Best picks

8 Best Polaris 280 Replacement Hose (November 2026)

Updated on · By the Pool Care Pilot team

The best Polaris 280 replacement hoses and feed hose assemblies include the Polaris Genuine Parts G5 Feed Hose for a complete genuine assembly, the MAKHOON D20 Hose Swivel with D15 Nut for swivel and nut repairs, and the ATIE Pool Cleaner Feed Pipe K30 for a cracked feed pipe.

On this page (7 sections)
  1. How we chose Polaris 280 replacement hoses
  2. Polaris 280 hose options compared
  3. Best replacement hoses for Polaris 280 cleaners
  4. Which Polaris 280 hose part should you replace?
  5. How do you check Polaris 280 hose compatibility?
  6. How do feed hoses differ from pool backwash hoses?
  7. Which Polaris 280 replacement hose is right for you?

The best Polaris 280 replacement hose for a full system refresh is the Polaris Genuine Parts G5 Feed Hose, a 31 ft pre-assembled kit with a UWF connector. For a smaller repair, match the damaged part: choose a D45 section, D20 swivel and D15 nut, B5 sweep hose or K30 feed pipe.

A pressure-side cleaner uses several connected parts, and the word “hose” can refer to more than one of them. Confirm whether the leak or wear is along the feed line, at a swivel, in the cleaner's sweep hose or at the feed pipe before ordering.

For context on the cleaner category, see our guide to best pressure side pool cleaners and how automatic pool cleaners work.

Our picks at a glance

  1. 1 Polaris Genuine Parts G5 Feed Hose
    Best for a complete genuine assembly

    Polaris Genuine Parts G5 Feed Hose

    9.7/10 our score

    See it on Amazon
  2. 2 MAKHOON D20 Hose Swivel with D15 Nut
    Best for swivel and nut repairs

    MAKHOON D20 Hose Swivel with D15 Nut

    9.6/10 our score

    See it on Amazon
  3. 3 ATIE Pool Cleaner Feed Pipe K30
    Best for a cracked feed pipe

    ATIE Pool Cleaner Feed Pipe K30

    9.4/10 our score

    See it on Amazon
  1. 4Funmit B5 Sweep Hose Replacement for ZodiacCheck it
  2. 5Hypolinx Tangle-Resistant D45 Feed Hose ReplacementCheck it
  3. 6MAKHOON Pool Cleaner Feed Hose Replacement

    MAKHOON Pool Cleaner Feed Hose Replacement

    Best for an all-in-one aftermarket kit
    Check it
  4. 7Amptyhub G6 Pool Cleaner Feed Hose Replacement

    Amptyhub G6 Pool Cleaner Feed Hose Replacement

    Best for a black complete assembly
    Check it
  5. 8Hypolinx Polaris Compatible Pool Cleaner Hose ReplacementCheck it

How we chose Polaris 280 replacement hoses

The best Polaris 280 replacement hose depends on whether you need a complete assembly or one component. We compared the stated model fit, included pieces and the kind of repair each option addresses.

We prioritized clear 280 compatibility and useful kit contents. A complete assembly ranks highest for a broad replacement, while individual components remain useful when the rest of the hose system is in good condition.

Scores weigh stated specs, features and buyer feedback against what you're shopping for. We also checked where compatibility is limited, including repeated warnings that several parts do not fit the Polaris 360.

Polaris 280 hose options compared

The G5 is the most complete genuine replacement here, while the other picks cover part-specific repairs and alternate assemblies. Compare length and included fittings with the hose currently on your cleaner.

ProductBest forCompatibilityAssembly lengthIncludedOur score
Polaris Genuine Parts G5 Feed Hosea complete genuine assemblyPolaris 280, 280 Tank Trax, TR28P, 380 and 18031 ftUWF, 8 nuts, 3 swivels, 8 floats, hose sections9.7
MAKHOON D20 Hose Swivel with D15 Nutswivel and nut repairs9.6
ATIE Pool Cleaner Feed Pipe K30a cracked feed pipe1 K30 feed pipe and 1 B20 screw9.4
Funmit B5 Sweep Hose Replacement for Zodiaca worn sweep hoseB5 hose, tail scrubber, 7 wear rings9.2
Hypolinx Tangle-Resistant D45 Feed Hose Replacementa single D45 section8.9
MAKHOON Pool Cleaner Feed Hose Replacementan all-in-one aftermarket kit32.8 ftUWF, back-up valve, in-line filter, nuts, swivels and floats8.7
Amptyhub G6 Pool Cleaner Feed Hose Replacementa black complete assembly32.8 ftUWF, back-up valve and in-line filter8.4
Hypolinx Polaris Compatible Pool Cleaner Hose Replacementa longer replacement run8.2

Best replacement hoses for Polaris 280 cleaners

The Polaris Genuine Parts G5 is the leading choice for replacing a full feed assembly, while the MAKHOON swivel and nut set is better for smaller connection repairs. These options are ranked by score, with each badge pointing to a distinct use.

1

Polaris Genuine Parts G5 Feed Hose: Best for a complete genuine assembly

Polaris Genuine Parts G5 Feed Hose, Polaris 280 replacement hoses and feed hose assemblies
9.7/10Our score
  • Fits Polaris 280
  • 31 ft complete hose assembly
  • Includes UWF connector, nuts, swivels and floats
  • 90-day limited manufacturer warranty

A pre-assembled genuine Polaris hose kit for replacing the full feed assembly. The in-line filter and back-up valve must transfer from the old hose.

See it on Amazon

Pros

  • Exact factory replacement kit
  • UWF connector included
  • Pre-assembled

Cons

  • In-line filter and back-up valve not included

The Polaris Genuine Parts G5 is the clearest fit when the existing feed assembly is worn across multiple sections. It includes 31 ft of assembled hose, a UWF connector assembly, 8 feed hose nuts, 3 swivels and 8 floats.

Its stated compatibility includes Polaris 280, 280 Tank Trax, TR28P, 380 and 180 cleaners. Polaris also names several other models, including the 3900 Sport and 280 Black Max.

The in-line filter and back-up valve are not included, so transfer those parts from the old assembly if they remain usable. The kit comes pre-assembled and installation ready, and Polaris states a 90-day limited manufacturer warranty.

Choose it for a full genuine replacement where the existing filter and back-up valve can be reused. If you only have a worn swivel or nut, a smaller parts pack may be a more targeted repair.

Polaris Genuine Parts G5 Feed HoseCheck it on Amazon
2

MAKHOON D20 Hose Swivel with D15 Nut: Best for swivel and nut repairs

MAKHOON D20 Hose Swivel with D15 Nut, Polaris 280 replacement hoses and feed hose assemblies
9.6/10Our score
  • 3 D20 swivels
  • 6 D15 nuts
  • Fits Polaris 280
  • Not compatible with Polaris 360

A parts pack for replacing worn D20 swivels and D15 feed hose nuts without buying a complete hose assembly.

See it on Amazon

Pros

  • Includes both swivels and nuts
  • Names Polaris 280 compatibility

Cons

  • Not a hose assembly
  • Not compatible with Polaris 360

The MAKHOON D20 and D15 pack addresses worn hose swivels and nuts, rather than a damaged length of hose. It includes 3 D20 swivels and 6 D15 feed hose nuts.

The stated compatibility covers Polaris 180, 280, 380 and several related models, including the Vac-Sweep 280. That broad fit list makes it useful when the connection parts have become the problem but the hose itself is still serviceable.

MAKHOON specifically says these parts do not work with the Polaris 360. Check the type of nut and swivel on your current hose before replacing them, since this package does not include feed hose sections.

Choose this pack for a parts-level repair at multiple hose joints. For a cracked hose tube, select a compatible hose section or complete assembly instead.

MAKHOON D20 Hose Swivel with D15 NutCheck it on Amazon
3

ATIE Pool Cleaner Feed Pipe K30: Best for a cracked feed pipe

ATIE Pool Cleaner Feed Pipe K30, Polaris 280 replacement hoses and feed hose assemblies
9.4/10Our score
  • K30 feed pipe
  • B20 sweep hose adjust screw
  • For Polaris 280 and 280 TankTrax

This cleaner-side hub part routes high-pressure water to the sweep hose, water management system and turbine drive shaft.

See it on Amazon

Pros

  • Includes the B20 adjustment screw
  • Specific fit for 280 models

Cons

  • Not a feed hose assembly

The ATIE K30 is a feed pipe for the Polaris 280 cleaner body, not a replacement for the long hose from the wall fitting. It includes a B20 sweep hose adjustment screw.

The K30 receives high-pressure water from the return line through the booster pump and feed hose. It then routes water to the sweep hose, water management system and turbine drive shaft assembly.

ATIE says to check the feed pipe every 2 to 3 pool seasons and replace it if it has a leak or crack. Its stated compatibility includes the Vac-Sweep 280 and 280 TankTrax.

Choose this part when the cleaner-side feed pipe is cracked or leaking. If the damaged section runs between the wall and cleaner, look at a D45 feed hose or full assembly.

ATIE Pool Cleaner Feed Pipe K30Check it on Amazon
4

Funmit B5 Sweep Hose Replacement for Zodiac: Best for a worn sweep hose

Funmit B5 Sweep Hose Replacement for Zodiac, Polaris 280 replacement hoses and feed hose assemblies
9.2/10Our score
  • B5 sweep hose
  • 42 in long
  • Includes tail scrubber and 7 wear rings
  • Not compatible with Polaris 360

A replacement for the short sweep hose that scrubs pool surfaces, with a tail scrubber and wear rings in the kit.

See it on Amazon

Pros

  • Includes wear rings and tail scrubber
  • Fits Polaris 280

Cons

  • Aftermarket part
  • Not compatible with Polaris 360

The Funmit B5 is for replacing the short sweep hose on a Polaris 280, not the feed hose that supplies water to the cleaner. The 42 in kit includes a tail scrubber and 7 blue wear rings.

The stated compatibility includes Polaris 180, 280, 380 and 480 models. Funmit says the hose can scrub the pool floor, walls, corners and steps, where the sweep hose moves during cleaner operation.

This is an aftermarket part, and Funmit explicitly excludes the Polaris 360. Check the wear rings and tail scrubber in your current setup to confirm that this kit covers the parts you intend to replace.

Choose it when the sweep hose is worn but the feed line is sound. For other worn Polaris components, see our guide to best Polaris 280 parts.

Funmit B5 Sweep Hose Replacement for ZodiacCheck it on Amazon
5

Hypolinx Tangle-Resistant D45 Feed Hose Replacement: Best for a single D45 section

Hypolinx Tangle-Resistant D45 Feed Hose Replacement, Polaris 280 replacement hoses and feed hose assemblies
8.9/10Our score
  • 10 ft D45 feed hose
  • PVC and rubber blend
  • For Polaris 280, 380 and 180
  • Not compatible with Polaris 360

A single 10 ft D45 hose section for a repair that does not call for a complete feed assembly. Hypolinx describes it as tangle resistant.

See it on Amazon

Pros

  • 10 ft section
  • Flexible PVC and rubber blend

Cons

  • Does not replace the full assembly

The Hypolinx D45 is a single 10 ft feed hose section for a targeted replacement. It's made from a hybrid PVC and rubber blend and is described by Hypolinx as tangle resistant.

The stated fit includes Polaris 280, 380 and 180, as well as additional related models. It is not compatible with Polaris 360.

Since this is one D45 hose, check the number of worn sections and the length needed before ordering.

Hypolinx describes the hose as having a flexible, rubber-enhanced formulation intended to resist kinks and coil memory. These are the brand's stated design claims, so your pool layout and hose condition still matter when choosing a replacement.

Choose this for one damaged section when the rest of the assembly remains usable. A complete kit may suit you better if several lengths, floats and fittings also need attention.

Hypolinx Tangle-Resistant D45 Feed Hose ReplacementCheck it on Amazon
6

MAKHOON Pool Cleaner Feed Hose Replacement: Best for an all-in-one aftermarket kit

MAKHOON Pool Cleaner Feed Hose Replacement, Polaris 280 replacement hoses and feed hose assemblies
8.7/10Our score
  • Complete assembly with UWF
  • Includes back-up valve and in-line filter
  • 32.8 ft total hose
  • Not compatible with Polaris 360

A complete aftermarket assembly that includes a UWF, back-up valve and in-line filter, making it a fit for replacing more than the hose alone.

See it on Amazon

Pros

  • Includes back-up valve and in-line filter
  • 32.8 ft assembly

Cons

  • Not compatible with Polaris 360

The MAKHOON complete hose replacement includes more inline parts than the Polaris G5 kit. It lists a UWF connector, back-up valve, in-line filter, nuts, swivels and floats, along with 32.8 ft of hose assembly.

Its stated cleaner compatibility includes Polaris 280, 380, 180 and 3900 Sport. The product description also names several other cleaner models, while warning that it does not fit Polaris 360.

This kit can suit a broad replacement when you want the backup valve and filter included rather than transferring them from the old hose. Review the listed hose section lengths and connection layout against your current assembly before buying.

Choose it when multiple pieces need replacement and you want the listed parts together. If you prefer a genuine Polaris kit and can reuse the filter and valve, compare it with the G5 above.

MAKHOON Pool Cleaner Feed Hose ReplacementCheck it on Amazon
7

Amptyhub G6 Pool Cleaner Feed Hose Replacement: Best for a black complete assembly

Amptyhub G6 Pool Cleaner Feed Hose Replacement, Polaris 280 replacement hoses and feed hose assemblies
8.4/10Our score
  • G6 complete hose assembly
  • 32.8 ft total
  • Includes UWF, back-up valve and in-line filter
  • Not compatible with Polaris 360

A black G6-style complete assembly for Black Max 280 and 380 cleaners, with the UWF and two key inline parts included.

See it on Amazon

Pros

  • Includes back-up valve and in-line filter
  • 32.8 ft total length

Cons

  • Fit is described for Black Max models

The Amptyhub G6 is a 32.8 ft complete feed hose assembly for Polaris Black Max 280 and 380 cleaners. It includes a UWF, back-up valve and in-line filter assembly.

That stated fit is narrower than some other picks, so confirm your cleaner is a Black Max model before choosing it. Amptyhub also says it is not compatible with Polaris 360.

The included inline parts make this a candidate for replacing an older assembly where those pieces are also due for replacement. Its black, blue and silver color description is distinct from the white G5 and D45 options.

Choose this for a Black Max cleaner when the complete assembly needs replacement. If your cleaner is a standard Polaris 280, confirm the fit details for your exact model and part before ordering.

Amptyhub G6 Pool Cleaner Feed Hose ReplacementCheck it on Amazon
8

Hypolinx Polaris Compatible Pool Cleaner Hose Replacement: Best for a longer replacement run

Hypolinx Polaris Compatible Pool Cleaner Hose Replacement, Polaris 280 replacement hoses and feed hose assemblies
8.2/10Our score
  • 30 ft feeder hose
  • PVC and rubber blend
  • For Polaris 280, 380 and 180
  • Not compatible with Polaris 360

A 30 ft Hypolinx feeder hose for buyers replacing a longer run. Hypolinx describes the hose as tangle resistant and made with a rubber-enhanced blend.

See it on Amazon

Pros

  • 30 ft length
  • PVC and rubber blend

Cons

  • Does not include a complete assembly's listed fittings

The Hypolinx compatible hose gives you 30 ft of feed hose in one longer replacement run. It uses a hybrid PVC and rubber blend and is stated to fit Polaris 280, 380 and 180.

Hypolinx describes this Gen2 hose as tangle resistant and designed for underwater balance. It also states that the hose is not compatible with Polaris 360.

The 30 ft length can be useful when a 10 ft section is too short for the repair you have planned. It is still a hose replacement rather than a complete assembly with a UWF, floats, nuts, swivels, filter and backup valve.

Choose it when you need a longer feed hose run and don't need a complete kit of fittings. For a broader cleaner comparison, see our guide to the best Polaris pressure pool cleaner.

Hypolinx Polaris Compatible Pool Cleaner Hose ReplacementCheck it on Amazon

Which Polaris 280 hose part should you replace?

Identify the damaged part before choosing a kit: feed hose sections connect the cleaner to the wall fitting, while the B5 sweep hose and K30 feed pipe sit on the cleaner. Swivels and nuts connect hose sections, so inspect those joints if the leak or movement problem appears there.

A complete assembly is a sensible option when several hose sections or fittings are worn. Compare the G5 and MAKHOON kits by their included parts, and check whether your old in-line filter or backup valve needs to be reused or replaced.

For a single damaged feed section, consider a D45 replacement. For a worn sweep hose, the Funmit B5 is the relevant part type; for a cracked cleaner-side hub, look at the K30 feed pipe.

How do you check Polaris 280 hose compatibility?

Match the cleaner model and part type, then compare the fittings and total hose layout with what you have. “Polaris 280 compatible” can refer to a full assembly, a D45 hose section or a cleaner-side part, and those are not interchangeable.

Several of these products specifically exclude the Polaris 360. If you have a 360, use a guide focused on that model, such as our Polaris 360 pool cleaner reviews, and verify the replacement's stated fit.

If your broader question is which pressure-side cleaner fits your pool, compare our guide to best Polaris pressure pool cleaners with the parts guide above. The 280 is one cleaner type, and choosing compatible parts starts with identifying the exact model.

How do feed hoses differ from pool backwash hoses?

A Polaris feed hose carries pressurized water to a pressure-side cleaner, while a pool backwash hose carries dirty water away from a filter during backwashing. They serve different jobs and aren't substitutes for each other.

If you need hose for filter maintenance, see our picks for the best pool backwash hose or a pool backwash hose reel. Those guides cover equipment for moving and storing discharge hose.

Which Polaris 280 replacement hose is right for you?

Choose the Polaris G5 when you want a genuine, pre-assembled 31 ft feed hose kit and can reuse its filter and backup valve. Pick MAKHOON's D20/D15 pack for worn joints, the Funmit B5 for a sweep hose, ATIE's K30 for a cracked feed pipe, or a D45 section for a single feed hose repair.

For a complete aftermarket assembly with the filter and backup valve included, compare MAKHOON and Amptyhub, while checking the Amptyhub Black Max fit. Review the best pressure side pool cleaners if you're still deciding which cleaner type to use.

Our top 3 picks at a glance

  1. 1 Polaris Genuine Parts G5 Feed Hose
    Best for a complete genuine assembly

    Polaris Genuine Parts G5 Feed Hose

    9.7/10 our score

    See it on Amazon
  2. 2 MAKHOON D20 Hose Swivel with D15 Nut
    Best for swivel and nut repairs

    MAKHOON D20 Hose Swivel with D15 Nut

    9.6/10 our score

    See it on Amazon
  3. 3 ATIE Pool Cleaner Feed Pipe K30
    Best for a cracked feed pipe

    ATIE Pool Cleaner Feed Pipe K30

    9.4/10 our score

    See it on Amazon

Frequently asked questions

How do I choose a Polaris 280 replacement hose?

Match the damaged part and cleaner model before choosing. A complete assembly replaces the connected feed hose system, while a D45 section, D20 swivel, D15 nut, sweep hose or K30 feed pipe addresses a specific part.

Check the part label and existing fittings so you don't replace more than needed.

Does a Polaris 280 hose fit a Polaris 360?

Don't assume it does. Several options here state that they do not fit the Polaris 360, including the MAKHOON swivel and nut pack, Funmit sweep hose and Hypolinx feed hoses.

The Polaris 360 uses a different cleaner setup, so confirm compatibility for the exact replacement part.

When should I replace the whole feed hose assembly?

Replace the whole assembly when multiple hose sections or fittings are worn, or when you want a pre-assembled kit. The Polaris G5 includes hose sections, floats, nuts, swivels and a UWF, but its in-line filter and back-up valve are not included.

Check what your old assembly still needs before ordering.

What is the difference between a feed hose and a sweep hose?

The feed hose carries pressurized water from the wall fitting to the cleaner. The sweep hose is the shorter hose at the cleaner that moves across pool surfaces to scrub debris.

A Polaris 280 replacement sweep hose such as a B5 is not a substitute for the longer feed hose.