Best picks

9 Best Filters for Saltwater Pools (November 2026)

Updated on · By the Pool Care Pilot team

The best best salt water pool filters for saltwater pools include the INTEX Krystal Clear for above ground saltwater pools, the Swimara Essential Series for Pentair CCP420 Pool for occasional use CCP420 pools, and the POOLPURE CCP420 Pool Filter Replaces Pentair Clean for fine particle capture.

On this page (7 sections)
  1. Best salt water pool filters for every setup
  2. How we compared saltwater pool filters
  3. What size pool filter do you need for a saltwater pool?
  4. Sand filter or cartridge filter: which works better with salt?
  5. How do you size and maintain CCP420 cartridges?
  6. How much sand does a saltwater pool filter need?
  7. Best salt water pool filters: final picks

The best salt water pool filters depend on whether you own an above ground pool with a sand pump or an in ground pool with a cartridge tank. The INTEX Krystal Clear 2,100 GPH system is the top overall pick here because it combines sand filtration, salt conversion and timers in one setup for pools from 2,600 to 8,500 gallons.

For Pentair CCP420 tanks, the Swimara Essential Series and POOLPURE sets give you matched 4-packs with 420 sq ft of total filter area.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared flow rates, filter area, cartridge size, media weights, sand capacity and stated compatibility across these nine options.

We also checked which products are complete systems, which are replacement parts, and which only support filling or refilling.

Start with your current equipment before you compare brands. If you have an above ground pool and no separate salt system, a complete sand and salt package saves guesswork.

If you already own a CCP420 tank, a cartridge set is the direct fix. Our guide to pool pumps and filters helps you decide which path fits your pool.

Our picks at a glance

  1. 1 INTEX Krystal Clear
    Best for above ground saltwater pools

    INTEX Krystal Clear

    9.7/10 our score

    See it on Amazon
  2. 2 Swimara Essential Series for Pentair CCP420 Pool
    Best for occasional use CCP420 pools

    Swimara Essential Series for Pentair CCP420 Pool

    9.7/10 our score

    See it on Amazon
  3. 3 POOLPURE CCP420 Pool Filter Replaces Pentair Clean
    Best for fine particle capture

    POOLPURE CCP420 Pool Filter Replaces Pentair Clean

    9.6/10 our score

    See it on Amazon
  1. 4Swimara Ultra Series for Pentair CCP420 PoolCheck it
  2. 5GLACIER FRESH Garden Hose Filter Pre-Filter

    GLACIER FRESH Garden Hose Filter Pre-Filter

    Best for filling pools with hose water
    Check it
  3. 6Palmetto 2 Pack Swimming Pool Filter Sand

    Palmetto 2 Pack Swimming Pool Filter Sand

    Best for sand filter refills
    Check it
  4. 7Cryspool 07077 Pool Filter Cartridges Replace CCP420Check it
  5. 8INTEX Krystal Clear

    INTEX Krystal Clear

    Best for larger above ground pools
    Check it
  6. 9Fil-fresh CCP420 Pool Filter Compatible with PentairCheck it

Best salt water pool filters for every setup

The best salt water pool filters in this group split into three jobs: complete above ground systems, CCP420 cartridge replacements, and support items like filter sand and a fill water pre-filter. For Jandy systems, see our Jandy pool filter sizing guide.

Choose by the job first, then compare specs inside that job.

1

INTEX Krystal Clear: Best for above ground saltwater pools

INTEX Krystal Clear, best salt water pool filters for saltwater pools
9.7/10Our score
  • 2,100 GPH pump flow and 1,600 GPH system flow
  • QS1200 saltwater system and 77 lb sand capacity
  • Suitable for 2,600 to 8,500-gallon pools
  • Built-in timers for pump and saltwater system

A complete sand pump and saltwater system for above ground pools from 2,600 to 8,500 gallons. It pairs sand filtration with salt conversion in one setup.

See it on Amazon

Pros

  • Includes pump, sand filtration and saltwater system
  • Timers support scheduled operation
  • Sand can last up to 5 years with regular backwashing

Cons

  • Partial assembly required
  • Sized for above ground pools in the stated gallon range

This INTEX system suits above ground pool owners who want filtration and salt conversion without buying parts separately. The 2,100 GPH pump flow and 1,600 GPH system flow show the difference between pump capacity and the flow through the full setup.

That gap matters when you set run times for your pool size.

The QS1200 saltwater system splits dissolved salt into chlorine through electrolytic cells. Intex says chemical use drops, and the built-in timer runs self-cleaning modes on 6, 10 or 14-hour cycles.

The sand pump has its own timer with 2 to 12-hour preset cycles.

Sand capacity is 77 lb for the 14-inch tank, and Intex says sand can last up to 5 years with regular backwashing. Partial assembly is required, and the set includes two 1.5 inch connector hoses.

Trade-off: this is the broadest setup here, but it only fits above ground pools from 2,600 to 8,500 gallons. It does not replace a cartridge set for a Pentair in ground tank.

INTEX Krystal ClearCheck it on Amazon
2

Swimara Essential Series for Pentair CCP420 Pool: Best for occasional use CCP420 pools

Swimara Essential Series for Pentair CCP420 Pool, best salt water pool filters for saltwater pools
9.7/10Our score
  • 4-pack, 105 sq ft each, 420 sq ft total
  • 7 in OD x 26 in long, 3 in open ends
  • 3 oz/sq yd round-fiber media
  • PU end caps, PP core and pleat bands

A 4-pack of CCP420 cartridges for Pentair and Waterway systems. The 3 oz round-fiber media suits regular residential use.

See it on Amazon

Pros

  • Matches CCP420 size stated for Pentair systems
  • Rinses with a garden hose
  • NSF/ANSI 50 certified

Cons

  • Verify size before ordering
  • Clean when pressure rises about 10 PSI for Pentair CCP420

This Swimara set suits Pentair CCP420 owners who want a straightforward 4-pack for regular residential use. Each cartridge gives 105 sq ft of filter area, and the four together give 420 sq ft.

The size is 7 in outside diameter by 26 in long, with 3 in open ends.

The media is 3 oz/sq yd round-fiber material, lighter than the Ultra Series in this group. It helps capture common dirt and debris while supporting steady water flow.

Molded PU end caps, a reinforced PP core and pleat bands help the pleats keep even spacing.

Cleaning is a garden hose rinse from top to bottom between the pleats. For Pentair CCP420 systems, Swimara says to clean when pressure rises about 10 PSI above the clean starting pressure.

Trade-off: this set favors occasional to regular use rather than heavy pollen loads. If your pool sees heavy debris, the heavier Ultra Series may fit better.

Swimara Essential Series for Pentair CCP420 PoolCheck it on Amazon
3

POOLPURE CCP420 Pool Filter Replaces Pentair Clean: Best for fine particle capture

POOLPURE CCP420 Pool Filter Replaces Pentair Clean, best salt water pool filters for saltwater pools
9.6/10Our score
  • 4-pack, 105 sq ft each
  • 26 in long, 7 in outside diameter, 3 in openings
  • Trilobal filtration fabric and 50-micron layer
  • 4 oz polyester fabric with reinforced ABS end caps

A 4-pack of CCP420 replacement cartridges with trilobal fabric and a 50-micron filtration layer. It suits owners focused on fine dirt and sediment.

See it on Amazon

Pros

  • Trilobal fabric for fine particle capture
  • NSF/ANSI 50 certified
  • Reusable after rinsing

Cons

  • Compatible spare part, not a Pentair original
  • Confirm 26 in length and 7 in diameter first

This POOLPURE set suits CCP420 owners who care most about fine particles. Each cartridge has 105 sq ft of area in a 26 in by 7 in size with 3 in top and bottom openings.

The trilobal fabric gives more surface area than conventional fabric, according to POOLPURE.

A 50-micron filtration layer targets fine particles such as hair, dust and sand. POOLPURE says it removes up to 99% of fine particles in that layer.

The fabric is 4 oz thickened polyester, with reinforced ABS end caps and a strengthened core.

The set fits Pentair CCP420 and listed Waterway and other models. POOLPURE notes it is an independent compatible spare part, and the brand names are used for reference only.

Trade-off: the fine filtration focus is a strength for clear water, but you still need to rinse and inspect the cartridges on schedule. Pair it with our guide on pool filter types if you are unsure between cartridge and sand.

POOLPURE CCP420 Pool Filter Replaces Pentair CleanCheck it on Amazon
4

Swimara Ultra Series for Pentair CCP420 Pool: Best for heavy use and pollen

Swimara Ultra Series for Pentair CCP420 Pool, best salt water pool filters for saltwater pools
9.6/10Our score
  • 4-pack, 105 sq ft each, 420 sq ft total
  • 7 in OD x 26 in long, 3 in open ends
  • 5 oz/sq yd trilobal media
  • PU end caps, PP core and pleat bands

A heavy duty 4-pack of CCP420 cartridges with 5 oz trilobal media. It suits high use pools and heavy pollen conditions.

See it on Amazon

Pros

  • Heavier 5 oz media than the Essential Series
  • Trilobal fibers for fine particles
  • NSF/ANSI 50 certified

Cons

  • Needs more frequent checks in pollen season
  • Verify size before ordering

This Swimara Ultra Series set suits high use pools, heavy pollen and pools with more fine debris. Each cartridge gives 105 sq ft of filter area, with 420 sq ft across the 4-pack.

The dimensions match the Essential Series at 7 in by 26 in.

The key upgrade is the 5 oz/sq yd trilobal media. Swimara says the trilobal fibers capture particles as small as 10 microns.

The heavier media construction is built for demanding seasonal conditions rather than light weekly use.

PU end caps, a PP core and pleat bands support the heavier pleat pack. That support helps the pleats stay spaced under pressure.

It also helps the set seat the same way each time you reinstall it in the tank.

Cleaning follows the same pattern for most CCP420 owners. Depressurize the tank first, then rinse top to bottom between the pleats.

Inspect more often during pollen season or after heavy use.

Trade-off: heavier media can load faster in dirty water, so expect more frequent checks. For a quiet pool with light debris, the Essential Series is the simpler match.

Swimara Ultra Series for Pentair CCP420 PoolCheck it on Amazon
5

GLACIER FRESH Garden Hose Filter Pre-Filter: Best for filling pools with hose water

GLACIER FRESH Garden Hose Filter Pre-Filter, best salt water pool filters for saltwater pools
9.4/10Our score
  • 2-pack garden hose pre-filter
  • Coconut shell activated carbon
  • Rated for up to 8,000 gallons
  • Flow rate of 0.66 gallons per minute

A hose pre-filter for filling pools, spas and inflatable pools. Activated carbon helps reduce chlorine, odor and sediment in fill water.

See it on Amazon

Pros

  • No tools needed for hose connection
  • Reduces chlorine and sediment in fill water
  • Two filters in the pack

Cons

  • Pre-filter only, not a main pool filter
  • Life depends on usage and water quality

This GLACIER FRESH pre-filter suits pool owners who fill a pool, spa or inflatable pool from a garden hose. It is not a main filter, and that limit is also its strength.

The 2-pack gives you a spare when the first filter reaches its capacity.

Coconut shell activated carbon helps reduce chlorine, odor, taste and sediment in fill water. The filter is rated for up to 8,000 gallons, with a flow rate of 0.66 gallons per minute.

That flow rate tells you filling will take longer than an open hose.

Installation needs no tools. Connect the hose, run water through it for 30 seconds, then place the hose in the pool.

Standard plumbing connections fit this design.

Keep the spare in mind if you fill more than one pool or a large tub. Life depends on usage and on how dirty the source water is.

That makes a pre-filter a simple support item, not a set and forget part.

Trade-off: it only cleans water as it enters the pool. Your sand or cartridge filter still needs to run daily to keep the water clear after filling.

GLACIER FRESH Garden Hose Filter Pre-FilterCheck it on Amazon
6

Palmetto 2 Pack Swimming Pool Filter Sand: Best for sand filter refills

Palmetto 2 Pack Swimming Pool Filter Sand, best salt water pool filters for saltwater pools
9.3/10Our score
  • 2 pack, 50 lb bag each
  • Natural silica, 20-40 sieve
  • Screens leaves, oils, dust and hair
  • Granular form for residential and commercial systems

Replacement sand for sand filter pumps, supplied as two 50 lb bags of natural silica. It suits refilling a sand tank that calls for pool filter sand.

See it on Amazon

Pros

  • Two bags for a full refill in many tanks
  • Washed and screened silica
  • Captures leaves, dust, oils and hair

Cons

  • Sand only, with no pump or tank included
  • Check your tank capacity before buying

This Palmetto sand suits owners refilling a sand filter pump that calls for pool filter sand. The set has two 50 lb bags of natural silica in a 20-40 sieve range.

That gives you 100 lb total for tanks that need a full refill.

Washed and screened sand helps capture leaves, dirt, dust, sunscreen oil and hair as water passes through the tank. The granular form fits residential and commercial filtration pump systems that call for this type of media.

Each bag covers an area of 18 square inches to a depth of 3 inches, according to Palmetto. Use your pump manual to confirm the exact amount for your tank before you open the second bag.

Store the extra bag dry and sealed until you need it. That keeps the second half clean for a later top up or full change.

It also avoids opening both bags at once if your tank takes less than 100 lb.

Trade-off: this is media only, with no pump, tank, fittings or instructions for a specific model. If you need a complete system, the INTEX setups above cover that job.

Palmetto 2 Pack Swimming Pool Filter SandCheck it on Amazon
7

Cryspool 07077 Pool Filter Cartridges Replace CCP420: Best for CCP420 value replacement

Cryspool 07077 Pool Filter Cartridges Replace CCP420, best salt water pool filters for saltwater pools
9.2/10Our score
  • 4-pack, 4 x 105 sq ft
  • 26-1/16 in long, 7 in diameter, 3 in openings
  • Trilobal fiber material
  • Compatible with CCP420 and listed models

A 4-pack of CCP420 replacement cartridges with trilobal fiber media. It fits listed Clean and Clear Plus 420 systems after a size check.

See it on Amazon

Pros

  • Trilobal fiber for thorough filtration
  • Easy to rinse and reuse
  • Fits listed CCP420 models

Cons

  • Independent brand, not a Pentair original
  • Measure the old cartridge before ordering

This Cryspool set suits CCP420 owners who want a solid 4-pack without paying for a brand name tied to the tank maker. Each cartridge gives 105 sq ft of filter area, and the four together give 420 sq ft.

Length is 26-1/16 in, with a 7 in diameter and 3 in openings.

Trilobal fiber material gives this set its filtration claim. Cryspool says the material processes water more thoroughly and supports a longer service life than common point-bond fabric.

End caps and pleats are built to hold position through rinsing.

The set fits Clean and Clear Plus 420, CCP420 and a long list of listed part numbers. Cryspool notes it is an independent brand, and manufacturer names are used for reference only.

Trade-off: cleaning on schedule matters more than the media claim alone. Cryspool recommends cleaning when the pressure gauge reaches the set value for your system.

Cryspool 07077 Pool Filter Cartridges Replace CCP420Check it on Amazon
8

INTEX Krystal Clear: Best for larger above ground pools

INTEX Krystal Clear, best salt water pool filters for saltwater pools
8.7/10Our score
  • 2,650 GPH pump flow and 2,150 GPH system flow
  • QS1200 saltwater system and 120 lb sand capacity
  • Suitable for 4,800 to 15,000-gallon pools
  • 2-year limited warranty

A larger INTEX sand pump and saltwater system for above ground pools from 4,800 to 15,000 gallons. It moves more water than the smaller INTEX system here.

See it on Amazon

Pros

  • Higher flow for larger above ground pools
  • Includes saltwater system and timers
  • 2-year limited warranty

Cons

  • Larger and heavier tank setup
  • Partial assembly required

This INTEX system suits larger above ground pools that need more flow than the smaller INTEX setup. The pump moves 2,650 GPH, and the system flow is 2,150 GPH.

That higher flow helps pools from 4,800 to 15,000 gallons.

The QS1200 saltwater system again splits dissolved salt into chlorine through electrolytic cells. The salt system timer runs self-cleaning modes on 6, 10 or 14-hour cycles.

The pump timer offers 2 to 12-hour preset cycles.

Sand capacity is 120 lb for the 16-inch tank. Intex says sand can last up to 5 years with regular backwashing.

Partial assembly is required, and two 1.5 inch connector hoses are included.

Set up takes more care than a small tank because of the larger sand load. Plan where the tank will sit before you add sand.

That saves lifting a full tank later.

Trade-off: the larger tank and 120 lb sand load take more space and effort to move than the smaller system. Choose it for pool size, not just for extra flow.

INTEX Krystal ClearCheck it on Amazon
9

Fil-fresh CCP420 Pool Filter Compatible with Pentair: Best for high flow cartridge use

Fil-fresh CCP420 Pool Filter Compatible with Pentair, best salt water pool filters for saltwater pools
8.0/10Our score
  • 105 sq ft per cartridge
  • 26 in long, 7 in diameter, 3 in openings
  • High density pleated fabric
  • NSF/ANSI 50 certified

A CCP420 replacement cartridge with 105 sq ft of pleated fabric for Pentair Clean and Clear Plus 420 systems. It aims for steady flow without constant pressure buildup.

See it on Amazon

Pros

  • 105 sq ft of filtration area
  • Rinses clean with a garden hose
  • NSF/ANSI 50 certified

Cons

  • Measure the old cartridge before ordering
  • Service life depends on regular use and cleaning

This Fil-fresh cartridge suits Pentair CCP420 owners who want high flow from a single replacement cartridge. It gives 105 sq ft of filtration area in a 26 in by 7 in size with 3 in openings.

High density pleated fabric packs that area into the standard CCP420 shape.

The design aims for steady water movement without constant pressure buildup. Fil-fresh says more pleats mean more surface area, so water moves through more freely during peak swim season.

That matters when a family pool sees daily use.

It fits Pentair Clean and Clear Plus 420 and listed OEM part numbers, with no modifications stated. The cartridge is NSF/ANSI 50 certified and rinses with a garden hose or pressure washer.

Trade-off: Fil-fresh says service life reaches up to 1 year under regular use. Your actual life depends on debris load, cleaning frequency and how often you check pressure.

Fil-fresh CCP420 Pool Filter Compatible with PentairCheck it on Amazon

How we compared saltwater pool filters

We compared complete systems against replacement parts, because they solve different problems. A sand pump with a saltwater system serves an above ground pool without a separate filter tank.

A CCP420 cartridge only fits a tank already built for that size.

We checked flow rates for the INTEX systems and filter area for the cartridge sets. Flow tells you how fast water moves through a complete setup.

Filter area tells you how much surface a cartridge set uses to catch debris.

We also looked at media weight and sieve size where brands stated them. Heavier trilobal media suits heavier debris loads, while standard round-fiber media suits regular use.

Sand sieve size affects how the media bed catches small particles.

Compatibility got equal weight. Every CCP420 cartridge here states a 26 in length and 7 in diameter, but you should still measure your old cartridge.

For brand specific options, see best Hayward pool filters and our picks for best pool filters for inground pools.

What size pool filter do you need for a saltwater pool?

The right size starts with your pool volume and your current tank type. Above ground pools from 2,600 to 8,500 gallons fit the smaller INTEX system, while pools from 4,800 to 15,000 gallons fit the larger one.

In ground pools with a CCP420 tank need 420 sq ft of total cartridge area across a 4-pack.

Do not size by pump flow alone. System flow is what moves through the full setup, and it is lower than pump flow on both INTEX systems.

Run time also matters, because a larger pool needs more hours of filtration each day.

For cartridge tanks, size is about fit as much as area. A 26 in by 7 in cartridge with 3 in openings is the standard shape in this group.

Measure your old cartridge before you order a new set.

Salt level does not change the filter size you need. The salt system and the filter do separate jobs, so volume and tank type should drive the choice.

Pick the setup that matches the pool you already own.

For above ground pools

Use the gallon range on the pump, not the pump flow alone. The smaller INTEX system has a 1,600 GPH system flow, and the larger one has a 2,150 GPH system flow.

Match that system flow with your pool volume and daily run time.

For in ground cartridge tanks

Measure length, diameter and opening size before you order. All five CCP420 sets here use about 26 in by 7 in with 3 in openings, but a small mismatch can stop a cartridge from seating.

Keep the old cartridge or its part number when you shop.

Sand filter or cartridge filter: which works better with salt?

Both work with saltwater pools, because the filter and the salt system do separate jobs. The salt system makes chlorine from dissolved salt.

The filter removes dirt, hair and other debris from the water.

Choose sand for simple long term media

Sand can last up to 5 years with regular backwashing in the INTEX systems. That long media life suits above ground pools where a complete pump and salt package is the goal.

Backwashing remains part of the routine.

Choose a cartridge for easy rinsing

Cartridges rinse with a garden hose and do not need backwashing. That makes them a good fit for in ground tanks that already use CCP420 cartridges.

Check pressure often, because a loaded cartridge raises pressure faster than worn sand.

Remember the cleaner does not replace the filter

A robotic cleaner can move debris and filter some water as it runs, but it does not replace your main filter. Read How Does a Robotic Pool Cleaner Filter Water? and Why Does an Automatic Cleaner Not Replace the Pool Filter? before you skip filter run time.

How do you size and maintain CCP420 cartridges?

CCP420 cartridges need a size check and a pressure based cleaning plan. Each set here gives 105 sq ft per cartridge and 420 sq ft per 4-pack.

That total area is the standard for the Pentair CCP420 size in this group.

Clean the cartridges when pressure rises about 10 PSI above the clean starting pressure for Pentair CCP420 systems. Depressurize the tank first, then rinse between the pleats from top to bottom with a garden hose.

Inspect pleats while you rinse. Bent pleats, deep stains or torn bands can reduce flow even after a rinse.

Rotate cartridges if your manual allows it, and keep a clean set ready during peak swim season.

Compare media weights for your debris load

The Swimara Essential Series uses 3 oz/sq yd round-fiber media for regular use. The Swimara Ultra Series uses 5 oz/sq yd trilobal media for heavy use and pollen.

POOLPURE uses trilobal fabric with a 50-micron layer for fine particles.

Match the pack to your replacement plan

A 4-pack lets you swap in clean cartridges while you rinse the used set. That matters for pools that get daily use through summer.

Buy the best C1200 pool filter cartridge only if your tank uses that different size.

How much sand does a saltwater pool filter need?

Sand amount depends on your tank size, not on salt level. The smaller INTEX system uses 77 lb of sand in a 14-inch tank.

The larger INTEX system uses 120 lb of sand in a 16-inch tank.

The Palmetto set gives two 50 lb bags, for 100 lb total. That amount can fill many tanks, but your manual sets the exact fill level.

Overfilling or underfilling can change flow through the bed.

Use the manual amount for your exact model first. Tank diameter and media depth set the fill line, not a guess based on pool gallons.

Add sand in stages if your manual allows it, and check the level as you go.

Backwash on the schedule in your manual, and check the pressure gauge if your system has one. Sand can last for years, but compacted or dirty sand loses efficiency long before it wears out.

A regular backwash lifts trapped debris and evens out the bed.

Saltwater use does not shorten sand life by itself. Debris load, swim use and backwash habit matter more in daily care.

Sunscreen oil and fine dust can coat the bed faster in busy pools.

When you refill, empty the old sand and rinse the tank before you add new media. That clears out sludge that new sand would sit on top of.

It also lets you see if any part of the tank needs attention.

Keep extra sand dry and sealed between refills. Moisture and dirt can affect media that sits open in a garage.

A sealed bag is easy to store and ready when the bed needs a top up.

Trade-off: buying sand in 50 lb bags is simple, but it is heavy to carry and pour. Plan help for lifting bags into a raised tank.

That small step makes a full refill much safer and cleaner.

Best salt water pool filters: final picks

The best salt water pool filters for above ground pools are the INTEX Krystal Clear systems, because they pair sand filtration with salt conversion and timers. The 2,100 GPH system fits pools from 2,600 to 8,500 gallons.

The 2,650 GPH system fits pools from 4,800 to 15,000 gallons.

For Pentair CCP420 tanks, the Swimara Essential Series is the safest regular use pick, with 420 sq ft across four cartridges. The Swimara Ultra Series fits heavy pollen and high use pools with its 5 oz trilobal media.

The POOLPURE set fits owners focused on fine particles, and the Cryspool and Fil-fresh sets give more budget options in the same size.

Add Palmetto filter sand when your sand tank needs fresh media. Add the GLACIER FRESH hose pre-filter when you fill a pool from a hose and want cleaner fill water.

Match the pick to the job you already have. A complete system suits a pool with no separate salt setup.

A cartridge set suits a tank that already fits CCP420 size.

Then start with our best pool filter system guide if you want a broader look at complete setups beyond saltwater pools.

Our top 3 picks at a glance

  1. 1 INTEX Krystal Clear
    Best for above ground saltwater pools

    INTEX Krystal Clear

    9.7/10 our score

    See it on Amazon
  2. 2 Swimara Essential Series for Pentair CCP420 Pool
    Best for occasional use CCP420 pools

    Swimara Essential Series for Pentair CCP420 Pool

    9.7/10 our score

    See it on Amazon
  3. 3 POOLPURE CCP420 Pool Filter Replaces Pentair Clean
    Best for fine particle capture

    POOLPURE CCP420 Pool Filter Replaces Pentair Clean

    9.6/10 our score

    See it on Amazon

Frequently asked questions

Do saltwater pools need a different filter type?

No. Saltwater pools still use sand, cartridge or diatomaceous earth filtration.

The salt system converts salt to chlorine, and the filter removes debris from the water.

Can I use regular pool filter sand in a saltwater pool?

Yes, if your sand filter calls for pool filter sand. Use the sieve size and amount listed in your pump manual, then backwash on schedule.

How often should I clean CCP420 cartridges?

For Pentair CCP420 systems, clean the cartridges when pressure rises about 10 PSI above the clean starting pressure. Rinse between the pleats with a garden hose.

Does a hose pre-filter replace a pool filter?

No. A hose pre-filter cleans fill water only.

Your main sand or cartridge filter still needs to circulate and clean the pool water every day.