Best picks

9 Best DE Pool Filters for Inground Pools (November 2026)

Updated on · By the Pool Care Pilot team

The best DE pool filters for inground pools include the POOLPURE® FS-2005 DE Grid Pool Filter Replace for DE grid replacement, the Swimara Ultra Series for Pentair CCP420 Pool for heavy-use cartridge systems, and the XtremepowerUS 22-Inch Sand Filter for Inground for sand-filter simplicity.

On this page (6 sections)
  1. The best DE filter for an inground pool and the strongest alternatives
  2. How do you choose a DE filter for an inground pool?
  3. DE filter, cartridge filter or sand filter?
  4. What should you check before installing a DE filter?
  5. How do you maintain a DE pool filter?
  6. Verdict: which DE filter should you choose?

The best DE filter for an inground pool is the Hayward ProGrid 60 sq. ft. when you need a complete DE filter system. The POOLPURE FS-2005 is the top replacement-grid choice, while the other picks cover cartridge and sand systems for owners who prefer different upkeep.

DE filters use diatomaceous earth powder on internal grids. After backwashing, a pool backwash hose reel can help manage the discharge hose.

That powder helps capture very fine debris, but DE systems require correct powder loading, pressure checks and backwashing.

If you're comparing the whole circulation setup, start with our guide to pool pumps and filters. For a plain explanation of the filter type, see what is a DE pool filter.

Our score weighs specs, features and buyer feedback against the needs of someone shopping for the best DE filter for an inground pool. We compared DE systems first, then included cartridge and sand alternatives because filter type changes cleaning work, plumbing needs and installation choices.

Our picks at a glance

  1. 1 POOLPURE® FS-2005 DE Grid Pool Filter Replace
    Best for DE grid replacement

    POOLPURE® FS-2005 DE Grid Pool Filter Replace

    9.7/10 our score

    See it on Amazon
  2. 2 Swimara Ultra Series for Pentair CCP420 Pool
    Best for heavy-use cartridge systems

    Swimara Ultra Series for Pentair CCP420 Pool

    9.6/10 our score

    See it on Amazon
  3. 3 XtremepowerUS 22-Inch Sand Filter for Inground
    Best for sand-filter simplicity

    XtremepowerUS 22-Inch Sand Filter for Inground

    9.5/10 our score

    See it on Amazon
  1. 4VEVOR 2026 PRO Cartridge Pool Filter Tank

    VEVOR 2026 PRO Cartridge Pool Filter Tank

    Best for large cartridge capacity
    Check it
  2. 5Hayward StarClear Plus Cartridge Swimming Pool FilterCheck it
  3. 6Hayward ProGrid Diatomaceous Earth DE Pool FilterCheck it
  4. 7Pentair EC-160301 Clean & Clear Plus

    Pentair EC-160301 Clean & Clear Plus

    Best for no-backwash cartridge care
    Check it
  5. 8VEVOR 2026 Pro Cartridge Pool Filter Tank

    VEVOR 2026 Pro Cartridge Pool Filter Tank

    Best for extra-large pool volume
    Check it
  6. 9XtremepowerUS 425 Sq. Ft. Swimming Pool Cartridge

    XtremepowerUS 425 Sq. Ft. Swimming Pool Cartridge

    Best for high-flow cartridge plumbing
    Check it

The best DE filter for an inground pool and the strongest alternatives

The Hayward ProGrid is the best complete DE filter in this group, while POOLPURE is the better match for a replacement grid set. The remaining picks are useful when you want cartridge convenience, a sand valve or a larger stated filtration area.

1

POOLPURE® FS-2005 DE Grid Pool Filter Replace: Best for DE grid replacement

POOLPURE® FS-2005 DE Grid Pool Filter Replace, DE pool filters for inground pools
9.7/10Our score
  • 60 sq. ft. filtration area
  • 7 full grids and 1 partial grid
  • 30 in high
  • ABS grid construction

This is a replacement grid set rather than a complete filter tank. It suits owners matching a 60 sq. ft.

See it on Amazon

Pros

  • 60 sq. ft. replacement set
  • Includes 7 full grids and 1 partial grid
  • Designed for DE powder

Cons

  • Not a complete filter tank
  • Old grids must be measured first

POOLPURE® FS-2005 is a replacement grid set for a 60 sq. ft. DE filter, not a complete tank and pump system.

It includes 7 full grids and 1 partial grid, with the full grids measuring 30 in long by 11 in wide and the partial grid measuring 30 in long by 9¾ in wide.

The set is designed for DE powder and uses ABS grids. Its stated compatible references include FNS Plus 60, 59003000, Jandy DEL/DEV60, Hayward DE6020, DEX6000DA, DE6000, PFS3060, FC-9550, PG-1905 and FG-1005.

The key buying step is measurement. Match the old grid dimensions and the internal layout before ordering, because a 60 sq. ft. rating alone does not prove that a replacement will seat correctly.

Choose this for a worn grid set inside a matching 60 sq. ft. system. For more replacement options, compare our guide to the best DE pool filter grid replacement.

POOLPURE® FS-2005 DE Grid Pool Filter ReplaceCheck it on Amazon
2

Swimara Ultra Series for Pentair CCP420 Pool: Best for heavy-use cartridge systems

Swimara Ultra Series for Pentair CCP420 Pool, DE pool filters for inground pools
9.6/10Our score
  • 420 sq. ft. total area
  • 4 cartridges at 105 sq. ft. each
  • 5 oz/sq yd trilobal media
  • Fits Pentair CCP420

The Ultra Series is a cartridge replacement set for Pentair CCP420 systems. Its 420 sq. ft. total area and heavier media suit high-use pools and seasons with heavy pollen.

See it on Amazon

Pros

  • 420 sq. ft. total area
  • Heavy 5 oz/sq yd media
  • 4-cartridge replacement set

Cons

  • Not a DE filter
  • Compatibility requires size verification

Swimara Ultra Series is a cartridge replacement set for Pentair CCP420 and Waterway Crystal Water 425 systems. It gives 420 sq. ft. total, with four cartridges at 105 sq. ft. each.

Each cartridge measures 7 in outside diameter by 26 in long, with 3 in open ends. Check your existing cartridge and housing before you order, because size matters more than the model name alone.

The 5 oz per square yard trilobal media is aimed at heavy-use pools and seasons with heavy pollen or fine debris. Trilobal fibers help catch particles down to 10 microns.

Polyurethane end caps help the cartridges seat, a polypropylene core supports the pleat pack, and pleat bands keep spacing even.

Depressurize the system before cleaning and follow the manual. Rinse top to bottom and inspect pleats for damage while wet.

For the Pentair CCP420, clean when pressure rises about 10 PSI above the clean starting pressure. This set suits CCP420 style housings, not a DE tank.

Swimara Ultra Series for Pentair CCP420 PoolCheck it on Amazon
3

XtremepowerUS 22-Inch Sand Filter for Inground: Best for sand-filter simplicity

XtremepowerUS 22-Inch Sand Filter for Inground, DE pool filters for inground pools
9.5/10Our score
  • 22 in tank
  • 7-way top-mount valve
  • 250 lb sand capacity
  • For pools up to 31,200 gallons

This sand system gives inground pool owners a different maintenance path from DE. The 7-way valve supports filter, backwash, rinse, waste, winter, recirculate and closed settings.

See it on Amazon

Pros

  • 7-way multiport valve
  • 250 lb media capacity
  • Inground and above-ground use

Cons

  • Pump is required and not included
  • Not a DE filtration system

The XtremepowerUS 22-Inch Sand Filter suits owners who want sand media and a multiport valve instead of DE powder. The tank holds 250 lb of filter sand.

It is stated for pools up to 31,200 gallons. Gallons alone do not set the right size, because pump flow, plumbing diameter and run length also shape circulation.

The 7-way top-mount valve covers filter, backwash, winter, recirculate, closed, rinse and waste. Learn each position before you need to backwash.

The package includes the sand filter, multiport filter, stand and manual. The pump is required and not included.

Place the tank where the lid and valve stay reachable, with room to turn the handle and check pressure. Keep sand level even and follow the manual for top ups.

Backwash through the valve as the main routine, then rinse to settle the bed. This suits a familiar valve routine, not DE powder filtration.

XtremepowerUS 22-Inch Sand Filter for IngroundCheck it on Amazon
4

VEVOR 2026 PRO Cartridge Pool Filter Tank: Best for large cartridge capacity

VEVOR 2026 PRO Cartridge Pool Filter Tank, DE pool filters for inground pools
9.4/10Our score
  • 325 sq. ft. filter area
  • For pumps from 2 to 2.5 HP
  • Up to 11,769 GPH
  • PP and fiberglass composite housing

The 325 sq. ft. VEVOR system suits large inground pools that use cartridge filtration.

See it on Amazon

Pros

  • 325 sq. ft. filter area
  • One-piece housing
  • Pressure gauge included

Cons

  • Not a DE filter
  • Requires pump compatibility checking

The VEVOR 2026 PRO cartridge system provides 325 sq. ft. of filter area for inground and above ground pools. It is designed for pumps from 2 to 2.5 HP.

Its stated flow is up to 11,769 GPH for pools up to 94,150 gallons. Those numbers help with rough sizing, but they do not replace a check against your pump curve and pipe layout.

The one-piece housing uses PP and fiberglass composite material. A single piece design reduces joints where leaks can start over time.

A pressure gauge helps you track the clean baseline and spot a rise. Write that starting number down after the first cleaning so later readings mean more.

The top-mounted automatic pressure relief valve helps release air and ease excess pressure. It is a safety feature, not a sign that you can open the housing while it is pressurized.

The filter core is listed at 50 microns with high-density pleated fibers. In practice, that puts it in cartridge territory rather than fine DE powder filtration.

Set up is described in three steps, which are secure the filter, connect the pump pipe to the inlet and connect the return to the outlet. Confirm port size and direction before you glue or tighten anything.

Choose it when a large cartridge area and a one-piece housing fit your equipment pad. Choose a DE model instead if you want grids, powder and backwashing.

VEVOR 2026 PRO Cartridge Pool Filter TankCheck it on Amazon
5

Hayward StarClear Plus Cartridge Swimming Pool Filter: Best for single-cartridge service

Hayward StarClear Plus Cartridge Swimming Pool Filter, DE pool filters for inground pools
9.4/10Our score
  • Extra-large single cartridge
  • Glass-reinforced copolymer body
  • Pressure gauge
  • 1½ in and 2 in connections

The StarClear Plus uses one large cartridge and a single-knob head connection. It fits owners who want cartridge service without a multi-cartridge internal layout.

See it on Amazon

Pros

  • Single large cartridge
  • Multiple connection options
  • Manual air relief valve

Cons

  • Not a DE filter
  • Single-cartridge design still needs regular cleaning

Hayward StarClear Plus uses an extra-large single cartridge for inground pools. The glass-reinforced copolymer body is molded as a single piece.

That construction is meant for corrosion-free outdoor use. A single piece base and body also avoids some joints that can wear with age.

The filter head uses a single-knob connection instead of clamps or bolts. That can make service faster, but you still need to release pressure before you open it.

The system includes a pressure gauge and a manual air relief valve. The gauge shows when cleaning is due, and the air relief helps you bleed air after service.

Plumbing options include 1½ in FIP, 2 in FIP and 2 in SKT connections. Connection type is a practical limit, so match it to your existing pipe before you buy.

A single cartridge can make removal and rinsing more direct than a four-cartridge layout. You handle one element, rinse it fully and inspect it for tears or wear.

The trade-off is that one element carries the whole filtration area. When it loads up, flow and clarity can change until you clean it.

Choose it when your plumbing matches and you prefer single-element service. It is a cartridge alternative, not a DE filter, and it does not use DE powder.

Hayward StarClear Plus Cartridge Swimming Pool FilterCheck it on Amazon
6

Hayward ProGrid Diatomaceous Earth DE Pool Filter: Best for a complete DE filter

Hayward ProGrid Diatomaceous Earth DE Pool Filter, DE pool filters for inground pools
8.9/10Our score
  • 60 sq. ft. filtration area
  • Glass-reinforced copolymer construction
  • Up-flow filtration
  • Top-down backwashing

The ProGrid is the clearest match for shoppers who want a complete 60 sq. ft. DE filter for an inground pool.

See it on Amazon

Pros

  • Complete DE filter system
  • 60 sq. ft. area
  • Durable glass-reinforced copolymer

Cons

  • Heavier complete unit
  • DE powder and backwashing are part of upkeep

Hayward ProGrid is the best complete DE filter here because it combines a 60 sq. ft. filtration area with a purpose-built DE layout for inground pools. Its high-impact grid elements use up-flow filtration and top-down backwashing.

That layout is what separates it from a replacement grid set. You get a complete tank system rather than parts for an existing housing.

The glass-reinforced copolymer construction is designed for corrosion-free durability. It is built to sit outdoors through heat, cold and wet seasons.

An easy-access clamp assembly gives you a way to reach the internal parts during cleaning and service. You still need clearance around the tank to open it safely and to handle the grids.

This filter works with DE powder and a pool pump, so it needs the right circulation setup. Powder amount and pressure limits come from the equipment instructions for the filter.

In daily use, pressure is your guide. Record the clean starting pressure, then backwash when pressure rises above the allowed level.

Before installation, check filter area, pump flow, plumbing and available height against your current equipment. A tall complete filter needs pad space and service room, not just a spot for the tank.

Choose it when you want a complete 60 sq. ft. DE filter rather than replacement grids alone.

For system matching, read the guide to DE pool filter and pump sizing.

Hayward ProGrid Diatomaceous Earth DE Pool FilterCheck it on Amazon
7

Pentair EC-160301 Clean & Clear Plus: Best for no-backwash cartridge care

Pentair EC-160301 Clean & Clear Plus, DE pool filters for inground pools
8.8/10Our score
  • 420 sq. ft. filter area
  • 4 polyester cartridges
  • 2 in unions
  • 1½ in drain

The Clean & Clear Plus gives large pools a 420 sq. ft. cartridge system without backwashing. Its four polyester cartridges spread the filtration area across a removable cartridge assembly.

See it on Amazon

Pros

  • 420 sq. ft. area
  • Four cartridges
  • No backwashing required

Cons

  • Not a DE filter
  • Four cartridges need coordinated cleaning

Pentair Clean & Clear Plus is a 420 sq. ft. cartridge filter with four nonwoven polyester cartridges. It uses 2 in unions, a 1½ in drain for winterization and an internal air bleed.

The corrosion-resistant tank uses injection-molded, fiberglass-reinforced polypropylene. That material choice suits outdoor placement and repeated pressure cycles.

Unlike a DE filter, this cartridge system does not need backwashing. That can simplify water handling, because you rinse cartridges instead of sending a backwash discharge to waste.

Four cartridges spread the filtration area across separate elements. The benefit is capacity, and the cost is more parts to remove, rinse and inspect at each cleaning.

Cleaning needs coordination because all four elements belong to the same assembly. Rinse each one, check for damage and seat them evenly before you close the tank.

The 2 in unions affect plumbing planning. Match the union size and pipe layout before you order, because a conversion can turn into extra fittings and adapters.

The 1½ in drain helps with winterization. Follow the manual for draining and storage steps so water does not sit in the tank or cartridges.

Choose it when you want large cartridge capacity and no backwashing. For replacement planning, see our guide to best DE pool filter parts if your current system is DE rather than cartridge-based.

Pentair EC-160301 Clean & Clear PlusCheck it on Amazon
8

VEVOR 2026 Pro Cartridge Pool Filter Tank: Best for extra-large pool volume

VEVOR 2026 Pro Cartridge Pool Filter Tank, DE pool filters for inground pools
8.7/10Our score
  • 425 sq. ft. filter area
  • For pumps from 1 to 3 HP
  • Up to 13,393 GPH
  • PP and fiberglass composite housing

This 425 sq. ft. VEVOR cartridge system targets very large pool volumes and a broad pump range.

See it on Amazon

Pros

  • 425 sq. ft. filter area
  • 1 to 3 HP pump range
  • Large stated pool capacity

Cons

  • Not a DE filter
  • Large housing needs installation space

The VEVOR 2026 Pro cartridge system has the largest stated filter area in this group at 425 sq. ft. It is designed for pumps from 1 to 3 HP.

Its flow is up to 13,393 GPH, and the stated pool capacity is up to 107,147 gallons. That wide pump range suits different set ups, but your actual pump still needs to match the ports and flow limits.

The one-piece housing uses PP and fiberglass composite material. It includes a pressure gauge and an automatic pressure relief valve for monitoring and air release.

The filter core uses 50-micron material with high-density pleated fibers. That is a cartridge approach, so cleaning means removing and rinsing the element rather than backwashing DE grids.

This model suits a large installation where the broader pump range is useful. It also suits owners who want pressure readings without adding a separate gauge.

The housing is substantial in size and weight, so measure the equipment pad first. You need room for the tank, the connections and the space to open and service it.

Confirm the inlet and outlet connections before choosing it. A large filter area does not help if the plumbing or pump cannot work with the housing.

Choose it for a very large cartridge system with pressure monitoring built in. Choose the Hayward ProGrid instead when you want DE filtration rather than a cartridge tank.

VEVOR 2026 Pro Cartridge Pool Filter TankCheck it on Amazon
9

XtremepowerUS 425 Sq. Ft. Swimming Pool Cartridge: Best for high-flow cartridge plumbing

XtremepowerUS 425 Sq. Ft. Swimming Pool Cartridge, DE pool filters for inground pools
8.0/10Our score
  • 425 sq. ft. total area
  • 4 filter elements
  • 2 in ports
  • 150 GPM flow rating

The XtremepowerUS 425 sq. ft. cartridge system suits inground pools with 2 in plumbing and a high-flow setup. Its four cartridges provide the stated filtration area.

See it on Amazon

Pros

  • 425 sq. ft. area
  • 2 in plumbing connections
  • 4-cartridge layout

Cons

  • Not a DE filter
  • Pump and plumbing must match the system

XtremepowerUS 425 Sq. Ft. uses 4 filter elements to provide 425 sq. ft. of filtration area.

The system is built for inground and above-ground pools, spas, hot tubs and water features.

Its 2 in inlet and outlet ports make plumbing matching central to the choice. The stated flow rating is 150 GPM, so pump output and pipe size need to work with that limit.

The reinforced polymer tank is designed for outdoor conditions. A locking ring gives access to the cartridges for cleaning and replacement.

Four elements spread the filtration area across the tank. That layout can suit high-flow set ups, but it also means more cartridges to rinse and inspect at each service.

Cartridge filtration in this system captures particles in the 10 to 15 micron range in the product data. That is finer than many owners expect from cartridge care, yet it is not DE powder filtration.

The stated turnover figures help with rough pool sizing. They still do not replace a check of pump flow, plumbing and equipment space.

This is a cartridge alternative, not a DE filter. Its four-element layout may fit a high-flow installation, but the pump and existing plumbing need to support the system before you swap.

Choose it when 2 in plumbing and a 425 sq. ft. cartridge layout match your equipment. It is less suitable when you need to keep a DE powder system.

XtremepowerUS 425 Sq. Ft. Swimming Pool CartridgeCheck it on Amazon

How do you choose a DE filter for an inground pool?

Choose a DE filter by filter area, pump flow, plumbing and the exact replacement parts your tank uses. Pool gallons matter, but they are only one part of a circulation system.

Start with the filter area for your pool and debris load. A 60 sq. ft. filter appears in both the Hayward ProGrid and the POOLPURE replacement set.

The Hayward is the complete filter, while POOLPURE replaces the internal grid set in a compatible housing. That difference decides whether you are shopping for a tank or for parts.

Check pump flow before choosing a tank. An oversized pump can push more water than the filter or plumbing should handle.

An undersized pump may not circulate enough, leaving weak skimming and uneven chemical mixing.

Plumbing size affects pressure and flow through the whole loop. Small pipe, long runs and many fittings change what the pump delivers at the filter.

Measure the equipment pad before you commit to a complete filter. Complete filters can be tall and heavy, and the clamp or lid needs service space.

Think about service access, not just footprint. You need room to open the housing, remove grids or cartridges and stand safely.

For replacement grids, measure old parts directly. Height, width and layout matter because a matching area rating alone does not prove fit.

Confirm DE powder and backwashing fit your routine. DE needs powder loading after cleaning, cartridge needs rinsing, and sand needs backwash and media checks.

Check manual limits for pressure and flow. Those limits protect the tank, grids and pump and tell you when service is due.

Use pool volume as a rough guide, not the final answer. Match your shortlist to your pad, pump and plumbing.

DE filter, cartridge filter or sand filter?

DE is the best fit when fine filtration and DE powder are central to your choice. Cartridge systems suit owners who prefer removable elements and no backwashing.

Sand systems suit owners who want a multiport valve and sand-media routine. Each type changes what you do at cleaning time and what parts you replace.

A DE filter needs correct powder loading after cleaning or backwashing. Too little or too much powder can change pressure and clarity.

A cartridge filter needs cartridge removal and rinsing. You inspect the pleats, rinse both sides as directed and check the seals before seating the element.

A sand filter needs the right sand level and backwash settings. The valve positions control filter, backwash, rinse, waste, recirculate, closed and winter steps.

Your cleaner does not replace the circulation filter. A cleaner moves debris on the floor, while the filter cleans water across the whole pool.

Read how a robotic pool cleaner filters water and why an automatic cleaner does not replace the pool filter before treating a cleaner as a filtration upgrade.

What should you check before installing a DE filter?

Check filter area, pump connection, plumbing size, pressure gauge, available height and service clearance before installation. Those checks prevent most avoidable problems.

Turn off the pump and release pressure before opening a filter housing. Never open a pressurized tank.

Confirm pump connection type and direction before you install. Wrong ports or reversed flow can stop the filter from working.

Check plumbing size against filter ports and existing pipe. Adapters add joints that need to seal cleanly.

Note the clean starting pressure on the gauge after service. That baseline makes later readings useful.

Measure height and service clearance. You need room for the lid or clamp, plus space to remove grids or cartridges without rushing.

Match replacement grids by dimensions and internal layout. Measure old parts rather than relying on the filter name, because a 60 sq. ft. label does not guarantee the same shape or seat.

Inspect manifolds and internal parts while open. Cracks, warping or worn seals can affect flow even when the outside looks fine.

Check every valve position after installation and watch for leaks. Confirm the return line flows back to the pool.

Prime and bleed air as the instructions direct. If the pump uses a Century motor and needs seal service, use the guide to replace a shaft seal with a Century motor pool pump seal kit.

How do you maintain a DE pool filter?

Record the clean starting pressure after a full cleaning. That number becomes your baseline for every later check.

Clean or backwash the filter when pressure rises above the level allowed by the equipment instructions. Do not wait for cloudy water to tell you service is due.

Add the correct DE powder amount after backwashing. The amount depends on your filter model, so use the manual rather than a guess.

Inspect the grids when flow does not return after backwashing. Look for tears, warping, coating build-up or damaged fabric.

Keep the pump off before opening the housing. Release pressure first, then follow the equipment manual step by step.

Use the correct replacement parts for the filter model. A close fit is not enough when grids, seals or manifolds must seat precisely.

Rinse and handle grids gently during a deep clean. Rough handling can damage the fabric and shorten the life of the set.

After reassembly, check for leaks before you leave the equipment pad. Watch the clamp, ports and return line while the system runs.

A pressure reading is more useful when you know the clean baseline. Record that number after a full cleaning so you can spot a rise instead of guessing from water clarity alone.

Note the date and pressure in a simple log. Patterns across the season help you plan cleaning before performance drops.

Verdict: which DE filter should you choose?

Choose the Hayward ProGrid if you need a complete 60 sq. ft. DE filter for an inground pool.

It is the clear complete-system pick in this group.

Choose POOLPURE FS-2005 if your existing 60 sq. ft. system needs replacement grids and the old parts match its dimensions. Measure first, because grid fit matters more than the label alone.

Choose the XtremepowerUS sand filter if you prefer a 7-way backwash valve and sand media. That path suits owners who want a valve-based routine instead of DE powder.

Choose a cartridge system if avoiding DE powder and backwashing matters more. Cartridge care means removal, rinsing and inspection of pleated elements.

Match the filter to the pump, plumbing and service space before ordering. The right choice depends on the whole circulation system, not only the filtration area.

For most DE shoppers, the split is simple. Use Hayward ProGrid for a complete DE tank, POOLPURE for replacement grids and cartridge or sand only when that upkeep style fits your pool better.

Our top 3 picks at a glance

  1. 1 POOLPURE® FS-2005 DE Grid Pool Filter Replace
    Best for DE grid replacement

    POOLPURE® FS-2005 DE Grid Pool Filter Replace

    9.7/10 our score

    See it on Amazon
  2. 2 Swimara Ultra Series for Pentair CCP420 Pool
    Best for heavy-use cartridge systems

    Swimara Ultra Series for Pentair CCP420 Pool

    9.6/10 our score

    See it on Amazon
  3. 3 XtremepowerUS 22-Inch Sand Filter for Inground
    Best for sand-filter simplicity

    XtremepowerUS 22-Inch Sand Filter for Inground

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What is the best DE filter for an inground pool?

The Hayward ProGrid Diatomaceous Earth DE Pool Filter is the strongest complete-system choice here because it has a 60 sq. ft. filtration area, up-flow filtration and top-down backwashing. Choose the POOLPURE FS-2005 instead when you need replacement grids for a matching 60 sq. ft. system.

How do DE filters compare with cartridge filters?

DE filters use diatomaceous earth powder on internal grids, while cartridge filters use removable pleated cartridges. DE can suit owners who want DE filtration and accept backwashing and powder handling.

Cartridge systems avoid backwashing but need cartridge removal and rinsing.

How do I size a DE filter for an inground pool?

Match the filter area to the pool's circulation needs, pump flow and plumbing. A 60 sq. ft. filter appears in the DE choices here, but the correct size depends on the whole system.

Review the pump and filter sizing guide, then confirm the equipment manual before installation.

Do DE pool filters need a pump?

Yes. A DE filter works as part of a circulation system that moves water through the filter and back to the pool.

The pump, plumbing, filter area and operating flow need to work together.

Never choose a filter by pool gallons alone.

How often should I clean a DE pool filter?

Clean or backwash a DE filter when pressure rises above the clean starting pressure specified by the equipment instructions. After backwashing, add the correct amount of DE powder for that filter.

Open the housing only after the pump is off and pressure is released.