Which Pool Filter Cartridge Type Do You Need?
The right pool filter cartridge type is the one that matches your filter's model, dimensions and connection design. Type A, Type I and Type A/C labels are useful starting points, but they are not universal sizing standards.
On this page (8 sections)
- What do pool filter cartridge types mean?
- Is a Type A pool filter cartridge right for your pump?
- What is a Type I pool filter cartridge?
- Are cartridge pool filters type A suitable for every pool?
- When does a larger cartridge filter make sense?
- How do you check pool filter cartridge compatibility?
- How should you clean and replace a cartridge?
- Which pool filter cartridge type should you choose?
The right pool filter cartridge type must match your filter model and the old cartridge measurements. Labels such as Type A, Type I and Type A/C can narrow the search, but they do not replace a compatibility check.
Two cartridges can look alike on a shelf and still seat very differently in a housing. A small change in length or end cap shape can stop the filter from sealing and closing properly.
A cartridge filter removes debris as pool water passes through pleated filter media. The pump moves water through the cartridge, the media traps particles, and cleaner water returns to the pool.
The pleats give the cartridge much more surface area than a flat sheet of the same size. More surface area helps the filter keep catching dirt without choking off flow as quickly.
Water enters the cartridge, passes through the pleated media, and leaves through the center core. Particles too large to pass through stay trapped in and between the pleats.
A dirty cartridge can hurt circulation even before the water looks cloudy. As the pleats clog, the pump must work harder to push the same volume through a smaller open area.
That loss of flow also affects how well the pool turns over its water. If pressure rises or flow feels weak, the cartridge is a likely cause to check first.
Your filter label may show a cartridge type, model number or replacement part number. Record that information before searching, because similar labels can describe cartridges with different dimensions.
Start with the brand and model number on the filter or pump housing. That pairing points you to parts made for your equipment instead of parts that merely share a name.
If the label is faded, check the manual or the cartridge itself for a part number. Many owners find a code printed on the end cap or molded into the plastic frame.
Take a photo of those details so you can compare them while shopping. A photo also helps if you need to talk with a seller or a pool technician later.
Measure the old cartridge when the model number is unclear. Note its length, outside diameter and the shape of the top and bottom openings, and do not rely on width alone.
Keep the old cartridge until the new one is fitted and the system is running. That way you can compare the two side by side if anything looks off.
Clean water, proper flow and a correct fit all start with this basic match. Taking a few minutes to check it can save a return and keep the pool running well.
What do pool filter cartridge types mean?
Pool filter cartridge types are manufacturer labels for a cartridge family, not one universal industry size. Type A, Type I and Type A/C may look similar in search results while differing in length, diameter or opening design.
Think of the label as a short name for a group of parts from one maker. It tells you which family to start with, not the exact size that will fit your housing.
That is why one brand's Type A should not be assumed to fit another brand's Type A housing. Each maker sets its own dimensions, cap designs and core details.
The type label is useful when you already know the filter brand and model. It becomes less reliable when used by itself, especially for older equipment or replacement cartridges sold for several systems.
Older equipment adds another wrinkle because labels can fade or manuals can be missing. In that case the old cartridge and the housing become your best reference.
Some replacement cartridges are sold for more than one filter model. That wider compatibility can be handy, but it also means you must check the exact model list instead of trusting a broad claim.
Some cartridges are made for compact above-ground filter pumps. Others are large elements inside complete filtration systems for bigger above-ground, on-ground or inground pools.
A compact pump cartridge is usually a small, single element that fits inside a small housing. A large system cartridge may be one of several elements inside a tall tank.
Filtration area is another clue to what a cartridge family is meant to do. More pleated surface can hold more debris before flow drops, which suits larger pools or heavier debris loads.
Flow also matters because the cartridge must match what the pump can move. A cartridge built for a small pump may not suit a high flow system, even if the diameter looks close.
Read our Pool Pumps and Filters: The Complete Buying Guide for the larger relationship between pump flow, filter size and routine maintenance. That guide helps you place the cartridge in the wider setup.
When you shop, read the type label together with the full model details. The label should point you to the right family, and the model and measurements should confirm the fit.
Is a Type A pool filter cartridge right for your pump?
A Type A cartridge is right only when its model compatibility and dimensions match your filter. The INTEX 29002E is a Type A cartridge for INTEX filter pumps, including models 28603EG, 28637EG and 28635EG.

A two-pack Type A cartridge for compatible INTEX filter pumps, made with easy-to-clean Dacron paper and intended for routine cartridge replacement.
See it on AmazonThe INTEX 29002E Type A cartridge measures 4.2 in deep by 8.4 in wide by 8.1 in high. Compare those measurements with your old cartridge before you assume a fit.
The two pack contains two cartridges for compatible INTEX filter pumps. Having a spare lets you swap in a clean cartridge while the used one is washed and inspected.
The cartridge uses easy-to-clean Dacron paper media. Rinsing the pleats with clean water is the basic care step between replacements.
It is made for INTEX Krystal Clear cartridge filter pumps and is listed for models 28603EG, 28637EG and 28635EG. That model list is the strongest sign that this cartridge suits your pump.
INTEX recommends replacing cartridges every two weeks for maximum efficiency in an above ground pool. That timing depends on pool use and debris, so inspect the cartridge rather than treating the interval as a fixed rule.
A pool with daily use, trees or windblown dirt may load a cartridge faster. A lightly used pool with a cover may give the same cartridge more time.
Rinse the cartridge and check the pleats and end caps during each change. Torn media, crushed pleats or a loose cap are signs the cartridge should not stay in service.
HydroAeration Technology is part of the wider INTEX filtration system described with this cartridge. It is presented as improving circulation, clarity and freshness, but it does not mean you can stretch cleaning intervals.
Choose this option only when your pump model matches the listed INTEX compatibility. If your equipment uses another brand or a different shape, Type A in the name does not confirm fit.
See our guide to the best replacement pool filter cartridges for more options and replacement planning.
What is a Type I pool filter cartridge?
A Type I cartridge is a separate cartridge label, so you should verify its measurements instead of treating it as a Type A substitute. The same basic checks apply: model number, length, outside diameter, opening size and end-cap design.
Type I should be read as its own family name. It does not promise the same fit as Type A, even when the two names appear close in search results.
Both labels are short and both describe pleated cartridges, so the separation is easy to miss. The safe move is to compare the parts in hand rather than the names on a listing.
Searches for pool filter cartridge type I can return cartridges from different brands and systems. Before ordering, remove the old cartridge, photograph its label and measure it with a ruler or tape.
A photo keeps the brand, model and part number together for checking against a listing. Write your measurements down next to the photo so the details stay in one place.
Check these points:
- The filter or pump brand
- The filter model number
- Cartridge length, including end caps
- Outside diameter
- Top and bottom opening shape
- Whether the cartridge has a handle or other molded feature
- The number of cartridges used inside the filter
Each point guards against a different mismatch. Length and diameter check the main body, while openings and molded features check how the cartridge seats.
The number of elements matters because some housings hold one cartridge and others hold several. A single cartridge will not fill a housing built for a set.
End caps deserve close attention because they control the seal and the water path. A cap that looks minor can be the part that stops a housing from closing.
If the old cartridge is collapsed, torn or coated with debris, compare its measurements with the filter housing as well. A distorted cartridge can give you an inaccurate size, and rinsing it gently can reveal a printed code or molded mark.
When in doubt, match the filter model first and use the measurements as a check. That order reduces the chance of buying a cartridge that is close in size but wrong in design.
Are cartridge pool filters type A suitable for every pool?
Cartridge pool filters type A are suitable only for systems designed around that cartridge family. A compact Type A replacement may suit a small above-ground pump, while a larger pool filter may require a cartridge with much more filtration area.
The complete Hayward XStream system is a different type of purchase from a small replacement cartridge. It combines an above-ground cartridge filter and pump system with a 1.5 HP Hayward PowerFlo Matrix pool pump.

A complete above-ground filter and pump system for someone replacing the filtration equipment rather than buying a small Type A replacement cartridge.
See it on AmazonThe system weighs 75 lb and measures 29.6 in long by 21.6 in wide by 37.3 in high. It uses corded electric power at 115 volts and has a gray thermoplastic filter body.
Its large filter body is intended to provide more debris-holding capacity and longer filtering cycles than a compact cartridge setup. The Easy-Lok ring gives quick access to internal components, and the system is engineered for flexible or rigid plumbing.
Choose this system only when you need a complete above-ground filtration setup and have confirmed the plumbing and installation requirements. It is not a replacement cartridge for an existing Type A or Type I housing.
When does a larger cartridge filter make sense?
A larger cartridge filter makes sense when the pool system needs more filtration area and higher flow capacity. The XtremepowerUS 425 Sq.
Ft. Swimming Pool Cartridge Filter has four filter elements, 425 sq. ft. of filtration area and 2 in inlet and outlet ports.

A large four-element filter system for in-ground or above-ground pools, spas and water features that need 425 sq. ft. of filtration area and 2 in plumbing connections.
See it on AmazonThis system has a 150 GPM flow rating and is designed for high-flow mechanical filtration. Its stated turnover figures are 72,000 gallons in 8 hours and 90,000 gallons in 10 hours.
The filter tank measures 24 by 24 by 39.5 in and weighs 70.4 lb. Its reinforced polymer tank is described as corrosion-resistant and UV-resistant, with an easy-open locking ring for access to the four cartridges.
This is a system-level choice, not a Type A or Type I replacement for a small pump. Confirm the pool plumbing, available space and required flow before choosing a filter of this size.
For an inground setup, compare the options in our best cartridge pool filter for inground pool guide.
How do you check pool filter cartridge compatibility?
Check compatibility in this order:
- Write down the filter or pump brand and model number.
- Find the cartridge type or replacement part number printed on the old filter.
- Measure the old cartridge's length and outside diameter.
- Compare the top and bottom openings.
- Check whether the replacement is sold as a single cartridge or a multipack.
- Confirm that the replacement is designed for your filter model.
- Make sure the new cartridge fits the housing without forcing it into place.
The model number is usually more useful than a broad search for “filter cartridge pool type.” Search by brand, model and cartridge type together, then compare the physical measurements.
Do not choose by outside diameter alone. A cartridge can have a similar width but a different length, opening or end-cap shape.
If you are comparing Type A/C options, our best pool filter cartridge type a/c guide can help you review that cartridge family.
How should you clean and replace a cartridge?
Turn off the pump before opening the filter housing, then follow the equipment instructions for releasing pressure. Remove the cartridge, rinse the pleats with a steady stream of clean water and inspect the media for tears, crushed sections or permanent blockage.
Avoid forcing a dirty cartridge back into the housing. A cartridge that stays clogged after rinsing may need replacement, especially when water flow remains weak or pressure rises quickly after cleaning.
Keep a spare that matches the exact filter model. The INTEX Type A two-pack is designed for compatible INTEX filter pumps, while the Hayward and XtremepowerUS examples above represent larger system choices rather than interchangeable small cartridges.
A robotic cleaner can collect debris in its own filter system, but that does not make it a replacement for the pool's main filter. See How Does a Robotic Pool Cleaner Filter Water? and Why Does an Automatic Cleaner Not Replace the Pool Filter? for how those systems differ.
Which pool filter cartridge type should you choose?
Choose the cartridge by filter model first, physical fit second and type label third. A Type A cartridge can suit a compatible INTEX pump, while a Type I or Type A/C cartridge needs its own model and measurement check.
That order keeps the decision grounded in your equipment. The model number tells you what the maker intended, and the measurements confirm the part in hand matches it.
For a compact replacement, start with the pump model and compare the INTEX Type A details. The INTEX 29002E is listed for filter pump models 28603EG, 28637EG and 28635EG.
If your pump is one of those models, the Type A label and the model list point in the same direction. You should still compare the old cartridge before you order.
For a complete above ground replacement, consider the Hayward XStream system. It pairs a cartridge filter with a 1.5 HP Hayward PowerFlo Matrix pool pump.
That system is a different purchase from a small replacement cartridge. It suits an owner who needs the filter and pump together rather than one new element.
The Hayward system measures 29.6 in long by 21.6 in wide by 37.3 in high and weighs 75 lb. It uses corded electric power at 115 volts and has a gray thermoplastic body.
Its Easy-Lok ring is designed for quick access to internal parts. The system is also engineered for flexible or rigid plumbing, which can ease setup.
For a large pool or spa setup, check whether the XtremepowerUS 425 sq. ft. system and its 2 in ports match your equipment. That system uses four elements and is rated at 150 GPM.
Its stated turnover figures are 72,000 gallons in 8 hours and 90,000 gallons in 10 hours. Those figures help you judge whether the size suits a larger pool or spa.
The tank measures 24 by 24 by 39.5 in and weighs 70.4 lb. Its reinforced polymer tank is described as corrosion-resistant and UV-resistant for outdoor use.
The safest rule is simple: match the brand and model, measure the old cartridge, compare the openings and confirm the replacement before ordering. If your filter uses a Hayward pump motor, our guide to the best Hayward 1 HP pool pump motor may help with the wider equipment decision.
Frequently asked questions
What does Type A mean on a pool filter cartridge?
Type A is a cartridge label used by some pool filter brands, including Intex. It does not guarantee that every Type A cartridge fits every pump, so match the cartridge with your filter model, dimensions and manufacturer compatibility information before ordering.
Are Type A and Type I pool filter cartridges the same?
Type A and Type I are different labels, and you should not assume they are interchangeable. Compare the cartridge's outside diameter, length, opening design and filter model compatibility with the cartridge you are replacing.
How do I know which pool filter cartridge I need?
Find the filter or pump model number, then compare it with the replacement cartridge's compatibility information. Measure the old cartridge if the model number is unclear, including its length, outside diameter, opening shape and any top or bottom handle.
What is a Type A/C pool filter cartridge?
Type A/C usually refers to a cartridge family that may fit more than one compatible filter design. The label alone is not enough to confirm fit, so check the filter model and compare the cartridge's measurements before buying.
About this guide: Our look at pool filter cartridge types draws on maker specs, materials and what owners report. See how we research.


