5 Best Hayward 1 HP Pool Pump Motors (November 2026)
The best Hayward 1 HP pool pump motors include the Aquastrong Pool Pump Motor for broad Hayward fit checks, the ATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP for UST1102 and SP2607X10 matches, and the VEVOR 1.0 HP Pool Pump Motor for rotation and electrical checks.
On this page (4 sections)
The best Hayward 1 HP pool pump motor for most compatible replacements is the Aquastrong Pool Pump Motor. Its 56J frame, 1 HP rating, 115/230V dual voltage and 3450 RPM single-speed design cover the core checks many Hayward owners need to make.
That matters because a motor only helps when the rest of the pump can still do its job. If the wet end, seal area and housing are sound, a motor swap can restore circulation without changing the whole pump.
The dual voltage setting suits pools wired for either 115V or 230V. That flexibility makes the first check easier, although the wiring still has to match the setting you choose.
Single speed operation also keeps daily use simple. The motor runs at one steady speed for filtration and circulation, so there is no speed control to set during normal pool care.
A replacement motor makes sense when the wet end and pump housing remain in good condition. If the housing, diffuser or other wet-end parts are worn, compare the repair cost and fit before choosing a motor alone.
That check protects you from fitting a new motor to a pump with weak flow for another reason. A worn diffuser, damaged seal or leaking connection can keep circulation low even when the motor starts well.
It also helps you judge downtime. A focused motor replacement can be a shorter repair when the mounting and shaft already match, while a wider wet-end repair may need more parts and time.
For broader system planning, start with our guide to pool pumps and filters. If you need a wider comparison, see the best hayward pool pump motor roundup.
Use those guides to place the motor choice in the full system. Filter condition, plumbing and electrical supply all affect whether a replacement will run as expected.
Check the old label before you order anything. Frame, shaft, rotation and mounting pattern still decide the final fit, so take a photo and compare each detail before you pay.
Our picks at a glance
-
1
-
2
Best for UST1102 and SP2607X10 matchesATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP
9.2/10 our score
See it on Amazon -
3
- 4
Check itAquastrong Riptide Series 1.5 HP In/Above Ground
Best for a complete dual-speed pump change - 5
Check itZynovate UST1102 1HP Swimming Pool Pump Motor
Best for listed UST1102 part matches
The best Hayward 1 HP pool pump motor picks
The top three choices are 1 HP replacement motors with 56J formats or closely related replacement details. The Aquastrong Riptide belongs lower because it is a complete 1.5 HP pump, not a direct 1 HP motor replacement.
Our score weighs frame and electrical details, stated Hayward compatibility, shaft information, rotation details and how closely each option matches the search for a Hayward 1 HP replacement. We compared the available specifications.
| Product | Best for | Frame | Voltage | Speed | Our score |
|---|---|---|---|---|---|
| Aquastrong Pool Pump Motor | broad Hayward fit checks | 56J NEMA | 115/230V dual voltage | 3450 RPM, single speed | 9.5 |
| ATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP | UST1102 and SP2607X10 matches | 56J | 9.2 | ||
| VEVOR 1.0 HP Pool Pump Motor | rotation and electrical checks | 9.1 | |||
| Aquastrong Riptide Series 1.5 HP In/Above Ground | a complete dual-speed pump change | 220V | Dual speed | 8.9 | |
| Zynovate UST1102 1HP Swimming Pool Pump Motor | listed UST1102 part matches | 56J | 8.8 |
Aquastrong Pool Pump Motor: best for broad Hayward fit checks
Aquastrong Pool Pump Motor: Best for broad Hayward fit checks
- 56J frame
- 1 HP, 1 THP and 1 SF
- 115/230V dual voltage
- 3450 RPM single speed
This motor combines the common 56J frame with dual voltage and a round flange design. Its stated compatibility includes select Hayward Super Pump, Super II, Northstar and Max-Flo models.
Pros
- 56J mounting format
- Dual voltage
- 1 HP and 3450 RPM
Cons
- Compatibility still needs model and dimension checks
- Single speed only
The Aquastrong Pool Pump Motor is the strongest overall match when your old motor uses a 56J frame and needs flexible voltage selection. It runs at 3450 RPM in single-speed mode and supports 115V or 230V, so the voltage setting can match different pool circuit setups.
The motor is rated at 1 HP, with 1 THP and 1 SF stated in the product details. Its round flange and standard shaft-end design are intended for compatible pool pump systems, but the exact mounting dimensions still need to match your wet end.
Aquastrong names select Hayward Super Pump, Super II, Northstar and Max-Flo models among its compatibility examples. That does not make every motor from those series interchangeable, so compare the old label and mounting pattern before you order.
This is a good first choice when you want a direct motor repair and your pump housing remains usable. It is less suitable if you need dual-speed operation or if your system requires a different frame, rotation or shaft arrangement.
ATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP: best for UST1102 and SP2607X10 matches
ATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP: Best for UST1102 and SP2607X10 matches
- 56J frame
- 5/8 in 1045 steel threaded shaft
- 115/230V dual voltage
- 3450 RPM single speed
The model number and shaft details make this a useful choice when they match your old motor. It is described as a replacement for select Hayward Super, Super II and Max-Flow pumps.
Pros
- Clear UST1102 and SP2607X10 identity
- Dual voltage
- 5/8 in threaded shaft
Cons
- Single speed only
- Confirm the shaft and mounting details first
The ATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP is a focused choice when the UST1102 or SP2607X10 model details match your old motor. It uses a 56J frame, 115/230V dual voltage and 3450 RPM single-speed operation.
That focused identity suits owners who can read the old label clearly. A model match gives you a firmer starting point than horsepower alone, especially when other details are close.
Its stated shaft is a 5/8 in 1045 steel threaded shaft. That measurement matters because a motor can have the right horsepower and frame while still failing to match the pump's shaft or impeller connection.
The threaded shaft also affects set-up in daily use. The impeller and related parts have to seat correctly, so a small difference in size or thread can stop the repair before it starts.
ATVMaster describes compatibility with Hayward Super, Super II and Max-Flow pumps, along with Jacuzzi Magnum pumps. Those examples help narrow the search, but they do not replace a check against your exact pump.
The motor also has an integrated pedestal base and wiring instructions for switching between 115V and 230V. Clear wiring guidance helps during installation, although power should still be off at the breaker while connections are checked.
Choose this model when the model number and shaft details line up with your current equipment. If your old motor label does not show UST1102 or SP2607X10, compare the shaft, flange and mounting holes before treating it as a replacement.
That extra check is worth the time before ordering. A quick photo of the old label and mounting face can prevent a return and keep the pool downtime shorter.
VEVOR 1.0 HP Pool Pump Motor: best for rotation and electrical checks
VEVOR 1.0 HP Pool Pump Motor: Best for rotation and electrical checks
- 3450 RPM
- 115V or 230V operation
- 90μF/250V capacitor
- CCW rotation and 56J flange
This option gives more electrical and rotation details for a careful match. Its 56J round flange, CCW rotation and stated shaft measurements should be compared with the old motor.
Pros
- CCW rotation is stated
- 115V and 230V current details
- Steel housing
Cons
- Rotation must match the pump
- No Hayward series compatibility is stated in the data
The VEVOR 1.0 HP Pool Pump Motor is useful when rotation and electrical details are central to your comparison. It is a 1 HP, 3450 RPM motor with a 56J round flange, CCW rotation and operation at 115V or 230V.
The stated current is 9.8 amps at 115V and 4.9 amps at 230V. It also lists a 90μF/250V capacitor, a 1.4 service factor and a steel housing, giving you several label details to compare with the motor you are replacing.
The shaft extension is stated as 47.5 to 47.75 mm, with a 7/16-20UNF-2A output screw thread and a 3/8-16UNC thread size. Those measurements are especially important when the old motor has a threaded connection that must meet the existing pump assembly.
Choose VEVOR when the CCW rotation and electrical values match your system. The data does not name specific Hayward pump series, so use the 56J flange and shaft measurements as part of a careful fit check.
Aquastrong Riptide Series 1.5 HP In/Above Ground: best for a complete dual-speed pump change
Aquastrong Riptide Series 1.5 HP In/Above Ground: Best for a complete dual-speed pump change
- 1.5 HP motor
- 220V dual speed
- Up to 6,604 GPH
- 1.5 in and 2 in adapters
This is a complete 1.5 HP pump rather than a 1 HP replacement motor. Consider it only when you are changing the pump system and the 220V, plumbing and flow details fit.
Pros
- Dual-speed operation
- 1.5 in and 2 in adapters
- Filter basket included
Cons
- Not a like-for-like 1 HP motor replacement
- 220V only
The Aquastrong Riptide Series 1.5 HP In/Above Ground is not a direct 1 HP replacement motor. It is a complete 1.5 HP, 220V dual-speed pool pump for buyers considering a broader pump change.
High speed is stated at up to 6,604 GPH, while low speed is stated at 3,302 GPH. That gives you a different operating choice from the single-speed replacement motors above, but it also changes the equipment, wiring and flow decision.
The pump includes a filter basket and 1.5 in and 2 in adapters. It is described for both in-ground and above-ground systems, with a maximum lifting height of 63 feet.
Choose this only when a complete pump replacement fits your plumbing and electrical setup. It is a poor match for a simple motor-only repair because its 1.5 HP rating, 220V supply and dual-speed design do not mirror a 1 HP single-speed motor.
Zynovate UST1102 1HP Swimming Pool Pump Motor: best for listed UST1102 part matches
Zynovate UST1102 1HP Swimming Pool Pump Motor: Best for listed UST1102 part matches
- 56J frame
- 115/230V dual voltage
- 3450 RPM
- 304 stainless steel threaded shaft
This motor is aimed at buyers matching the UST1102 model and listed replacement numbers. It also states compatibility with select Hayward Max Flow, Super, Super II and Northstar pumps.
Pros
- UST1102 model match
- Dual voltage
- Automatic thermal protection stated
Cons
- Confirm the exact replacement number
- Single speed only
The Zynovate UST1102 1HP Swimming Pool Pump Motor is aimed at buyers who can match the UST1102 model or one of its listed replacement part numbers. It uses a 56J frame, 115/230V dual voltage and 3450 RPM single-speed operation.
The motor lists a 1.1 service factor, a 304 stainless steel threaded shaft and 3/8-16UNC mounting holes. Those details help narrow the fit, especially when you can read the old motor label and inspect the mounting points.
Zynovate names select Hayward Max Flow, Super, Super II and Northstar pumps among its compatibility examples. It also states automatic thermal protection and a capacitor-start design, but those features do not remove the need to confirm the equipment match.
Choose this model when the UST1102 number, frame and shaft details line up. If your motor has a different model or mounting pattern, compare it with the Aquastrong or ATVMaster options before deciding.
How to match a Hayward 1 HP pool pump motor
The right Hayward 1 HP pool pump motor must match more than horsepower. For the work sequence, follow Hayward pool pump motor replacement steps.
Use the old motor label and the pump assembly to check the following details before you remove the existing motor.
Check the motor label first
Write down the old motor's horsepower, voltage, RPM, frame, model and service factor. Also record whether it is single speed or dual speed.
Those label details form the first pass for any replacement. They tell you the power class, electrical setting and basic mounting format before you look at shaft or rotation.
Service factor is easy to skip, but it can matter in daily use. It relates to how the motor handles load, so a different value may change the running margin under normal pool conditions.
Model and frame should be read together. A shared frame size can still hide a different shaft length, thread type or mounting hole position on the pump face.
The products here include several shared 1 HP and 3450 RPM details, but their model numbers and shaft descriptions differ. The ATVMaster and Zynovate options use the UST1102 identity, while VEVOR gives specific CCW rotation and shaft measurements.
That mix shows why a spec sheet comparison helps. Two motors can look alike at first glance, yet differ in the exact points that decide fit and wiring.
Take a photo of the label before removing the motor. The photo stays readable later, even when the old casing is dusty or the print is worn.
Note the pump series as well as the motor model. Hayward compatibility examples can guide the search, but the full system still needs a direct match.
Check rotation before you promise an easy swap. A motor turning the wrong way will not move water correctly through the pump, even if every other detail looks right.
Confirm voltage against the circuit, not just the motor. Dual voltage options are useful, but the selected setting and the pool supply have to agree.
Finally, compare the shaft diameter, thread and extension with the old setup. That physical check is often the one that saves a costly order.
Confirm the frame and mounting pattern
A 56J frame is common across several choices here, including Aquastrong, ATVMaster, VEVOR and Zynovate. Still, compare the flange, mounting holes, shaft position and base with the old motor.
The motor must sit squarely against the pump housing. A mismatch can affect the impeller position, seal alignment and the connection between the motor and wet end.
Match voltage and wiring
Several choices support 115V/230V dual voltage, but the circuit and wiring must match the selected setting. VEVOR also gives separate current values for the two voltage options.
Turn off power at the breaker before inspecting wiring, and use a qualified electrician if you are unsure about the circuit. The motor's voltage label should agree with the pool equipment and supply.
Confirm shaft and rotation
The shaft connects the motor to the impeller, so diameter, thread and extension length matter. ATVMaster lists a 5/8 in threaded shaft, while VEVOR lists a 47.5 to 47.75 mm shaft extension and CCW rotation.
Do not assume that two motors with the same horsepower and frame will use the same shaft. Compare the old motor and pump assembly before ordering.
What other Hayward pump parts may need attention?
A new motor will not correct every circulation problem. If the motor runs but the pump still leaks, loses prime or has weak flow, inspect the wet-end parts before assuming the motor is the only issue.
Those symptoms can point in different directions. A leak may come from a seal or connection, weak flow may come from a clogged filter or worn diffuser, and loss of prime may involve air entry in the suction side.
Start by separating motor symptoms from water path symptoms. Noise, failure to start or overheating lean more toward the motor, while leaks and poor flow need a closer look at the pump parts that handle water.
A clogged filter can also affect circulation; compare Hayward replacement filter cartridges if your filter needs service. Filter pressure and flow should be checked before a motor is blamed.
A dirty filter can place extra load on the system and make a sound motor seem weak in daily use. Cleaning or replacing a filter is often a simpler step than changing parts.
If the seal area is worn, review the best Hayward pool pump seal kit options. A damaged diffuser can also affect water movement, so the Hayward Super Pump diffuser guide may help with the next check.
Seal wear can allow water into places it should not reach. That makes the part worth checking early, especially when a leak appears near the motor or pump joint.
A diffuser helps guide water through the pump in a controlled way. Damage there can reduce flow even when the motor turns at the right speed and in the right direction.
For a leak at the drain point, see the guide to the Hayward Super Pump drain plug. If the diffuser seal is the problem, compare the Hayward Super Pump diffuser gasket replacement steps.
Small leak points are easy to overlook during a motor swap. Checking plugs and gaskets while the pump is open can save a second repair once water is running again.
A badly worn housing may call for a larger repair than a motor swap. In that case, review the Hayward Super Pump wet end guide before buying a replacement motor.
Housing condition affects alignment and sealing. If the body is cracked, warped or badly worn, a new motor may not sit or seal as it should.
How to choose among these Hayward motor replacements
Pick the Aquastrong Pool Pump Motor when you need the broadest stated Hayward series coverage among the 1 HP motor options and your equipment matches its 56J, dual-voltage format.
That choice suits owners starting with a compatible 56J setup. The dual voltage setting adds flexibility, while the single-speed design keeps normal operation straightforward.
Pick the ATVMaster or Zynovate when your old label points to UST1102 or SP2607X10 details. Pick VEVOR when CCW rotation, current values and shaft measurements are the deciding checks.
Those picks follow the label rather than the brand. A clear model match or a clear rotation match can be more useful than a general claim of compatibility.
Choose the Aquastrong Riptide only for a planned complete pump change. Its 1.5 HP, 220V dual-speed design makes it a different project from replacing a worn 1 HP motor.
That distinction matters for plumbing and electrical planning. A complete pump brings new connections and a different power requirement, so it should be planned as a system change.
Dual speed can suit daily circulation in some setups. Low speed may help with quieter routine running, while high speed can support stronger flow when the system needs it.
Even with those benefits, the Riptide does not solve a simple motor only repair. Comparing it with a 1 HP motor can lead to the wrong order if the goal is only to replace the old motor.
Before ordering any option, compare the old motor label, frame, shaft, rotation, voltage and mounting pattern. That short check matters more than the brand name printed on the replacement.
Keep the comparison practical and in order. Label first, then mounting face, then shaft and rotation, then voltage and wiring.
If two options still look close, use the details that differ most. Shaft measurements and rotation often carry more weight than a shared horsepower rating.
Our top 3 picks at a glance
-
1
-
2
Best for UST1102 and SP2607X10 matchesATVMaster UST1102 SP2607X10 Pool Pump Motor 1HP
9.2/10 our score
See it on Amazon -
3
Frequently asked questions
What should I check before buying a Hayward 1 HP pool pump motor?
Check the old motor's model number, horsepower, frame, voltage, speed, rotation, shaft and mounting pattern. A 56J frame alone does not prove a complete fit.
Also compare the pump series and the motor's flange and shaft dimensions before ordering.
Can any 1 HP motor replace a Hayward pool pump motor?
No. Horsepower is only one part of the match.
The replacement also needs the correct frame, voltage, shaft, rotation and mounting arrangement for the wet end.
The Aquastrong, ATVMaster and Zynovate choices here state compatibility with select Hayward pump series, but you still need to confirm your exact equipment.
Is a 1.5 HP pump a replacement for a 1 HP Hayward motor?
Not as a direct motor swap. The Aquastrong Riptide is a complete 1.5 HP, 220V dual-speed pump, so it changes the pump system rather than simply replacing a 1 HP motor.
Check plumbing, electrical service and required flow before considering that type of change.
What does 56J mean on a pool pump motor?
A 56J designation identifies a motor frame and mounting format used by some pool pump motors. It helps narrow the choices, but it does not confirm the shaft, rotation, voltage or wet-end fit by itself.
Use the full motor label and measurements for the final match.
About this guide: Our look at Hayward 1 HP pool pump motors draws on maker specs, materials and what owners report. See how we research.


