pump shaft seal?
Switch off the pump at the circuit breaker and confirm that it cannot start. Close the valves, release pressure, drain the pump, and remove the motor assembly according to the pump manual.
Take photos before removing parts. Mark the order of the diffuser, impeller, seal plate, gaskets, and hardware so you can return each part to its original location.
Remove the pump cover and diffuser if your design uses one. Hold the motor shaft as instructed by the manufacturer, then remove the impeller without bending the shaft or damaging the threads.
The old shaft seal sits around the motor shaft between the impeller and seal plate. Remove both halves carefully, and inspect the seal plate for grooves, cracks, or melted areas.
Do not reuse a seal that has been overheated, scratched, or contaminated. A new seal cannot correct a damaged sealing surface.
How do you install a replacement shaft seal?
Keep the seal faces clean, dry, and correctly oriented. Press the seal into place using even pressure and the method specified for your pump, without striking the ceramic or carbon face.
Clean the shaft and seal plate before installation. Remove grit, old rubber, and residue that could hold the seal out of position.
Avoid oil, grease, or unapproved lubricant on the polished faces. If the kit includes O-ring lubricant, use it only on the rubber O-rings and other areas where the instructions allow it.
Reinstall the impeller, diffuser, seal plate, and gaskets in the correct order. Tighten fasteners evenly so the housing and seal plate sit flat.
Can a rebuild kit help during a shaft-seal repair?
A rebuild kit helps when the pump has several worn sealing parts, not just a leaking shaft seal. Match every kit to the wet-end brand, series, manufacture date, and part numbers before using it.
The BadAss Pool Supply O-Ring Rebuild Repair Kit is for Pentair WhisperFlo and IntelliFlo pumps built 2-1-2008 and later. It includes a black seal plate gasket, lid O-ring, diffuser O-ring, impeller gasket, 2 drain plug O-rings, water slinger, US Seal Mfg.
PS-1000 shaft seal, directions, and O-ring lube.

A complete 8-piece O-ring rebuild kit for later-built Pentair WhisperFlo and IntelliFlo pumps, including a PS-1000 shaft seal and O-ring lubricant.
See it on AmazonChoose this kit only when the pump's manufacture date and wet-end series match. The pump date may be on its plastic housing; if you cannot locate it, use the pump serial number to confirm compatibility with Pentair.
The Pokin O-Ring Rebuild Repair Kit includes a PS-1000 shaft seal, black seal plate gasket, 2 drain plug O-rings, impeller gasket, lid O-ring, diffuser O-ring, water slinger, and O-ring lubricant. Its title identifies Pentair WhisperFlo and IntelliFlo pumps built 2-1-2008 and later, while its description gives a different manufacture-date range, so verify the exact pump model and date before ordering.

A Pentair WhisperFlo and IntelliFlo seal kit with the PS-1000 shaft seal, gaskets, O-rings, water slinger, and lubricant for a broader rebuild.
See it on AmazonThis kit does not include the pump motor, impeller, or housing. If the housing is cracked, replacing gaskets alone will not repair that structural leak.
For a complete repair comparison, see our guide to the best pool pump rebuild kit.
What should you inspect while the pump is open?
Inspect the impeller, diffuser, seal plate, and housing before closing the pump. Replace only the parts that match your pump and repair plan.
A damaged impeller can affect water movement and may damage a new seal if it rubs or sits incorrectly. A worn diffuser can also affect the fit and water path.
If the pump housing is cracked, a new shaft seal will not solve the leak. Our guide to the best pool pump housing replacement can help if the housing is beyond repair.
The Pacer Pumps 58-702EP-U 'S' Series EPDM Water Pump Rebuild Kit with Volute, Impeller, Seal and Hardware is for S Series EPDM-fitted Pacer pumps with a 706-30 5-vane impeller, including SEB2UL, SE2UL, SE2CL, SE2IL, and SE3NL models. It includes the internal components named in its title, including the volute, impeller, seal, and hardware.

A complete Pacer S Series rebuild option for listed models using a 706-30 5-vane impeller and EPDM-fitted pump parts.
See it on AmazonThis is a Pacer rebuild kit, not a general Century motor seal kit. Choose it only when your wet end is a compatible Pacer S Series pump.
If the impeller itself is damaged, compare replacement options in our guide to the best pool pump impeller replacement. For diffuser damage, see the best pool pump diffuser guide.
How do you restart the pump after replacing the seal?
Prime the pump, open the valves, and check for leaks before leaving it running. Fill the strainer pot as directed, secure the lid, and start the pump only after the system is ready.
Watch the shaft-seal area, drain plugs, lid, housing seam, and unions during startup. A small drip near the motor-to-wet-end joint can indicate an incorrectly seated or damaged seal.
Stop the pump if water reaches the motor or electrical connections. Do not operate the pump with a persistent leak, unusual noise, or a dry strainer pot.
After the pump runs normally, check the water flow and pressure. A seal replacement should not be used to ignore a separate problem with the filter or circulation system.
An automatic cleaner also does not replace filtration. Read why an automatic cleaner does not replace the pool filter if circulation and debris control are being confused.
Which Century pool pump seal kit should you choose?
Choose by the wet-end model first, then by the seal and rebuild parts required. A Century motor label alone is not enough for a safe match.
Choose the BadAss kit when you have a Pentair WhisperFlo or IntelliFlo pump built 2-1-2008 or later and want its listed O-rings, gasket, water slinger, and PS-1000 shaft seal. Consider the Pokin kit when its Pentair series and date information match your pump, but resolve the conflicting date ranges before ordering.
Choose the Pacer kit only for the listed Pacer S Series models with the 706-30 5-vane impeller. If you need a different pump part, inspect the wet end and use the matching replacement guide.
The main rule for a century pool pump seal kit is simple: identify the wet end, confirm every part number, install the seal faces correctly, and test for leaks before returning the pump to normal service.
Frequently asked questions
Can I choose a pool pump seal kit by the Century motor model?
No. The Century motor is the drive side of the pump.
The shaft seal must match the pump's wet end, including the seal plate, impeller, shaft size, and seal design. Identify the wet-end brand and model before ordering, then compare the old seal and pump parts with the replacement kit.
How do I know which way to install a pool pump shaft seal?
The ceramic and carbon faces must meet in the correct orientation, while the rubber parts seat against their matching surfaces. Follow the pump manual or seal instructions, keep the faces clean, and never touch the sealing faces with dirty or greasy fingers.
Can I replace a Century pool pump seal without replacing the motor?
Yes, a leaking shaft seal can often be replaced without changing the Century motor. The motor must be removed from the wet end so you can reach the impeller and seal.
Replace the motor only if it has a separate electrical or mechanical fault.
What else should I inspect while replacing a pump shaft seal?
Inspect the impeller, seal plate, diffuser, housing, O-rings, and drain-plug seals while the pump is open. A cracked housing or damaged sealing surface can keep leaking after a new shaft seal is installed.
Frequently asked questions
Can I choose a pool pump seal kit by the Century motor model?
No. The Century motor is the drive side of the pump.
The shaft seal must match the pump's wet end, including the seal plate, impeller, shaft size, and seal design.
Identify the wet-end brand and model before ordering, then compare the old seal and pump parts with the replacement kit.
How do I know which way to install a pool pump shaft seal?
The ceramic and carbon faces must meet in the correct orientation, while the rubber parts seat against their matching surfaces. Follow the pump manual or seal instructions, keep the faces clean, and never touch the sealing faces with dirty or greasy fingers.
Can I replace a Century pool pump seal without replacing the motor?
Yes, a leaking shaft seal can often be replaced without changing the Century motor. The motor must be removed from the wet end so you can reach the impeller and seal.
Replace the motor only if it has a separate electrical or mechanical fault.
What else should I inspect while replacing a pump shaft seal?
Inspect the impeller, seal plate, diffuser, housing, O-rings, and drain-plug seals while the pump is open. A cracked housing or damaged sealing surface can keep leaking after a new shaft seal is installed.
About this guide: Our look at replacing a pool pump shaft seal with a Century motor draws on maker specs, materials and what owners report. See how we research.


