7 Best Pool Cover Clips for Above Ground Pools (November 2026)
The best best above ground pool cover clips include the Beeplove 60 Pcs 4.7 Winter Pool Cover for close spacing around large pools, the EQUIPTZ Spring Clamps 4 inch for thin rails and general clamping, and the Beeplove 28 Pcs Winter Pool Cover Clips for steel wall pools on a budget count.
On this page (9 sections)
- How we compared these above ground pool cover clips
- The best above ground pool cover clips for most steel wall pools
- How many clips do you need for your pool?
- Which clips fit steel wall, resin and framed pools?
- Rail clips vs spring clamps vs two-piece locks
- Plastic, stainless steel or resin: which material should you pick?
- How do you install clips so the cover stays tight?
- What other cover gear do clips work with?
- Verdict: which above ground pool cover clips should you buy?
The best above ground pool cover clips for most owners are the Beeplove 60 Pcs 4.7 inch clips, because close spacing matters more than any single clip in wind. If your cover is thick or your rail is wide, the Fabflame kit with a 3.7 inch jaw is stronger.
If you want a lock that snaps over the cover, the Gladon two-piece system works differently from a clamp.
Clips do one job well. They hold the cover edge down at the rail so wind cannot start lifting it.
They do not replace a cable, rope or weight system in the middle of a large cover. Start with the clip type that fits your rail, then add tension across the cover.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared jaw opening, material, count and fit limits, then matched each pick to a pool type.
Our picks at a glance
-
1
Best for close spacing around large poolsBeeplove 60 Pcs 4.7 Winter Pool Cover
9.7/10 our score
See it on Amazon -
2
-
3
Best for steel wall pools on a budget countBeeplove 28 Pcs Winter Pool Cover Clips
9.5/10 our score
See it on Amazon
- 4
Check itFabflame Pool Cover Clips Kit and Pool
Best for thick covers and wide rails - 5
Check itAugisteen 30 PCS Pool Cover Clips Stainless
Best for stainless steel with a 3.15 inch opening - 6
Check itBeeplove 48 Pcs Pool Cover Clips
Best for steel wall pools needing many clips - 7
Check itGladon CLJR5012B-04 2-Piece Premium Swimming Pool Cover
Best for two-piece locking on top rails
How we compared these above ground pool cover clips
We checked each clip against pool type first. Steel wall pools, metal rail pools, resin rail pools and framed soft sided pools all have different edges.
A clip that fits one edge may not fit another.
We looked at jaw opening next. A 2 inch jaw and a 3.7 inch jaw are not close.
The wider jaw handles thick winter covers and solar blankets. The narrower jaw suits thin rails and light covers.
We also weighed count. Ten clips can work on a small pool.
A large round or oval pool can need 40 or more clips to keep spacing tight. We noted material too, since plastic, stainless steel and resin behave differently in sun and cold.
The best above ground pool cover clips for most steel wall pools
Beeplove 60 Pcs 4.7 Winter Pool Cover: Best for close spacing around large pools
- 60 clips, 4.7 in long
- 1.2 in wide, 0.63 in high
- Butadiene plastic, black
- For permanent above ground pools with metal railings
- Not for soft sided, inflatable or steel frame pools
A large pack of 4.7 inch clips for permanent above ground pools with metal railings. The count helps you keep tension even around round or oval edges.
Pros
- 60 clips for close spacing
- 4.7 in length for cover overlap
- No rust in plastic body
Cons
- Not for soft sided or inflatable pools
- Plastic, not stainless steel
The Beeplove 60 Pcs 4.7 inch clips suit owners of permanent above ground pools with metal railings. The 60 count is the main reason it leads this list.
You can place clips close together around a round or oval edge without buying a second pack.
Each clip is 4.7 inches long, 1.2 inches wide and 0.63 inches high. That size gives enough overlap to grip the cover and rail without a bulky profile.
Beeplove says the butadiene material has hardness, strength and toughness, with tight clamping and no rust.
The trade-off is fit. These clips are not for soft sided pools, inflatable pools or steel frame pools.
If your pool has a thin framed rail rather than a permanent metal rail, this is the wrong pick. Choose a clip made for your exact rail.
For wind protection, spacing matters as much as strength. Beeplove says strong wind and bad weather in winter are the target use.
Pair these clips with a cable or strap system for large covers, since clips alone do not control the center.
EQUIPTZ Spring Clamps 4 inch: Best for thin rails and general clamping
- 10 pack, 4 in long
- 2 in max jaw opening
- Best for items up to 1.5 in thick
- 20 lb clamping grip
- Plastic body, rubber handles, coated steel spring
General purpose spring clamps with a 2 inch jaw for rails up to 1.5 inches thick. Use several around a wind exposed cover.
Pros
- Wide jaw pads
- Rubber handles for grip
- Anti-rust coated spring
Cons
- Only 10 clips
- Not sized for thick rails over 1.5 in
The EQUIPTZ Spring Clamps 4 inch suit buyers who need a general clamp that also works on a pool cover. Each clamp is 4 inches long with a 2 inch maximum jaw opening.
EQUIPTZ recommends them for items up to 1.5 inches thick, such as poles and rails.
The 20 pound clamping grip is strong for the size. Soft rubber handles help your hand hold the clamp during a firm squeeze.
The body is plastic, and the spring is manganese steel with an anti-rust coating. Wide jaw pads stay in place during use.
The trade-off is count and purpose. You get 10 clips, so this suits a small pool, a solar blanket or a temporary cover better than a large winter cover.
For a large or wind exposed cover, EQUIPTZ says to use several clamps. You may need two packs.
Choose these for thin rails up to 1.5 inches thick. Skip them if your rail plus cover stack is thicker than that, or if you need 30 or more clips at once.
Measure the rail and cover together before you order.
Beeplove 28 Pcs Winter Pool Cover Clips: Best for steel wall pools on a budget count
- 28 clips, 4.3 in long
- Polypropylene, black
- Heavy duty spring design
- Tool-free slide on
- For steel wall pools, not soft sided or metal framed with railings
Spring clips sized for steel wall pools with tool-free installation. The 28 count fits many pools, with extra clips for larger edges.
Pros
- Spring pressure for firm grip
- Rounded handles for cold use
- Tool-free on and off
Cons
- 28 count may need more for large pools
- Not for soft sided or inflatable pools
The Beeplove 28 Pcs Winter Pool Cover Clips suit steel wall above ground pools. Each clip is 4.3 inches long in the title, with a 4.5 by 3.5 inch listed size.
The material is polypropylene, which Beeplove describes as strong and weather resistant.
The spring design applies constant pressure for a firm grip. Rounded handles make the clips easier to use in cold weather.
Installation is tool-free, since you slide the clip over the cover and wall. Removal is also quick when you open the pool in spring.
The trade-off is compatibility and count. These clips are not for soft sided pools, inflatable pools or metal framed pools with railings.
The 28 count covers many steel wall pools, but larger pools will need more clips to keep tension even around the edge.
Pick this set if you have a steel wall pool and want spring pressure without metal jaws. Pick the 60 piece Beeplove set above if you want closer spacing or a larger perimeter.
Clean and dry the clips when not in use, as Beeplove advises.
Fabflame Pool Cover Clips Kit and Pool: Best for thick covers and wide rails
- 10 stainless steel clips plus 4 straps
- 5.5 in long, 3.7 in jaw opening
- Soft PVC sleeves on grip ring
- Inward-rolled jaw edges
- Fits round, oval and rectangular rails
Stainless clips with a wide 3.7 inch jaw for thick winter covers and solar blankets. Four straps help fold and store the cover at the pool wall.
Pros
- Wide jaw for thick covers
- PVC sleeves cushion contact
- Straps aid solo handling
Cons
- Only 10 clips in the kit
- Measure rail before ordering
The Fabflame Pool Cover Clips Kit suits owners with thick winter covers, solar blankets or wide top rails. Each clip is 5.5 inches long with a 3.7 inch jaw opening.
That jaw can grip thick covers that a 2 inch clamp cannot close over.
The clips are stainless steel with a heavy-duty spring. Soft PVC sleeves sit on the grip ring, and the jaw tips have inward-rolled edges.
Fabflame says that combination cushions contact with the cover and sits more gently on the rail. It is a practical detail for metal clips.
The kit also includes 4 adjustable straps. After you remove the cover, you can fold it and strap it to the pool wall to keep it off the ground.
That helps solo handling and storage between uses. The straps are nylon with quick-release buckles.
The trade-off is count. You get 10 clips, which may not be enough for a large pool.
Fabflame says the clips generally fit steel, resin and hybrid rails on round, oval and rectangular pools, but it also says to measure your rail first. Do that before you rely on this kit alone.
Augisteen 30 PCS Pool Cover Clips Stainless: Best for stainless steel with a 3.15 inch opening
- 30 stainless steel clips
- 5.12 in long
- Up to 3.15 in opening
- Inward-rolled opening
- For above ground pools
Thirty stainless clips with a 3.15 inch opening for most above ground pool edges. The rolled opening helps avoid scratching the cover.
Pros
- 30 clips for broad coverage
- Stainless steel, rust resistant
- Large opening
Cons
- Metal jaws need care on resin rails
- No straps included
The Augisteen 30 PCS Pool Cover Clips Stainless suit buyers who want stainless steel and a large opening without buying a small kit. Each clip is 5.12 inches long, and the maximum opening reaches 3.15 inches.
That size fits most above ground pool edges with a thick cover.
The material is stainless steel, which Augisteen describes as strong, sturdy and rust resistant. The clips are meant to hold the cover in strong wind and bad weather.
The opening rolls inward, which helps avoid scratching the pool cover when you press and clip it on.
The trade-off is that these are metal clips without PVC sleeves. On resin rails, you should check contact points and add clips evenly so one clip does not carry all the load.
The 30 count is helpful for a medium pool, but a very large oval pool may still need more.
Pick these if you want a wide opening and stainless steel at a 30 piece count. Pick the Fabflame kit instead if you want PVC sleeves and storage straps.
Pick a plastic clip set if you prefer no metal contact at all.
Beeplove 48 Pcs Pool Cover Clips: Best for steel wall pools needing many clips
- 48 stainless steel clips
- PVC wrapped opening
- For steel wall above ground pools
- Can clip to cover wire
- Weather resistant
A 48 pack for steel wall pools where you want clips close together. The PVC wrapped opening adds friction to help prevent slipping.
Pros
- 48 clips for even tension
- PVC wrapped opening
- Rust and corrosion resistant steel
Cons
- Smaller clip size than 5 inch models
- Steel wall focus
The Beeplove 48 Pcs Pool Cover Clips suit steel wall above ground pools where you want many clips close together. The 48 count gives you enough pieces to keep spacing tight around the frame.
That even spacing helps prevent gaps where wind can start to lift the edge.
The clips are stainless steel and described as weather resistant, with resistance to rust, corrosion and UV damage. The opening is wrapped with PVC adhesive, which Beeplove says increases friction and helps prevent slipping.
That wrap is a useful middle ground between bare metal and all plastic.
You can also clip these to the pool cover wire for extra fixation, according to Beeplove. That option can help when the rail alone does not give enough grip.
Installation is manual and does not need tools.
The trade-off is size. At 2.2 by 0.9 inches in the listed dimensions, these clips are smaller than the 5 inch models above.
They are best where the steel wall edge is thin and the cover overlap is modest. For thick covers or wide rails, a larger jaw model will fit better.
The Gladon CLJR5012B-04 2-Piece Premium Swimming Pool Cover Clip system suits owners who want a lock instead of a clamp. It is a 48 pack of two-piece clips made of resin.
The male part snaps onto the top rail, and the female part snaps over the cover onto the male part.
That design changes how you use the cover. You install a minimum of three male parts per top rail.
Then you place the cover over the pool and rails. Finally, you snap the female parts over it.
To remove the cover, you pull on the excess cover material to release the female locks.
Gladon says the two-piece design offers more holding power than one-piece clips, reduces top rail abrasion and restricts wind lift. The resin is UV stabilized, and the interlocking parts are 5 inches long in Gladdon's description.
The 6 by 1 inch listed size reflects the assembled clip profile.
The trade-off is steps. A spring clamp is faster to move around the edge.
This system needs planning and a minimum number of male parts per rail. Pick it if you want the cover locked down and rail abrasion reduced.
Pick a clamp if you want fast on and off use.
How many clips do you need for your pool?
You need enough clips to keep spacing even around the full rail. A gap on the windy side can let the cover flap and loosen the clips next to it.
Start by measuring the pool perimeter, then divide by your spacing.
For a round pool, the perimeter is the diameter times 3.14. A 24 foot round pool has a perimeter of about 75 feet.
At 18 inches apart, you need about 50 clips. At 24 inches apart, you need about 38 clips.
Oval and rectangular pools have longer perimeters and corners that need extra clips. Add clips at corners and at the ends of long rails.
Corners catch wind and need tighter spacing than the middle of a straight rail.
What spacing works in wind?
Close spacing works best in exposed yards. Twelve to 18 inches is a good target where wind can lift the cover.
Eighteen to 24 inches can work in sheltered yards with a cable or rope system holding the middle.
Do you need more clips than the kit includes?
Check the count before you buy. A 10 pack is rarely enough for a large winter cover.
A 28 or 30 pack fits many medium pools. A 48 or 60 pack gives you room for close spacing and spare clips.
Which clips fit steel wall, resin and framed pools?
Steel wall pools often have a wide top rail and a cover that overlaps the wall. Clips made for steel wall pools, such as the Beeplove 28 Pcs and Beeplove 48 Pcs models, are made for that edge.
Resin rail pools need care with metal jaws. PVC sleeves, PVC wrapped openings or rolled edges help reduce marks.
The Fabflame kit and Augisteen clips both use rolled edges, and Fabflame adds PVC sleeves.
Framed and inflatable pools are different. Some clips made for permanent above ground pools will not fit a soft sided pool.
Read the fit limits for each clip, and check our guide to best pool cover clips for intex pool if your pool is framed or inflatable.
How do you check jaw opening?
Measure the rail thickness plus the folded cover thickness together. That total is what the jaw must close over.
A 2 inch jaw suits thin stacks. A 3.15 inch or 3.7 inch jaw suits thick winter covers and solar blankets.
Rail clips vs spring clamps vs two-piece locks
Rail clips are made to slide or snap onto the rail and cover edge. They are shaped for pool use and often come in packs of 28 to 60.
The Beeplove 60 Pcs and Beeplove 28 Pcs models are rail clips for permanent above ground pools.
Spring clamps are general purpose clamps with a wide jaw. The EQUIPTZ Spring Clamps 4 inch are an example, with a 2 inch jaw and 20 pound grip.
They work well on thin rails and light covers, but they are not shaped only for pools.
Two-piece locks use a male part on the rail and a female part over the cover. The Gladon system is in this group.
It offers a locked hold and less rail abrasion, but it takes more steps to install and remove.
Which type is best for winter covers?
Rail clips and two-piece locks are best for winter covers because they are made for the rail edge. Spring clamps can work for short term use or extra hold points.
For a full winter, choose a clip made for your pool type.
Which type is easiest for solo setup?
Spring clamps and slide-on rail clips are easiest for one person. You can add clips as you walk around the pool.
Two-piece locks need you to install male parts first, then place the cover, then snap female parts over it. That order takes more planning.
Plastic, stainless steel or resin: which material should you pick?
Plastic clips will not rust and are light to handle. The Beeplove 60 Pcs clips use butadiene plastic, and the Beeplove 28 Pcs clips use polypropylene.
Plastic is a good choice for permanent above ground pools with metal railings.
Stainless steel clips keep spring force across seasons. The Fabflame, Augisteen and Beeplove 48 Pcs models use stainless steel.
Look for PVC sleeves or wrapped openings if you worry about scratches on the rail or cover.
Resin clips reduce rail abrasion because the contact is plastic. The Gladon two-piece system uses UV stabilized resin.
It is a good pick if your top rail shows wear from metal clips.
Does material affect wind hold?
Material affects how long the clip keeps its bite. Plastic can lose grip after sun exposure and temperature changes.
Stainless steel is designed to maintain more consistent clamping pressure across seasons. Resin locks hold by snapping, not by spring pressure alone.
How do you install clips so the cover stays tight?
Start with the cover centered and the overlap even on all sides. Uneven overlap leaves one side short and one side too long.
Tighten the cable or rope system before you add clips, so clips hold a cover that is already in place.
Add clips evenly around the rail. Work in a pattern, such as every third clip, then fill in the gaps.
That pattern keeps tension balanced as you go. Pull the cover edge firm before you close each clip, but do not stretch the cover so tight that it tears at a clip point.
Leave a little slack in the cover between clips. A cover pulled drum tight can sag or tear under snow load.
Clips should stop wind lift, not carry the full weight of snow or water. For more on tension, see how to string a winter pool cover.
What if the cover still flaps in wind?
Add clips on the windy side first. Then check cable or rope tension in the middle.
Clips control the edge, while cables and weights control the center. For extra hold in the center, compare best above ground pool cover weights.
What other cover gear do clips work with?
Clips work best as part of a full cover system. A winter cover needs a cable or rope to hold the middle, plus clips or locks at the edge.
For the full system, start with swimming pool covers and our guide to best pool cover accessories.
If you use a solar blanket in summer, clips can hold the edge on calm days as well. For a heavy duty round cover, see best heavy duty round pool cover.
For general outdoor use, see best pool cover for outdoor pool.
Clips do not heat the water or extend the swim season on their own. If you are planning around shoulder season swimming, our guide to swimming pool heaters covers the heating side of the setup.
Verdict: which above ground pool cover clips should you buy?
Pick the Beeplove 60 Pcs 4.7 inch clips if you have a permanent above ground pool with metal railings and want close spacing. The 60 count is the strongest reason to choose them for the best above ground pool cover clips overall.
Pick the Fabflame kit if your cover is thick or your rail is wide. Its 3.7 inch jaw and PVC sleeves solve a fit problem that narrow clamps cannot.
Pick the Gladon two-piece system if you want a locked hold and less rail abrasion. Pick the EQUIPTZ spring clamps if your rail is thin and you want a general clamp for other yard uses too.
Measure your rail and cover stack first. Then choose the jaw opening and count that fit that measurement.
That order will help you buy clips that stay on all winter.
Our top 3 picks at a glance
-
1
Best for close spacing around large poolsBeeplove 60 Pcs 4.7 Winter Pool Cover
9.7/10 our score
See it on Amazon -
2
-
3
Best for steel wall pools on a budget countBeeplove 28 Pcs Winter Pool Cover Clips
9.5/10 our score
See it on Amazon
Frequently asked questions
How many pool cover clips do I need?
Most round above ground pools need clips spaced 12 to 24 inches apart around the full edge. For a 24 foot round pool, that often means 36 to 60 clips depending on wind exposure.
Oval pools and large pools need more clips.
Count your rail length first, then add spare clips for corners and windy sides.
Do cover clips fit Intex pools?
Some clips fit Intex rails and some do not. Check rail thickness, rail width and jaw opening before you buy, and look for clips made for soft sided or framed pools if yours is inflatable.
Our guide to pool cover clips for Intex pools covers the fit checks that matter most.
Can clips hold a winter cover in high wind alone?
Clips help, but wind hold also depends on cover overlap, cable or strap tension, and cover weights. Clips stop the edge from lifting first, while straps and weights control the middle.
Use clips plus a cable or rope system for exposed yards where wind can get under a loose edge.
Plastic or stainless steel clips, which lasts longer?
Stainless steel clips keep clamping force across seasons and resist rust. High quality plastic clips will not rust and are lighter, but they can lose bite with age and sun exposure.
Choose stainless for permanent winter use and plastic for light duty or temporary covers.
How do I stop clips from scratching my pool rail?
Look for PVC sleeves, PVC wrapped openings or rolled jaw edges. Those features cushion contact between metal and the rail or cover.
Resin two-piece systems also reduce abrasion because the rail contact is plastic on plastic.
About this guide: Our look at best above ground pool cover clips draws on maker specs, materials and what owners report. See how we research.



