6 Best DE Pool Filter Grid Replacement (November 2026)
The best DE pool filter grid replacements include the Unicel FS-2005 60 Sq Ft Vertical DE for broad 60 sq ft compatibility, the Discount Pool Mart DPM Swimming Pool DE Filter for Pentair FNS 60 sq ft filters, and the Discount Pool Mart DPM Swimming Pool DE PUREX for Pentair PUREX 36 sq ft filters.
On this page (6 sections)
- The best DE pool filter grid replacement options
- How we compared these DE pool filter grids
- What should you measure before buying DE pool filter grids?
- Are a DE grid set and a complete assembly the same?
- How do you replace and care for DE pool filter grids?
- Which DE pool filter grid replacement should you choose?
The best DE pool filter grid replacement for most 60 sq ft systems is the Unicel FS-2005. It includes 7 full and 1 partial grid, measures 30 x 11 inches, and has broad stated compatibility across several brands.
A grid is not a generic spare. The cloth, support frame and DE coating work as one system, so a close match helps the filter hold pressure and clear fine debris.
The right choice depends on more than the square foot rating. Grid height, full grid width, partial grid size and assembly layout all affect fit.
Measure the old grid before you order. Note the length and width, count the grids, mark the partial grid, and check the filter model and part number on the tank label.
The fabric helps DE form an even cake. A worn or torn surface can let fine particles pass and make backwashing less effective.
If you need a wider overview first, read our guide to pool pumps and filters. It explains how the filter fits into the larger circulation system, while our guide to what is a DE pool filter covers the role of diatomaceous earth.
Our picks at a glance
-
1
Best for broad 60 sq ft compatibilityUnicel FS-2005 60 Sq Ft Vertical DE
9.7/10 our score
See it on Amazon -
2
Best for Pentair FNS 60 sq ft filtersDiscount Pool Mart DPM Swimming Pool DE Filter
9.5/10 our score
See it on Amazon -
3
Best for Pentair PUREX 36 sq ft filtersDiscount Pool Mart DPM Swimming Pool DE PUREX
9.4/10 our score
See it on Amazon
- 4
Check itMXLTYMX 48 Square Foot Swimmin Pool DE
Best for wide 48 sq ft brand coverage - 5
Check itIn The Swim 48 sq. ft. Complete
Best for woven polypropylene 48 sq ft grids - 6
Check itPentair FNS Plus 60 Sq Ft Filter
Best for a complete Pentair grid assembly
The best DE pool filter grid replacement options
The best DE pool filter grid replacement is the one that matches your filter model and internal assembly. The products below are ordered by score, with the broadest and clearest fit options first.
Unicel FS-2005 60 Sq Ft Vertical DE: Best for broad 60 sq ft compatibility
- 60 sq ft media area
- 7 full and 1 partial grid
- 30 x 11 in dimensions
- Fits several American, Hayward, Pac-Fab, Sta-Rite, Astral, Waterway, Jacuzzi and Jandy systems
A full 60 sq ft set with broad stated compatibility across several pool filter brands. Its 7-full-plus-1-partial configuration suits systems that use this common vertical grid layout.
Pros
- Broad brand compatibility
- Complete 8-grid set
- 30 x 11 in grid size
Cons
- Only fits systems using the matching dimensions and configuration
The Unicel FS-2005 is the strongest general choice for a 60 sq ft vertical DE filter when the old grids measure 30 x 11 inches. The set includes 7 full grids and 1 partial grid, so it follows the configuration used by many systems in this size range.
Unicel states compatibility with systems made by Hayward, Pentair, American Products, Pac-Fab, Sta-Rite, Astral, Waterway Plastics, Jacuzzi and Jandy. That broad brand list makes this a useful starting point, but the filter model and dimensions still need to match.
The grid cloth design is intended to support DE caking and lower resistance to water flow. The grid and DE powder work together to filter debris and impurities down to an average of 2 to 5 microns.
Choose this set when you want broad brand coverage and a complete replacement layout. Confirm that your filter uses the 30 in height and 7-full-plus-1-partial configuration before ordering.
Discount Pool Mart DPM Swimming Pool DE Filter: Best for Pentair FNS 60 sq ft filters
- 60 sq ft filter area
- 7 large and 1 partial grid
- 30 in height
- Reinforced core and chemical-resistant synthetic media
This set targets Pentair FNS 60 systems and several matching part numbers. The 30 in large grids and 30 in partial grid height make model and dimension checks essential.
Pros
- Pentair FNS-focused fit
- Reinforced core
- Chemical-resistant synthetic media
Cons
- Narrower compatibility target than broad universal sets
The DPM Swimming Pool DE Filter Replacement Grid is best for a Pentair FNS 60 system that uses 30 in grids. It contains 7 large grids and 1 partial grid, with the large grids measuring 30 in high and 11 in wide.
The set names PG-1905, FG-1005, 59003000, 59002900, FC-9350 and FC-9450 as matching references. Those references are useful when the filter label or old packaging gives you a part number.
Its reinforced core is designed for structural stability, while the synthetic media is described as chemical resistant. Pleat support bands help hold the pleats in place and reduce pleat flutter.
This is a focused pick rather than a broad universal option. Choose it when your Pentair FNS model and part numbers match, and do not use the 60 sq ft rating alone as proof of fit.
The partial grid is listed at 30 in high and 9 3/4 in wide. That narrower width is part of the layout, so it should not be swapped for a full grid.
Check the old set before ordering, including grid count and the position of the partial element. A photo of the assembly before removal makes reassembly easier.
Use this set for a Pentair FNS 60 filter with matching references. If your filter uses the PUREX layout or a 48 sq ft grid size, this is not the right replacement.
Discount Pool Mart DPM Swimming Pool DE PUREX: Best for Pentair PUREX 36 sq ft filters
- 36 sq ft filter area
- 8 large upside-down grids
- 19 3/8 in height
- Reinforced core and chemical-resistant pleated elements
The 36 sq ft set is built around Pentair PUREX and SMBW configurations. Its 8-grid upside-down layout differs from the 7-full-plus-1-partial pattern used by several larger systems.
Pros
- Clear 36 sq ft target
- 8-grid configuration
- Reinforced core
Cons
- Not a substitute for 48 or 60 sq ft grid layouts
The DPM Swimming Pool DE PUREX set is the right shape of solution for a 36 sq ft Pentair PUREX or SMBW filter. It contains 8 large upside-down grids, each designed around the 36 sq ft configuration.
The stated grid dimensions are 19 3/8 inches high and 10 3/4 inches wide. The set names FG-1236, 07-4923 and FC-9230 as replacement references, along with Pentair PUREX filter models 2036 and 4036.
The reinforced core supports the grid structure, while the pleated elements use synthetic, chemical resistant media. Support bands help reduce pleat flutter and keep the pleat shape steady during operation.
Choose this set when your old assembly uses 8 grids and the 36 sq ft PUREX layout. It is not a substitute for the longer 48 or 60 sq ft sets in this roundup.
The upside-down design is the key difference here. It changes how the grids are arranged, so a set built for a vertical 48 or 60 sq ft filter will not adapt to this layout.
Made in the USA is part of the product information for this set. That detail may matter to some buyers, but fit and grid count still come first.
Before ordering, confirm the filter model and the old grid height. A short grid from a 36 sq ft system should not be confused with the taller grids used in larger filters.
This set suits owners whose Pentair PUREX or SMBW filter already uses the 8-grid arrangement. If your assembly uses 7 full grids and 1 partial grid, look for that layout instead.
MXLTYMX 48 Square Foot Swimmin Pool DE: Best for wide 48 sq ft brand coverage
- 48 sq ft filter area
- 7 full and 1 partial grid
- 24 x 11 in full grids
- Fits several Hayward, Jandy, Pentair, Waterway, American, Pac-Fab, Astral and Jacuzzi models
This 48 sq ft set covers many named DE filter families and uses the familiar 7-full-plus-1-partial arrangement. It is a strong match when your old grids measure 24 inches long.
Pros
- Broad 48 sq ft compatibility
- Complete 8-grid set
- 24 x 11 in full grids
Cons
- Partial grid dimensions must match your existing assembly
The MXLTYMX set is a strong choice for a 48 sq ft filter with 24 in grids. It includes 7 full DE grids measuring 24 x 11 inches and 1 partial grid measuring 24 x 9 3/4 inches.
The named replacements include PFS2448, Unicel FS-2004 and Filbur FC-9540. Compatibility also covers many 48 sq ft models from Hayward, Jandy, Pentair, Waterway, American, Pac-Fab, Astral and Jacuzzi.
This broad list helps when your filter brand varies from the original grid brand. Still, full-grid length and partial-grid width matter more than the brand name alone.
The set is intended to be easy to install and clean, with Micro Glass-Fibre materials identified in the product information. Choose it when your filter uses the 7-full-plus-1-partial 48 sq ft layout.
The 24 in length separates these 48 sq ft options from the 30 in grids used by the 60 sq ft sets. During set-up, lay the grids out in order before you fit them to confirm the count.
This set is a good match when your model references line up and your old grids measure 24 in. If your filter uses 30 in grids, choosing by brand alone will lead to the wrong size.
In The Swim 48 sq. ft. Complete: Best for woven polypropylene 48 sq ft grids
- 48 sq ft media area
- 7 full and 1 partial grid
- 24 x 11 in dimensions
- Woven polypropylene construction
This complete 48 sq ft set uses woven polypropylene and follows the 7-full-plus-1-partial layout. It fits several American, Astral, Hayward, Jandy, Pac-Fab, Pentair and Waterway systems.
Pros
- Complete 48 sq ft set
- Woven polypropylene material
- Named compatibility with several brands
Cons
- Confirm the exact filter model before ordering
The In The Swim Complete DE Pool Filter Grid Set suits a 48 sq ft system that uses woven polypropylene grids. It contains 7 full grids and 1 partial grid, with the full grids given as 24 inches long by 11 inches in outer diameter.
The set names compatibility with American, Astral, Hayward, Jandy, Pac-Fab, Pentair and Waterway DE pool filters. It also replaces Pleatco PFS2448, Unicel FS-2004 and Filbur FC-9540.
Woven polypropylene resins provide the stated material base for the grids. The product information also describes controlled fabric permeability, dirt-holding ability and a lower pressure drop compared with alternative options.
Choose this set when those dimensions and the 48 sq ft rating match your filter. For the replacement process itself, see our guide to DE pool filter cartridge replacement.
Material is one reason to consider this set, but it is not the only one. The 24 in length, 11 in outer diameter and 7-full-plus-1-partial count still need to match your assembly.
For daily use, controlled permeability is meant to help the DE coat evenly. An even coat can support clearer water and more consistent flow through the filter.
The partial grid should be kept in its original position. Placing it in the wrong slot can change how the set seats and can leave a gap in the filtration surface.
This option suits a 48 sq ft filter with matching model references. If your system uses 30 in grids or a complete assembly format, this set will not be the correct choice.
Pentair FNS Plus 60 Sq Ft Filter: Best for a complete Pentair grid assembly
- 60 sq ft FNS Plus design
- Complete element grid assembly
- 34.5 in height
- Pentair part number 59023300
This is a complete assembly for Pentair 60 sq ft FNS Plus DE filters rather than a loose replacement-grid set. Its 34.5 in height and 59023300 part number help separate it from 30 in grid sets.
Pros
- Complete assembly
- Pentair FNS Plus fit
- Clear manufacturer part number
Cons
- Different format from individual 7-full-plus-1-partial grid sets
The Pentair FNS Plus 60 Sq Ft Filter is best for buyers who need a complete element grid assembly for a Pentair FNS Plus filter. It uses Pentair part number 59023300 and catalog part number 4657-34B.
This format differs from the other products here. Instead of a loose set described as 7 full and 1 partial grid, it is one complete assembly with stated dimensions of 18 x 18 x 34.5 inches.
The assembly is designed for Pentair 60 sq ft FNS Plus pool and spa DE filters. Its plastic material and white color are identified in the product information.
Choose this option when your filter calls for the complete 59023300 assembly. If you only need individual grids, compare the 30 in sets above instead.
That distinction is important at set-up. A complete assembly is handled as one unit, while a grid set is fitted grid by grid onto the existing structure.
The 34.5 in height also separates this option from the 30 in grid sets. Even though both are tied to 60 sq ft Pentair systems, the measurements point to different replacement formats.
Check the part number on the filter or old assembly before ordering. The 59023300 reference is the clearest way to confirm that this complete assembly is intended for your model.
This choice suits an owner who needs the whole element structure replaced. If only individual grids are worn, a loose grid set may be the better match once the dimensions align.
How we compared these DE pool filter grids
We compared the products by filter area, grid dimensions, assembly layout, stated model references and material details. The score weighs specs, features and buyer feedback against what you're shopping for.
The most important match is the filter's square-foot rating. The products here cover 36, 48 and 60 sq ft systems, but those numbers are not interchangeable.
Grid height comes next. Several 60 sq ft options use 30 in grids, while the 48 sq ft options use 24 in grids.
The PUREX option uses a shorter 19 3/8 in grid height, and the Pentair complete assembly is 34.5 inches high.
The internal layout also matters. Many sets use 7 full and 1 partial grid, while the PUREX set uses 8 large upside-down grids.
The Pentair option is a complete element grid assembly, so it should be compared by assembly type rather than loose-grid count.
What should you measure before buying DE pool filter grids?
Measure the old grids and record the filter model before choosing a replacement. Check the full-grid length, width, partial-grid width, total count and the position of the partial grid.
A 48 sq ft set commonly uses shorter grids than a 60 sq ft set in this group. Even when two sets share the same brand compatibility, a different height or partial-grid width can prevent a proper fit.
Look for the filter model on the tank label or clamp area. Part numbers such as FS-2004, FS-2005, 59023300, FG-1236 and FC-9540 can narrow the match.
If the old grids are available, photograph the support arrangement before removing them. Keep track of which grid is partial and how the assembly sits on the center pipe or manifold.
Measure each full grid from end to end, and measure the partial grid separately. A small width difference can matter when the assembly has to close cleanly inside the tank.
Also note whether your filter uses loose grids or a complete assembly. That format changes what you should order, even when the square-foot rating looks similar.
Check for wear while you measure. Torn fabric, cracked supports or bent frames can explain poor filtration and can help you decide whether a full set is needed.
Write down the model, measurements and grid count before you shop. Those notes make it easier to compare options and avoid relying on a shared brand name or a single square-foot number.
Are a DE grid set and a complete assembly the same?
A DE grid set replaces the individual filter elements, while a complete assembly includes the assembled element structure. The correct choice depends on how your filter is built and what needs replacement.
The Unicel, DPM, MXLTYMX and In The Swim options are described as grid sets. Most use either 7 full and 1 partial grid or 8 grids in a defined layout.
The Pentair FNS Plus option is a complete element grid assembly. Its 59023300 part number and 34.5 in height make it a different replacement path from a loose 30 in grid set.
Use the same type of replacement that your filter requires. For related components, compare our guide to the best DE pool filter parts.
The difference is practical during installation. A grid set is fitted one element at a time, so the order and the partial-grid position need attention.
A complete assembly is treated as a single unit. It is not interchangeable with a loose-grid arrangement just because both serve a 60 sq ft filter.
Look at the old filter before you decide. If the structure can accept individual grids, a set may be enough.
If the assembly itself is the specified replacement part, use that format.
Care also differs by format. Loose grids can be rinsed and inspected one by one, while a complete assembly should be checked as a whole.
The square-foot rating alone will not settle the question. Grid height, grid count, partial-grid width and assembly type all need to line up with your model.
How do you replace and care for DE pool filter grids?
Replace DE pool filter grids with the pump off, the filter pressure released and the old assembly removed according to the filter instructions. Rinse the replacement grids, inspect the fabric and support structure, then reinstall the assembly in its original order.
Keep the partial grid in the correct position. A narrow grid is part of the assembly design, so placing it incorrectly can change how the set seats inside the tank.
After cleaning, check for torn fabric, broken supports or loose pleat bands. A grid that looks clean but has a damaged surface may allow DE powder to pass through instead of holding it on the filter surface.
Add the correct DE amount for your filter after reassembly. Follow the filter manufacturer's instructions for startup, pressure checks and backwashing intervals.
A robotic cleaner does not remove the need for a working pool filter. Our explanation of how a robotic pool cleaner filters water covers the difference, and this guide explains why an automatic cleaner does not replace the pool filter.
Which DE pool filter grid replacement should you choose?
Choose the Unicel FS-2005 for broad 60 sq ft compatibility and a 30 in, 7-full-plus-1-partial layout. Choose the DPM 60 sq ft set when your Pentair FNS references match, or the DPM PUREX set for a 36 sq ft, 8-grid configuration.
For 48 sq ft systems, choose MXLTYMX for its broad named model coverage or In The Swim for its woven polypropylene construction. Choose the Pentair 59023300 when you need a complete FNS Plus assembly rather than individual replacement grids.
Start with the filter model, not with a preferred brand. The model will point you to the right square foot rating, grid height and assembly layout.
Then measure the old grids. A 24 in grid and a 30 in grid may both be DE grids, but they belong to different filter sizes and will not swap.
Check the partial grid as well. Its width and position are part of the design, so a set with the wrong partial grid can still be the wrong set.
If your old grids are worn across the whole assembly, a complete matched set is easier to fit and maintain. If only one grid is damaged, confirm that a single replacement will match the rest.
For Pentair FNS owners, a matching part number is a strong signal. For owners with mixed brands, the named model references and dimensions matter more than the label on the box.
If your filter uses a different media type, compare our guide to the best pool filter sand before changing the filtration setup. The best choice is the one that matches your measurements and model.
Our top 3 picks at a glance
-
1
Best for broad 60 sq ft compatibilityUnicel FS-2005 60 Sq Ft Vertical DE
9.7/10 our score
See it on Amazon -
2
Best for Pentair FNS 60 sq ft filtersDiscount Pool Mart DPM Swimming Pool DE Filter
9.5/10 our score
See it on Amazon -
3
Best for Pentair PUREX 36 sq ft filtersDiscount Pool Mart DPM Swimming Pool DE PUREX
9.4/10 our score
See it on Amazon
Frequently asked questions
How do I choose a DE pool filter grid replacement?
Match the filter's square-foot rating, grid height, width, partial-grid size and assembly layout. A 48 sq ft filter may use 7 full grids and 1 partial grid, while another system may use 8 grids or a complete assembly.
Check the filter model and old grid dimensions before ordering.
What does 7 full and 1 partial grid mean?
It means the replacement set contains 8 grids total: 7 grids with the standard full width and 1 narrower grid used to complete the internal assembly. The partial grid must match the original opening and support structure.
Do not replace this layout with 8 full grids unless the filter is designed for that configuration.
Are 48 sq ft and 60 sq ft DE grids interchangeable?
No. A 48 sq ft set and a 60 sq ft set have different media areas and usually different grid lengths.
The 48 sq ft products here use 24 in full grids, while several 60 sq ft options use 30 in grids.
Match the filter rating and dimensions first.
Can I replace only one DE filter grid?
You can replace one grid only when the replacement matches the existing assembly and the other grids are still suitable. A damaged or poorly matched grid can affect how DE coats the element set.
For widespread wear, a complete matched set is usually easier to fit and maintain.
How should I care for replacement DE filter grids?
Shut off the pump, release filter pressure and remove the grid assembly according to your filter instructions. Rinse the grids with clean water, inspect the fabric and core, and reinstall them in the correct order before adding the required DE.
Avoid forcing a grid into the wrong support position.
About this guide: Our look at DE pool filter grid replacements draws on maker specs, materials and what owners report. See how we research.


