9 Best Pool Filters for Inground Pools (November 2026)
The best pool filters for inground pools include the POOLPURE C1200 Pool Filter Replace Hayward CX1200RE for Hayward 120 sq ft replacements, the POOLPURE CCP420 Pool Filter Replaces Pentair Clean for a 4-pack of 105 sq ft cartridges, and the Swimara Ultra Series for Pentair CCP420 Pool for high-use pools.
On this page (7 sections)
- Which pool filter is best for most inground pools?
- The best pool filters for inground pools
- How do you choose a pool filter for an inground pool?
- Cartridge, sand or DE: which filter type fits an inground pool?
- How should you clean an inground pool filter cartridge?
- Do you need a multiport valve with a cartridge filter?
- Final verdict on the best pool filters for inground pools
The best pool filters for inground pools are correctly matched cartridge filters or complete filter units, not simply the products with the largest stated area. The right choice depends on your tank model, cartridge dimensions, filter area and how often your pool collects leaves, pollen or fine debris.
For saltwater-specific options, see our saltwater pool filter picks.
A cartridge that is too short, too wide or built for the wrong openings may not seat correctly. Start with our guide to pool pumps and filters if you are replacing more than the cartridge.
This roundup compares 9 options for common Hayward, Pentair and related systems. For Jandy models, see our Jandy pool filter sizing guide.
We checked the listed dimensions, filtration areas, media, pack sizes, cleaning guidance and compatibility references.
Our score weighs specs, features and buyer feedback against what you're shopping for.
Our picks at a glance
-
1
Best for Hayward 120 sq ft replacementsPOOLPURE C1200 Pool Filter Replace Hayward CX1200RE
9.6/10 our score
See it on Amazon -
2
Best for a 4-pack of 105 sq ft cartridgesPOOLPURE CCP420 Pool Filter Replaces Pentair Clean
9.6/10 our score
See it on Amazon -
3
Best for high-use poolsSwimara Ultra Series for Pentair CCP420 Pool
9.6/10 our score
See it on Amazon
- 4
Check itHayward StarClear Plus Cartridge Swimming Pool Filter
Best for a complete Hayward filter unit - 5
Check itCryspool 07077 Pool Filter Cartridges Replace CCP420
Best for CCP420 spare cartridges - 6
Check itTOREAD TRF-7471 Pool Filter Replace Pentair CCP420
Best for heavy-duty CCP420 use - 7
Check itChryseos Pool Filter Compatible with C-8412
Best for a single 120 sq ft cartridge - 8
Check itPureLumi CCP420 Pool Filter Replace PCC105
Best for easy-rinse CCP420 maintenance - 9
Check itiLiving ILG8CF150A Premium Pool & Spa Filter
Best for 150 sq ft systems
Which pool filter is best for most inground pools?
The best starting picks are the POOLPURE C1200 for a 120 sq ft Hayward-compatible cartridge, the POOLPURE CCP420 4-pack for a four-cartridge Pentair system, and Swimara Ultra for high-use CCP420 pools.
Your tank fit still decides the final choice. Most owners are replacing an existing cartridge rather than redesigning the equipment pad.
A 120 sq ft single element suits a tank built around one cartridge, while a CCP420 tank needs four 105 sq ft elements working together. If your current cartridge matches the POOLPURE C1200 size, that is a direct replacement path with less change to your routine.
If your tank holds four smaller cartridges, the POOLPURE CCP420 set gives you a matched group to install at the same time. Swimara Ultra fits the same CCP420 layout but is aimed at pools that collect pollen or fine debris more quickly.
Those three picks cover common replacements without implying that one size works for every tank. A replacement cartridge is not the same as a complete filter system.
If the tank, pressure gauge, or plumbing needs replacing, compare our guide to the best pool filter system before ordering a cartridge alone. A new cartridge will not fix a cracked tank, a leaking head, or plumbing that no longer connects correctly.
Check the gauge reading, the condition of seals, and the state of the tank before you assume a cartridge swap is enough. For a complete unit, the plumbing connections and the space around the tank matter as much as the filter area.
Measure the old cartridge and the tank opening before you decide, and keep the old label or model number handy for comparison. Small differences in length or diameter can stop a cartridge from seating properly, even when the model references look close.
When the fit is confirmed, you can then compare media, cleaning needs, and pack size with more confidence.
| Product | Best for | Filter area | Size | Openings | Our score |
|---|---|---|---|---|---|
| POOLPURE C1200 Pool Filter Replace Hayward CX1200RE | Hayward 120 sq ft replacements | 120 sq ft | 23 1/4 x 8 15/16 in | 4 in top and bottom | 9.6 |
| POOLPURE CCP420 Pool Filter Replaces Pentair Clean | a 4-pack of 105 sq ft cartridges | 26 x 7 in each | 3 in top and bottom | 9.6 | |
| Swimara Ultra Series for Pentair CCP420 Pool | high-use pools | 26 x 7 in each | 3 in open ends | 9.6 | |
| Hayward StarClear Plus Cartridge Swimming Pool Filter | a complete Hayward filter unit | 120 sq ft | 13.8 x 13.8 x 37.7 in | 9.4 | |
| Cryspool 07077 Pool Filter Cartridges Replace CCP420 | CCP420 spare cartridges | 26 1/16 x 7 in each | 3 in top and bottom | 9.2 | |
| TOREAD TRF-7471 Pool Filter Replace Pentair CCP420 | heavy-duty CCP420 use | 26 x 7 in each | 3 in top and bottom | 9.0 | |
| Chryseos Pool Filter Compatible with C-8412 | a single 120 sq ft cartridge | 120 sq ft | 23 5/16 x 8 15/16 in | 8.8 | |
| PureLumi CCP420 Pool Filter Replace PCC105 | easy-rinse CCP420 maintenance | 26 x 7 in each | 3 in top and bottom | 8.5 | |
| iLiving ILG8CF150A Premium Pool & Spa Filter | 150 sq ft systems | 150 sq ft | 31 1/8 x 10 1/16 in | 8.1 |
The best pool filters for inground pools
The products below are arranged by score, with the highest-scoring options first. Each pick serves a different tank size, cartridge layout or maintenance pattern.
POOLPURE C1200 Pool Filter Replace Hayward CX1200RE: Best for Hayward 120 sq ft replacements
- 120 sq ft material area
- 23 1/4 in length
- 8 15/16 in outside diameter
- Trilobal filtration fabric
A 120 sq ft cartridge for Hayward StarClear Plus C1200 and listed compatible models. Its trilobal fabric and 50-micron filtration layer suit owners replacing a worn 120 sq ft cartridge.
Pros
- 120 sq ft filtration area
- Trilobal filtration fabric
- Compatible with several listed 120 sq ft models
Cons
- Single cartridge only
- Must match the tank dimensions before ordering
The POOLPURE C1200 is a strong match for owners replacing a 120 sq ft Hayward StarClear Plus C1200 or CX1200RE cartridge.
It measures 23 1/4 in long and 8 15/16 in across, with 4 in top and bottom openings.
Its trilobal filtration fabric is designed to provide more adsorption surface than conventional filter fabric.
POOLPURE also describes a 50-micron filtration layer and a dirt-locking structure that releases trapped debris during rinsing.
The cartridge uses 4 oz polyester filter fabric, reinforced ABS end caps and an integrated core.
Those details matter when you clean and reinstall a cartridge several times during the season.
A single element of this size is easier to rinse than a multi-cartridge set, but it still needs regular checks as pressure rises.
The 120 sq ft area is suited to the tank it was listed for, not as a general upgrade for a smaller system.
This is a single replacement cartridge, so confirm that your tank uses one 120 sq ft element.
For more model-specific comparisons, see our guide to the best Hayward inground pool filter.
Rinse from top to bottom, inspect the pleats for wear and let the cartridge dry before storage if you are rotating spares.
That care helps the fabric and end caps hold up through repeated use.
POOLPURE CCP420 Pool Filter Replaces Pentair Clean: Best for a 4-pack of 105 sq ft cartridges
- 4-pack
- 105 sq ft each
- 26 in length
- Trilobal filtration fabric
This 4-pack is sized for Pentair CCP420 systems, with four 105 sq ft cartridges and trilobal filtration fabric. It fits owners who want a complete replacement set.
Pros
- Four cartridges in one set
- 420 sq ft total area
- Listed Pentair CCP420 compatibility
Cons
- Large 21 lb package weight
- Not a single-cartridge replacement
The POOLPURE CCP420 is for owners who need 4 cartridges at 105 sq ft each.
Together they provide 420 sq ft of stated material area, with each cartridge measuring 26 in long, 7 in across and using 3 in top and bottom openings.
The trilobal fabric is designed for fine debris capture and easier rinsing.
The reinforced core, ABS end caps and 4 oz polyester fabric are aimed at repeated cleaning in a four-cartridge system.
This set is listed for Pentair CCP420, Waterway Crystal Water 425 and related model references.
The 21 lb package is a practical consideration if you store replacement cartridges before installation.
Buying all four together means each element has the same size and media, which simplifies cleaning and rotation.
You can clean them as a set, check each pleat pack for damage and replace any cartridge that shows wear.
Buy this set when your system needs four matching elements, not one larger cartridge.
Verify the old cartridge dimensions before ordering.
A four-cartridge tank will not work correctly with a single large element, so pack size is part of the fit.
Swimara Ultra Series for Pentair CCP420 Pool: Best for high-use pools
- 4-pack
- 5 oz/sq yd trilobal media
- 10-micron particle capture claim
- 420 sq ft total
The Ultra Series uses 5 oz/sq yd trilobal media and is sized for Pentair CCP420 systems. It is aimed at high-use pools, heavy pollen and fine-debris conditions.
Pros
- Heavier 5 oz/sq yd media
- 4-pack format
- NSF/ANSI 50 certified
Cons
- Designed around CCP420 fit
- Cleaning still requires system depressurization
Swimara Ultra is the most targeted choice here for high-use Pentair CCP420 pools and heavier seasonal debris.
It includes four 105 sq ft cartridges, giving 420 sq ft total, with 26 in length, 7 in outside diameter and 3 in open ends.
The 5 oz/sq yd trilobal media is heavier than the regular media described for the other Swimara series.
Swimara positions it for heavy use, high pollen and raised fine-debris conditions, with particle capture described down to 10 microns.
The cartridges use molded polyurethane end caps, a reinforced polypropylene core and pleat bands.
For cleaning, depressurize the system and rinse from top to bottom.
Swimara says CCP420 owners should clean when pressure rises about 10 PSI above the clean starting pressure.
Choose it when your pool puts a heavier load on the filter.
Follow your own system manual for pressure and cleaning steps.
Heavier media can hold more fine material, but it also means you should watch pressure more closely during pollen season.
Inspect the pleat bands and core after each rinse so the pleats stay evenly spaced for the next run.
Hayward StarClear Plus Cartridge Swimming Pool Filter: Best for a complete Hayward filter unit
- 120 sq ft cartridge filter
- Single-element cartridge
- Pressure gauge
- Manual air relief valve
This is a complete Hayward StarClear Plus filter unit for inground pools, not only a replacement cartridge. Its single-knob head, pressure gauge and plumbing options simplify system access.
Pros
- Complete filter unit
- Multiple connection options
- Single-element cartridge design
Cons
- Much larger than a replacement cartridge
- Requires plumbing compatibility checks
The Hayward StarClear Plus is the choice when you need a complete 120 sq ft filter unit, not just a replacement cartridge.
It uses a single large cartridge and is made for inground pool and spa applications.
Its single-knob design secures the filter head to the tank without clamps or bolts.
The rotating head provides access to the cartridge, while the pressure gauge and manual air relief valve support routine filter checks.
Plumbing flexibility is a key feature.
The unit offers 1 1/2 in and 2 in FIP connections plus a 2 in SKT connection, so measure your existing plumbing before planning an installation.
This filter unit is much larger than the replacement cartridges in this roundup.
Read our comparison of the best Hayward pool filters if you are choosing between Hayward filter designs.
Because it is a complete unit, you are checking tank, head and connections together rather than matching a cartridge alone.
Leave working room to rotate the head and remove the cartridge without straining the plumbing lines.
That access makes routine cleaning simpler once the unit is installed.
Cryspool 07077 Pool Filter Cartridges Replace CCP420: Best for CCP420 spare cartridges
- 4-pack
- 4 x 105 sq ft
- 26 1/16 in length
- Trilobal fibers
Cryspool provides four 105 sq ft cartridges for listed CCP420 and related models. The trilobal material and rinse-focused design suit owners maintaining a four-cartridge system.
Pros
- Four-cartridge set
- Wide list of compatible model references
- 26 1/16 in length
Cons
- Compatibility depends on exact tank fit
- No single-cartridge option in this product
Cryspool 07077 suits owners who want four replacement cartridges for a Pentair CCP420-style system.
Each cartridge is 26 1/16 in long and 7 in across, with 3 in top and bottom openings and 105 sq ft of material area.
The trilobal fiber material is designed to hold debris through the pleats and release it during rinsing.
Cryspool recommends cleaning when the pressure gauge reaches your chosen maintenance point.
The 4-pack format gives you a complete set for systems using four cartridges.
Its compatibility references include CCP420, C-7471, R173576, PCC105-PAK4 and FC-6470, among other model numbers.
Choose this option when those references and dimensions match your existing cartridges.
Do not use the model list alone if your old cartridge has different physical measurements.
The slight length difference from a full 26 in should be checked against your tank interior before ordering.
Rinse each cartridge separately, inspect the end caps and seat them evenly so flow is shared across all four.
A matched set helps you avoid mixing old and new elements with different wear levels.
TOREAD TRF-7471 Pool Filter Replace Pentair CCP420: Best for heavy-duty CCP420 use
- 4-pack
- 4 x 105 sq ft
- Reinforced center support
- Chlorine-resistant materials
TOREAD's 4-pack replaces cartridges for Pentair CCP420 and listed related systems. Reinforced support, break-resistant end caps and chlorine-resistant materials target frequent pool use.
Pros
- Heavy-use construction details
- 4-pack replacement set
- Trilobal filtration fabric
Cons
- Not designed for backwashing
- Only fits systems using the listed dimensions
TOREAD TRF-7471 is built for frequent use in Pentair CCP420 systems.
The 4-pack contains four 105 sq ft cartridges, each measuring 26 in long and 7 in across, with 3 in top and bottom openings.
The reinforced center support and break-resistant end caps are aimed at keeping the cartridges stable during operation.
Chlorine-resistant materials and trilobal fabric add details for owners who clean and run their pool often.
TOREAD recommends cleaning every 2-4 weeks for optimal pool performance, but your pressure gauge and pool conditions should guide the schedule.
Pollen, leaves and heavy use can load cartridges sooner.
This cartridge is not designed for backwashing.
Depressurize the filter before removing it, and use the rinse method described for your system.
Frequent swimmers and screened or unscreened pools will load the fabric at different rates, so a fixed interval is only a starting point.
Check pressure after storms or parties, when more debris reaches the filter in a short time.
That habit protects water flow and reduces strain on the cartridges between full cleans.
Chryseos Pool Filter Compatible with C-8412: Best for a single 120 sq ft cartridge
- 1-pack
- 120 sq ft filtration area
- 23 5/16 in length
- 4 in open top and bottom
Chryseos is a single replacement cartridge for C-8412, C1200 and other listed 120 sq ft systems. Its dimensions make it a direct candidate when your old cartridge matches.
Pros
- Single replacement cartridge
- 120 sq ft area
- Listed Hayward-compatible models
Cons
- No multi-pack
- Exact model and dimensions still need checking
Chryseos is a practical choice for a single 120 sq ft replacement cartridge.
It measures 23 5/16 in long and 8 15/16 in across, with 4 in open top and bottom ends.
The cartridge is compatible with C1200E, C-8412, StarClear Plus C1200, CX1200RE, PA120, FC-1293 and other listed model references.
That makes it a candidate for several Hayward-compatible 120 sq ft tanks.
This is a 1-pack, so it fits a replacement need rather than a four-cartridge system.
The product description focuses on easy installation and cleaning with proper maintenance.
Measure the old cartridge before ordering because a similar model number does not guarantee identical dimensions.
Use the pool filter types guide if you are deciding whether to stay with cartridge filtration.
A single cartridge is a good fit when only one element is worn and the rest of the system is sound.
Rinse the pleats thoroughly, check the openings for cracks and confirm it seats fully before you restart the pump.
On a 120 sq ft tank, that simple check saves a return once the cartridge is wet and installed.
PureLumi CCP420 Pool Filter Replace PCC105: Best for easy-rinse CCP420 maintenance
- 4-pack
- 105 sq ft each
- 26 in length
- Not for backwashing
PureLumi supplies four cartridges for listed CCP420 and PCC105-related systems. Its point-bonded fiber structure is designed for quick rinsing, while the cartridge must not be backwashed.
Pros
- 4-pack format
- Listed CCP420 compatibility
- Designed for rinse cleaning
Cons
- Not for backwashing
- Shorter product dimensions differ slightly from some 26 in listings
PureLumi targets CCP420 and PCC105-style systems that use four 105 sq ft cartridges.
Each cartridge measures 26 in long and 7 in across, with 3 in top and bottom openings.
Its point-bonded fiber structure is designed to let contaminants rinse away more quickly.
PureLumi also describes a reinforced internal support structure and says the cartridges can support more than 10 cleaning cycles under proper use and maintenance.
The product is compatible with Pentair CCP420, 178584, Ultral-A6, C-7471 and other listed references.
It is also marked not for backwashing, so clean it by removing and rinsing the cartridge according to your system instructions.
Choose PureLumi when easy rinse care matters and the dimensions match.
Avoid treating the four-pack as a universal replacement for a single-cartridge tank.
Easy rinsing matters most when you clean often, because less time spent soaking or scrubbing makes regular care more likely.
Inspect the support structure after each clean to make sure the pleats have not collapsed or torn.
Replace a cartridge that no longer holds its shape, even if it still fits inside the tank.
The iLiving ILG8CF150A is the pick for a 150 sq ft filter system, making it the largest stated filtration area in this group.
It measures 31 1/8 in high, 10 1/16 in across and has a 6 in inner diameter.
The cartridge is listed as compatible with Pentair CC150, CCRP150, Unicel C-9415, Filbur FC-0687, Pleatco PAP150 and other model references.
Its trilobal fibers are designed to capture hair, leaves, dust, sediment and sand.
iLiving describes NSF/ANSI 50 certification through IAPMO and chlorine-resistant end caps.
The larger 150 sq ft design may support more filtration area, but it cannot replace a 120 sq ft cartridge simply because the number is higher.
Choose it only when your tank requires the listed 150 sq ft dimensions.
The bigger diameter and height change how the cartridge sits, so tank measurements are essential before ordering.
A 150 sq ft element in a smaller tank may block flow or fail to seat, while a smaller cartridge in a larger tank may not seal as intended.
Confirm height, outside diameter and inner diameter against the old cartridge to avoid that mismatch.
How do you choose a pool filter for an inground pool?
Choose a pool filter by matching the tank model, cartridge dimensions, filtration area and plumbing connections. The most important measurement is the one that lets the cartridge seat correctly inside the tank.
Check these details before ordering:
- Filter area: Match 105, 120 or 150 sq ft to the system requirement.
- Length: Compare the old cartridge from end to end.
- Outside diameter: A cartridge that is too wide may not fit inside the tank.
- Openings: Check top and bottom opening sizes and whether each end is open.
- Pack size: A CCP420 system may need 4 cartridges, while a 120 sq ft system may use 1.
- Connections: Complete filter units need plumbing connections that match your existing setup.
- Cleaning method: Cartridge filters are rinsed, and some products here are specifically marked not for backwashing.
The safest comparison is your old cartridge's model number plus its physical measurements. If those details disagree, pause and confirm the tank model before buying.
Cartridge, sand or DE: which filter type fits an inground pool?
Cartridge filters suit owners who want removable elements that can be rinsed. Sand and DE systems use different filter media and maintenance methods, so the filter type should match the existing plumbing and tank rather than the cartridge size alone.
Read which pool filter type should you choose for a broader comparison. This roundup focuses on cartridge products because the listed picks are replacement elements or cartridge filter units.
A cartridge filter also does not remove the need for circulation and surface cleaning. A robotic cleaner may collect debris in its own filter, but that does not replace the main pool filter.
See how a robotic pool cleaner filters water and why an automatic cleaner does not replace the pool filter for the difference.
How should you clean an inground pool filter cartridge?
Clean a cartridge by turning off the pump, releasing system pressure, and rinsing the pleats from top to bottom.
Use the pressure gauge and your filter manual to decide when the cartridge needs attention. Do not remove a pressurized cartridge tank.
After removing the cartridge, rinse between the pleats without forcing debris deeper into the fabric, and inspect the end caps, core, and pleat pack before reinstalling.
Some products specify pressure-based cleaning, such as about 10 PSI above clean starting pressure for Swimara CCP420 systems, while TOREAD suggests cleaning every 2 to 4 weeks. Treat those as product-specific guidance, then adjust for pollen, leaves, and pool use.
Never backwash a cartridge marked not for backwashing, including the TOREAD and PureLumi products here.
Start by shutting off the pump and following the manual steps to relieve pressure at the relief valve, and open the tank only when pressure has dropped. Lift the cartridge out slowly, then use a hose with a gentle spray from the top down so loosened material runs off the pleats.
Turn the cartridge as you go to reach each section, and pause on areas where leaves or sand are packed between pleats. Avoid wire brushes or harsh scrubbing that can tear the fabric or bend the pleats out of shape.
If debris stays lodged, soak the cartridge in a cleaner made for filter media, follow the product directions, rinse again, and check that water flows freely through the pleats. Look for tears, flattened pleats, cracked end caps, or a warped core during every cleaning, since those signs mean filtration may drop.
Reinstall the cartridge in the same orientation, seat it fully, and close the tank according to the manual. Restart the pump, check for leaks around the head, watch the gauge settle, and record the date and clean starting pressure.
In peak season, check more often if trees, grass, or storms add debris, since regular rinsing keeps flow steady and helps the cartridge last through more cycles.
Do you need a multiport valve with a cartridge filter?
You usually do not need a multiport valve for ordinary cartridge-filter cleaning because the cartridge is removed and rinsed.
A multiport valve matters more when your system is designed around filter, backwash, rinse, and related flow settings. If you are changing plumbing or replacing a valve, compare the best pool filter multiport valves with your filter tank and pump setup.
A valve should match the system connection size and intended filter type, so do not add a valve simply because it is common on another pool system. Confirm the manufacturer installation instructions and the existing plumbing layout first.
Cartridge systems clean by opening the tank, removing the element, and rinsing it by hand. That process does not use the backwash position that sand and DE systems rely on for cleaning.
A multiport valve controls flow direction through the filter, so it is central to those other filter types. On a cartridge tank, the head and seals handle opening and closing instead of a valve handle.
Adding a valve to a cartridge setup can complicate plumbing without improving filtration, and it may create connections that do not match the tank design or the pump output.
If your current setup already has a valve, check whether it is part of the filter design or a leftover from an earlier system. Some equipment pads were changed over time, and old fittings can remain after a filter swap.
Read the tank manual to see which parts are required for normal operation and whether a valve is listed as part of the system. If you are replacing a valve, match the connection size to the existing pipes and the filter head, since a mismatch can cause leaks, pressure loss, or poor circulation through the tank.
Also confirm that the valve positions match your filter type, because backwash settings are not needed for rinse-clean cartridges. Turn off the pump and relieve pressure before you loosen any valve or plumbing joint, and check seals and O-rings while the system is open.
Test the setup at low pressure first, watch each joint for drips, and keep the valve handle labels clear so anyone servicing the pool knows the correct position. When in doubt, ask a pool professional to review the plumbing layout before you buy parts.
In most cartridge-only setups, careful rinsing and pressure checks matter more than adding a valve.
Final verdict on the best pool filters for inground pools
The POOLPURE C1200 is the best fit for a 120 sq ft Hayward-compatible replacement, while the POOLPURE CCP420 4-pack suits owners replacing all four 105 sq ft cartridges.
Pick Swimara Ultra when your CCP420 pool sees high use, pollen or fine debris.
Choose the Hayward StarClear Plus when you need a complete filter unit.
Pick iLiving only for a compatible 150 sq ft system, and compare every cartridge's length, diameter, openings and pack size before ordering.
Those choices work because fit comes first in every case.
A 120 sq ft cartridge, a set of four 105 sq ft cartridges and a 150 sq ft cartridge serve different tanks and cannot be swapped by area alone.
The complete Hayward unit is different again, because it includes the tank, head and plumbing options rather than a cartridge alone.
Match the old cartridge measurements and the tank model, then use media and cleaning needs as the next filter.
That approach keeps a good product from becoming a poor fit in your system.
Our top 3 picks at a glance
-
1
Best for Hayward 120 sq ft replacementsPOOLPURE C1200 Pool Filter Replace Hayward CX1200RE
9.6/10 our score
See it on Amazon -
2
Best for a 4-pack of 105 sq ft cartridgesPOOLPURE CCP420 Pool Filter Replaces Pentair Clean
9.6/10 our score
See it on Amazon -
3
Best for high-use poolsSwimara Ultra Series for Pentair CCP420 Pool
9.6/10 our score
See it on Amazon
Frequently asked questions
What is the best pool filter for an inground pool?
The best pool filter is the cartridge that matches your tank's model, dimensions and filtration area. For a 120 sq ft Hayward-compatible system, choose a matching 120 sq ft cartridge.
For a Pentair CCP420 system, compare the 4-pack options here by media, cleaning guidance and construction details.
How do I choose a pool filter for an inground pool?
Start with the old cartridge or filter tank model, then confirm length, outside diameter, openings and filter area. A 105 sq ft cartridge is not a substitute for a 120 or 150 sq ft design.
Check plumbing connections too when replacing a complete filter unit.
Are cartridge filters good for inground pools?
Cartridge filters suit many inground pools because the cartridge can be removed and rinsed instead of using a backwash cycle. They still need regular cleaning and replacement.
Follow the filter manual, depressurize the system first and never backwash cartridges marked as not for backwashing.
What size pool filter do I need?
You need the size specified for your filter tank, not simply the largest cartridge available. Compare the old cartridge's length, diameter, opening size and filtration area.
The 120 sq ft and 150 sq ft products here serve different systems, while CCP420 replacements use four 105 sq ft cartridges.
About this guide: Our look at pool filters for inground pools draws on maker specs, materials and what owners report. See how we research.


