Review

Zodiac MX8 Pool Cleaner Review: Worth It? (November 2026)

Updated on · By the Pool Care Pilot team

The Zodiac MX8 is best for pool owners who want tracked movement and cyclonic scrubbing from a suction-side cleaner. Compare the MX6 for a smaller tracked option, or the G3 for a simpler disc-style cleaner.

Zodiac Cyclonic Scrubbing Turbine Assembly MX8 Pool, the Zodiac MX8 pool cleaner

In this review

Zodiac Cyclonic Scrubbing Turbine Assembly MX8 Pool

Best for upgrading an MX89.6/10

See it on Amazon
On this page (7 sections)
  1. Is the Zodiac MX8 a good choice?
  2. How does the Zodiac MX8 compare with the MX6?
  3. How does the Zodiac MX8 compare with the G3?
  4. What should you check before choosing a suction-side cleaner?
  5. Are tracked cleaners better than wheeled or disc cleaners?
  6. How should you set up and care for these cleaners?
  7. Zodiac MX8 pool cleaner reviews: which option should you choose?

The Zodiac MX8 is a strong fit for buyers looking for a suction-side pool cleaner with scrubbing action and tracked movement. This review also compares the MX8-related turbine assembly with the Zodiac G3 and MX6, because the right choice depends on whether you need an upgrade part or a complete cleaner.

The MX8 assembly is not a complete replacement cleaner. It is an MX8 or MX8 Elite upgrade or replacement part, while the G3 and MX6 are complete suction-side pool cleaners.

Is the Zodiac MX8 a good choice?

The Zodiac MX8 makes the most sense when you already have an MX8 cleaner or MX8 Elite and want the Cyclonic Scrubbing Turbine Assembly. Model R0714300 adds a focused upgrade path without changing the decision into a search for a different complete cleaner.

1

Zodiac Cyclonic Scrubbing Turbine Assembly MX8 Pool: Best for upgrading an MX8

Zodiac Cyclonic Scrubbing Turbine Assembly MX8 Pool, the Zodiac MX8 pool cleaner
9.6/10Our score
  • Cyclonic Scrubbing Turbines
  • MX8 and MX8 Elite fit
  • Model R0714300
  • User assembly

A replacement or upgrade assembly for an MX8 cleaner or MX8 Elite. Its Cyclonic Scrubbing Turbines are intended to add scrubbing action for debris removal.

See it on Amazon

Pros

  • Designed for MX8 or MX8 Elite use
  • Cyclonic Scrubbing feature
  • User-assembly installation

Cons

  • It is an assembly rather than a complete pool cleaner
  • Fit is specific to the MX8 family

The assembly uses plastic construction, blue color and user-assembly installation. Its stated purpose is specific, so check your cleaner model before ordering and make sure you need an MX8-family assembly rather than a full pool cleaner.

If you need a complete suction-side machine, compare the best suction side pool vacuum cleaner options by connection type, movement system, hose length and pool surfaces.

What the MX8 turbine assembly does

The assembly uses Cyclonic Scrubbing Turbines for scrubbing action and advanced debris removal. In daily use, that means the part is aimed at the contact and debris-removal work associated with an MX8 cleaner rather than acting as an independent vacuum.

The product is identified as model R0714300 and weighs 0.61 kg. It has a limited warranty type with a stated 1-year warranty description, but confirm the current terms before relying on coverage.

The key buying question is fit. An assembly can be useful when the rest of your MX8 is still the right match for your pool, but it cannot replace missing hoses, connections or the complete cleaner.

How does the Zodiac MX8 compare with the MX6?

The MX6 is the closer complete-cleaner alternative because it also uses cyclonic suction and tracked movement. Its X-Trax provide grip, while hydraulic suction drives the X-Drive Navigation system.

3

Zodiac MX6 Suction-Side In-Ground Pool Cleaner: Best for compact tracked cleaning

Zodiac MX6 Suction-Side In-Ground Pool Cleaner, the Zodiac MX8 pool cleaner
9.7/10Our score
  • Cyclonic Turbine
  • X-Trax
  • X-Drive Navigation
  • 32 ft Twist Lock Hose

A compact suction-side cleaner with tracked X-Trax, hydraulic X-Drive Navigation and a Cyclonic Turbine. It connects through a skimmer or dedicated suction line.

See it on Amazon

Pros

  • No batteries or additional electricity
  • X-Trax provides grip
  • Includes connection accessories

Cons

  • Shorter hose than the G3
  • Requires correct flow calibration

The MX6 connects to a dedicated suction line or the pool skimmer and sends debris to the pool filtration system. It includes a 32 ft Twist Lock Hose and connection accessories for either installation route.

The MX6 is described as compact and measures 40.4 in long, 14.8 in wide and 9.9 in high. Its design does not need batteries or additional electricity, but it does need correct flow calibration and a working pool pump suction setup.

Read our Zodiac MX6 Pool Cleaner Review for a closer look at its hose reach, wall climbing and flow setup.

The MX6 is a better comparison when you want a complete cleaner with tracked movement. The MX8 assembly is the more direct choice when you already own the matching MX8 cleaner and only need the scrubbing turbine part.

How does the Zodiac MX8 compare with the G3?

The G3 takes a simpler approach with a 36-Fin Disc, wheel deflector and one moving part. It is designed for in-ground pool floors, walls and steps, and it connects to a skimmer or dedicated suction line.

2

Zodiac G3 Suction-Side Inground Vacuum Pool Cleaner: Best for simple suction cleaning

Zodiac G3 Suction-Side Inground Vacuum Pool Cleaner, the Zodiac MX8 pool cleaner
9.7/10Our score
  • 36-Fin Disc
  • 39 ft push-fit hose
  • Wheel deflector
  • Low-flow and variable-speed pump compatibility

A suction-side cleaner for in-ground pools with a 36-Fin Disc, wheel deflector and 39 ft hose. It suits buyers who prefer a simple setup with one moving part.

See it on Amazon

Pros

  • Works across tile, vinyl, gunite and fiberglass
  • Includes 39 ft hose
  • FlowKeeper Valve helps regulate water flow

Cons

  • Uses suction from the pool system
  • Disc-style movement may not suit every pool layout

The G3 includes a 39 ft push-fit feed hose. Its wheel deflector helps with tight corners, while the 36-Fin Disc is designed to maintain adhesion and avoid hang-ups on lights, drain covers and fittings.

The cleaner works with tile, vinyl, gunite and fiberglass surfaces. Its FlowKeeper Valve regulates water flow, which helps it work with low-flow and variable-speed pumps.

The G3 is a complete cleaner, not an MX8 replacement part. Choose it when you want a new suction-side setup with a longer hose and disc-based movement.

For another tracked-cleaner comparison, see the Polaris MAXX Pool Cleaner Review. It can help you compare movement systems before deciding whether the MX8 style suits your pool.

What should you check before choosing a suction-side cleaner?

Check the connection point, pump flow, hose reach and pool layout before choosing among these products. A cleaner can have useful movement features and still be a poor match if the hose cannot reach or the suction line is unsuitable.

Start by confirming whether your pool uses a skimmer connection, a dedicated suction line or both. The MX6 and G3 support these connection routes, but setup still depends on the pool's plumbing and the correct flow.

Next, measure the pool's practical reach. The G3 includes a 39 ft hose, while the MX6 includes a 32 ft hose.

Allow for the distance from the connection point to the far wall, curves around corners and any hose arrangement needed for free movement.

Pump behavior matters too. Suction-side cleaners use the pool circulation system, so flow adjustments can affect movement and coverage.

Follow the cleaner's setup instructions and avoid guessing if the cleaner stalls, sticks or moves too quickly.

Our guide to How Do Automatic Pool Cleaners Work? explains how suction, pressure and robotic systems differ.

Are tracked cleaners better than wheeled or disc cleaners?

Tracked cleaners can offer grip and controlled movement, while disc-style cleaners focus on surface adhesion and simple suction cleaning. Neither design is automatically best for every pool.

The MX6 uses X-Trax and X-Drive Navigation. Those features are useful when you want a compact tracked cleaner that can use hydraulic suction to move across the pool and climb walls when set to the proper flow.

The G3 uses a 36-Fin Disc and wheel deflector. This setup may suit buyers who value a simple three-step connection process, longer included hose and compatibility with several in-ground pool surfaces.

The MX8 turbine assembly adds scrubbing action to an MX8 or MX8 Elite. It is therefore a part-level choice, not a direct alternative to a complete tracked or disc cleaner.

See How Do Tracked Pool Cleaners Differ from Wheeled Cleaners? for the movement differences that matter during setup and everyday cleaning.

How should you set up and care for these cleaners?

Set up a suction-side cleaner by checking the hose, connection, flow and movement in the pool. Keep the hose clear of tight bends, confirm the cleaner can reach the needed areas and adjust flow according to the product instructions.

For the G3, the basic connection uses the disc, wheel deflector and hose before connecting to the skimmer or dedicated suction line. For the MX6, use the included Twist Lock Hose and connection accessories with the correct suction route.

Rinse and clean the filter regularly when the pool system requires it. Check hoses, discs, turbines and other moving parts for wear, and store the cleaner in a dry place when it is not in use.

Avoid pulling a cleaner by its hose or leaving parts in a position that creates sharp bends. Regular checks can help you spot a worn connection or damaged moving part before it affects coverage.

Zodiac MX8 pool cleaner reviews: which option should you choose?

Choose the Zodiac Cyclonic Scrubbing Turbine Assembly if you already have an MX8 or MX8 Elite and want the R0714300 scrubbing upgrade or replacement.

Choose the Zodiac G3 if you want a complete in-ground suction cleaner with a 36-Fin Disc, wheel deflector and 39 ft hose. Its stated surface range and FlowKeeper Valve make it a practical choice for buyers focused on simple suction cleaning.

Choose the Zodiac MX6 if you prefer a compact complete cleaner with X-Trax, X-Drive Navigation, cyclonic suction and a 32 ft hose. The best decision comes down to the part you need, the pool connection you have and the movement style that fits your pool.

Frequently asked questions

Is the Zodiac MX8 a suction-side pool cleaner?

Yes. The Zodiac MX8 uses the pool system's suction setup, so it belongs to the suction-side cleaner group.

Before choosing one, confirm that your pool has a suitable skimmer or dedicated suction line and that your pump flow can support the cleaner's required operation.

What does the Zodiac MX8 scrub?

The MX8 uses Cyclonic Scrubbing Turbines to add scrubbing action while it removes debris. That makes the scrubbing assembly relevant when you want to upgrade an MX8 or replace an MX8 Elite assembly, but it is not a complete cleaner by itself.

Is the Zodiac MX6 smaller than the MX8?

The Zodiac MX6 is described as a compact suction-side cleaner and measures 40.4 in long, 14.8 in wide and 9.9 in high. The supplied product data here does not give matching MX8 cleaner dimensions, so compare the available clearance and hose reach for your pool.

Should you choose the Zodiac G3 or MX6?

Choose the Zodiac G3 if you want a 36-Fin Disc, wheel deflector and 39 ft hose for an in-ground pool. Choose the MX6 if tracked X-Trax movement, X-Drive Navigation and a compact design better match your pool layout and preferred setup.