Guide

How to Replace DE Pool Filter Cartridges

Updated on · By the Pool Care Pilot team

Replace DE filter elements only with parts made for your filter model. Cartridge style DE elements are not the same as grids or fingers, so identify the element type and model before ordering.

On this page (10 sections)
  1. What does DE pool filter cartridge replacement mean?
  2. How do you identify the element style?
  3. What should you do before opening a DE filter?
  4. How do you replace cartridge style DE elements?
  5. How do you recharge DE after replacing elements?
  6. How do you choose a replacement DE grid set?
  7. What if your filter uses DE fingers?
  8. Is a standard pool cartridge filter the same as a DE filter?
  9. What should you check after replacement?
  10. How do you make the right replacement choice?

Replace DE pool filter elements with parts made for your exact filter model, and first confirm whether it uses cartridge style elements, grids, or fingers. These styles aren't interchangeable, so check the model label and manual before ordering or opening the filter.

DE, or diatomaceous earth, coats the filter media and captures fine debris as water passes through. If you want a refresher on what a DE pool filter is, start there before choosing parts.

What does DE pool filter cartridge replacement mean?

DE pool filter cartridge replacement means changing cartridge style DE elements made for a specific filter. It doesn't mean replacing a standard pleated cartridge or a grid set unless the filter's design calls for that part.

Filter terms can be confusing. Some DE filters use fabric covered grids, while others use cartridge style elements or finger shaped elements.

These internal parts perform a similar filtering job, but their shapes, mounts, and seals differ.

Your filter's model number is the best starting point. Find it on the tank label, then check the owner's manual for the part type and replacement instructions.

The filter is one part of a larger circulation system. Our guide to pool pumps and filters explains how the pump, filter, and plumbing work together.

How do you identify the element style?

Open the manual or check the existing element shape before buying replacement parts. A product name that includes “DE” doesn't by itself confirm that it fits your filter.

Look for the model number and element description in the manual. If those aren't available, note the filter's brand, model, element count, and the shape of each element, then confirm the replacement with the filter manufacturer.

  • Grids are broad, flat panels, often arranged as a set inside the tank.
  • Cartridge style elements are pleated cylinders or other cartridge shapes specified for a particular DE filter.
  • Fingers are narrow, elongated elements that fit filters designed around that style.

Don't use dimensions alone to decide fit. A part also needs the correct connection points and sealing surfaces.

Can you use DE grids instead of cartridges?

No, not unless your filter is designed for those grids. Grid sets such as the best DE pool filter parts are for compatible grid style filters.

The Unicel FS-2005 is a set of 7 full grids and 1 partial grid, each designed for compatible filter systems. It is not a universal cartridge style replacement.

Check your filter model against the compatibility information before ordering. Don't try to adapt grids to a cartridge style filter.

What should you do before opening a DE filter?

Turn off the pump and fully relieve filter pressure before opening the tank. A pressurized filter can be dangerous, so follow the filter manual's shutdown and air relief steps exactly.

Switch off the pump at its control and power source as instructed. Close any valves the manual identifies, then use the pressure relief valve to release pressure and wait until the gauge reads zero.

Never loosen a clamp, lid, or tank band while the gauge shows pressure. If the gauge is stuck or you can't confirm that pressure is relieved, stop and get help from a qualified pool professional.

Keep the replacement part, cleaning supplies, and a container for removed DE nearby. This helps limit spills while the filter is open.

How do you replace cartridge style DE elements?

Use the filter maker's sequence for removing and installing its elements. The exact housing, clamps, seals, and connections vary by model.

  1. Shut down the pump and release all filter pressure.
  2. Open the housing according to the manual.
  3. Note how the element assembly sits before removing it.
  4. Lift out the old elements without forcing connections.
  5. Clean loose DE from the housing and inspect parts you can see.
  6. Install the compatible replacement elements and check that they sit evenly.
  7. Refit the housing and secure its clamp or lid as instructed.
  8. Restart and vent air from the filter as the manual directs.

Inspect the tank's sealing surfaces and any accessible O-rings. Replace damaged seals with the correct parts rather than trying to compensate by tightening the housing harder.

If an element won't seat or a connection doesn't match, don't force it. Recheck the model and part number before continuing.

How do you recharge DE after replacing elements?

Follow the filter manual for the amount and method of adding DE powder. A new set of elements still needs the DE coating specified for that filter.

Use the approved DE product and the dose given for your model. Add it through the skimmer or another point only if the manual directs you to do so, and keep the pump running as instructed.

Too little or too much DE can affect filtration and flow. Don't guess based on another filter's size or on the amount used before a different element set was installed.

Keep DE dust out of your face and avoid breathing it. Follow the product label and local disposal guidance for wet DE and cleaning waste.

How do you choose a replacement DE grid set?

Choose a grid set only when your filter uses grids and the model is listed as compatible. Compare the set contents, dimensions, and supported filter families with your manual.

The Discount Pool Mart DPM set includes 7 large grids and 1 partial grid for compatible Pentair FNS 60 filters. Its stated large grid dimensions are 30 in high by 11 in wide.

This option is useful for a filter that needs the matching full grid arrangement. It won't replace cartridge style DE elements or another filter's grid pattern.

For a grid specific comparison, see best replacement DE pool filter grids. Confirm the exact filter model and element layout before choosing a set.

What if your filter uses DE fingers?

Buy fingers only for a filter designed to hold finger style elements. Fingers have a different shape and attachment than grids or cartridge style elements.

If your filter has narrow finger elements, use the model number to locate the correct replacement set. Our guide to best replacement DE pool filter fingers focuses on that style.

Don't decide based on the word “cartridge” alone. Some product names use the word broadly, so verify the actual part shape and intended filter compatibility.

Is a standard pool cartridge filter the same as a DE filter?

No. A standard cartridge filter uses its own cartridge media, while a DE filter uses the element type specified for its DE design and is charged with DE powder.

The filter type matters when buying parts.

The XtremepowerUS 425 Sq. Ft.

Swimming Pool Cartridge is a separate cartridge filter system with 4 filter cartridges. It is not a replacement element for a DE filter.

If you're choosing a new filtration type, compare sand vs cartridge pool filters alongside the maintenance needs of DE systems. An automatic cleaner also serves a different role from the filter, as explained in why an automatic cleaner doesn't replace the pool filter.

What should you check after replacement?

Check for leaks, unusual pressure, and correct water flow after restarting the system. Follow the manual's air venting and startup steps, and stop the pump if anything appears wrong.

Watch the filter housing and connections while the pump runs. If you see a leak, hear unusual sounds, or notice poor flow, shut down and release pressure before inspecting anything.

A robotic cleaner filters water in its own way, but it doesn't change what element belongs in the main DE filter. See how a robotic pool cleaner filters water for that distinction.

How do you make the right replacement choice?

For DE pool filter cartridge replacement, match the element style and model first, then follow the filter maker's installation and DE charging steps. Choose a grid set only for a compatible grid filter, and choose finger elements only for a finger style filter.

If you need grids, compare the Unicel set with the DPM set using the filter model and required layout. If your system uses cartridge style DE elements, source the matching element by model rather than substituting a standard cartridge filter.

Keep the manual with your maintenance supplies. It gives the safest sequence for depressurizing, opening, recharging, and restarting your specific filter.

Frequently asked questions

Are DE pool filter cartridges the same as grids?

No. Cartridge style DE elements and DE grids are different shapes and need parts designed for the filter model.

Check the manual, model number, and existing element style before buying, and don't assume a grid set will fit a filter that uses cartridge elements.

How do you replace DE pool filter cartridges?

Shut off and isolate the pump, relieve all filter pressure, then open the housing as directed by its manual. Remove the old elements, clean and inspect the housing and seals, install the correct replacement, close the filter, and restart according to the manufacturer's instructions.

How often should DE filter elements be replaced?

There isn't one replacement interval for every DE filter. Inspect the elements when cleaning and replace them if the media is torn, the structure is damaged, or cleaning no longer restores normal operation; use the filter maker's guidance for your model.

Can cartridge filter elements be used in a DE filter?

Only use elements specified for the exact filter model. A standard cartridge filter element and a DE element may look similar, but their shape and role can differ; confirm compatibility in the manual or with the filter manufacturer before installation.