Guide

How to Use an Aiper Pool Cleaner

Updated on · By the Pool Care Pilot team

To use an Aiper pool cleaner, charge it as its manual directs, select a mode, lower it into the water, and remove it after the cycle. Rinse and dry the unit as instructed, then clean its filter before storage.

On this page (9 sections)
  1. How do you use an Aiper pool cleaner for the first time?
  2. How should you charge an Aiper pool cleaner?
  3. How do you launch an Aiper pool cleaner?
  4. How do you retrieve an Aiper pool cleaner?
  5. What should you clean after each cycle?
  6. How do you store an Aiper pool cleaner?
  7. What should you check if an Aiper cleaner will not start?
  8. Which Aiper cleaner should you choose for your pool?
  9. How do you use an Aiper pool cleaner safely and consistently?

To use an Aiper pool cleaner, charge it as its manual directs, choose a cleaning mode, lower it into the pool, and retrieve it when the cycle ends. Clean the filter and follow the model's instructions for rinsing, drying, and storage.

The exact controls and charging steps vary by model. Check your cleaner's manual before its first run, and use its instructions for pool compatibility, water depth, and safe handling.

How do you use an Aiper pool cleaner for the first time?

For a first run, charge the cleaner, check the filter, select a suitable mode, and lower it into the water as the manual shows. Keep the charging equipment away from water, and don't start the cleaner until it is disconnected from the charger or dock as directed.

A cordless robot works differently from a suction-side or pressure-side cleaner. See how automatic pool cleaners work for a quick comparison of cleaner types.

Before launching, remove loose toys and check that the pool is ready for cleaning. If the manual calls for a clear waterline or a particular water level, follow that guidance.

How should you charge an Aiper pool cleaner?

Charge an Aiper cleaner using the charger or dock made for that model. Follow the manual for charging time, indicator lights, and any steps required before or after charging.

Some Aiper cleaners use a dock, while others use a cable or a different charging setup. The Scuba X1 Pro Max is described as having wireless charging, but that feature doesn't apply to every Aiper model.

Keep charging contacts and electrical equipment dry whenever the manual requires it. Don't charge a wet unit or handle a plug with wet hands.

If you're comparing models before buying, our guide to the best Aiper pool cleaner options can help you match cleaning features to your pool.

How do you launch an Aiper pool cleaner?

Lower the cleaner into the pool using the method shown in its manual. Place it in the water gently, keep the charging cable or dock on dry ground, and avoid dropping it or pulling it by a moving part.

Select the mode before or after placing it in the pool, depending on the model's controls. For the Scuba X1 Pro Max, the available modes include Skim, Eco, and Max; Aiper's instructions for that model explain when to choose each one.

Let the cleaner begin its cycle without pushing it along the floor. If you want a robot that handles several surfaces, read the Aiper Scuba X1 Pro Max review for more detail on its stated cleaning features.

How do you retrieve an Aiper pool cleaner?

Use the handle, hook, or parking function specified for your model, then lift the cleaner slowly and let excess water drain. Don't reach for a cleaner while its brushes or other moving parts are running.

The Scuba X1 Pro Max is described as parking at the pool's edge after its cycle. Other models may need to be located and lifted manually, so check the manual before you begin.

Avoid lifting a heavy cleaner by its filter lid or power button. If the unit is awkward to reach, use only an approved retrieval tool.

Can you use a hook to lift an Aiper cleaner?

Use a pool pole and hook only if the cleaner's manual allows that method. The right attachment point matters, since pulling on a brush, cover, or filter latch may damage the unit.

Move slowly and keep the pole clear of people in the water. If your cleaner parks at the edge, follow the model's steps to lift it from there.

What should you clean after each cycle?

After a cycle, remove debris from the filter and rinse the parts the manual says are washable. Empty the filter before debris dries, and check the intake and brushes for leaves or tangled material.

Don't use a pressure washer or cleaning chemical unless the manual approves it. Refit the filter and covers securely before the next run.

The Polaris Vac-Sweep 280 is a pressure-side cleaner for in-ground pools and uses a separate booster pump. It isn't an Aiper robot, but it may help readers comparing how different cleaner types collect debris.

How do you store an Aiper pool cleaner?

Store the cleaner as its manual directs, with the unit and charging equipment protected from water and harsh weather. Keep it away from direct sun or freezing conditions if the manufacturer warns against them.

Before putting it away, clean the filter, check the body and charging contacts, and let parts dry when required. Store the charger or dock in a dry place, and don't coil a cable tightly if the manual says to avoid it.

Use a cover when the pool is not in use to limit leaves and other debris entering the water. Our pool covers buying guide explains the main cover types and what they do.

What should you check if an Aiper cleaner will not start?

If the cleaner won't start, check its charge, power controls, filter seating, and any error indicator. Then follow the troubleshooting steps for your exact model rather than repeatedly pressing buttons or opening sealed parts.

Confirm the cleaner is fully disconnected from its charger or dock if required. Clear debris from the filter and intake, but switch the unit off before handling those areas.

If it still won't run, contact Aiper support with the model name and the indicator or error message. Don't attempt electrical repairs or use a charger that wasn't made for the cleaner.

Which Aiper cleaner should you choose for your pool?

Choose a cleaner based on the surfaces you need cleaned, the debris you see, and the steps required to charge and retrieve it. A robot that cleans multiple surfaces may suit a different routine than a pressure-side cleaner that relies on a booster pump and debris bag.

The Scuba X1 Pro Max is described as covering the floor, walls, waterline, and water surface. For more on that model, see our Aiper Scuba X1 Pro reviews and compare its features with your pool's needs.

If you have a vinyl pool, check the cleaner's compatibility before buying; our guide to the best pool cleaner for vinyl pools focuses on that surface. For a non-robotic alternative, compare Pentair Kreepy Krauly cleaners and how a suction-side pool cleaner moves.

How do you use an Aiper pool cleaner safely and consistently?

To use an Aiper pool cleaner well, follow the model's manual for charging, mode selection, launching, retrieval, and filter care. Clean the filter after use, store the unit as directed, and contact the maker if an error persists.

Pick a model with controls and retrieval steps that fit your routine. If you want surface cleaning or automatic parking, verify that the specific Aiper model includes those features before choosing it.

Frequently asked questions

How long should an Aiper pool cleaner charge?

Charge it for the time and with the charger or dock specified in the manual for your exact model. Aiper models differ, so don't use another cleaner's charge time as a guide.

Before charging, check that the unit and charging contacts are dry if the manual requires it.

Can you leave an Aiper pool cleaner in the pool?

Follow the manual for your model's cycle and storage instructions, and remove the cleaner when the cycle ends if directed. Take it out for routine filter care and whenever the manual says to store it dry.

Don't assume a cordless design means it can remain submerged between cleanings.

How do you get an Aiper pool cleaner out of the pool?

Use the retrieval method in the manual, such as a supplied handle or hook if your model includes one. Keep your hands away from moving parts, lift slowly, and let water drain before carrying it.

Some models offer a parking feature, but not every Aiper cleaner does.

How often should you clean an Aiper pool cleaner filter?

Check and clean the filter after each cycle or as the manual directs, especially after a heavy debris load. Turn the cleaner off, remove the filter without forcing its clips, and rinse away debris.

Let parts dry as directed before storage.