Guide

How to Remove Black Algae from a Pool

Updated on · By the Pool Care Pilot team

To remove black algae in pool water, brush the spots hard, shock the pool, run the pump and filter, then add an algaecide made for black algae. Repeat brushing and testing until the spots stop returning, and keep chlorine and pH in range.

On this page (9 sections)
  1. Why does black algae in pool water resist normal treatment?
  2. How do you kill black algae with shock and brushing?
  3. Which algaecide helps after shock for black algae?
  4. When is In The Swim Algaecide 60 Plus a better fit?
  5. When does the basic Clorox algaecide make sense?
  6. How do you keep black algae from returning after treatment?
  7. What should you do if black algae keeps coming back?
  8. When should you close the pool instead of treating black algae?
  9. What is the fastest plan to clear black algae in pool water?

To remove black algae in pool water, brush the spots hard, shock the pool, run the pump and filter, then add an algaecide made for black algae. Repeat brushing and testing until the spots stop returning, and keep chlorine and pH in range.

Black algae in pool water looks like dark green or black spots that feel rough or slimy. It often starts on steps, benches, lights, and walls with poor circulation.

A good treatment plan pairs pool chemicals for algae with strong brushing, because chemicals alone rarely break up established spots.

Why does black algae in pool water resist normal treatment?

Black algae in pool water resists treatment because it forms tough, rooted spots that protect the algae underneath. A normal chlorine level may keep green algae away, yet it may not kill these spots once they take hold.

Brushing matters as much as the chemicals. You need to break the surface so the sanitizer can reach the algae.

That is why steps, benches, and wall corners often need extra work.

Low chlorine, high pH, warm water, and poor circulation all help algae grow. Dead leaves, phosphate buildup, and a dirty filter can also feed the problem.

If you only add chemicals and skip brushing, the spots often return in the same place.

Start by testing chlorine, pH, and alkalinity. Many algae problems get worse when free chlorine drops near zero.

Our guide to swimming pool chemicals explains the main products and how they work together.

How do you kill black algae with shock and brushing?

Shock and brushing work together to kill black algae and expose it to chlorine. Shock raises the sanitizer level fast, while brushing breaks the tough surface that protects the spots.

Brush every spotted area with a stiff wall brush. Pay extra attention to steps, ledges, waterline tile, and any spot that gets little flow.

Brush again the next day, because loosened spots often need a second pass.

Run the pump and filter while you treat. Good circulation spreads the chemicals through the whole pool.

Keep the filter running until the water clears and the chlorine level returns to the range on your test kit.

For the shock step, compare options in our best pool shock for black algae guide. If you are not sure which shock type fits your pool, our best pool shock for algae guide covers the broader choices.

Which algaecide helps after shock for black algae?

An algaecide helps after shock by targeting algae that brushing and chlorine may have missed. It also helps prevent a quick return while your chlorine levels recover.

The Clorox® Pool&Spa™ XTRABLUE® Plus Swimming Pool Algaecide is a 40 ounce liquid made to kill and prevent green, mustard, and black algae. Clorox says it is non staining, non foaming, and treats up to 25,000 gallons.

It also suits salt pools and all pool types. Clorox says it can clear algae in 24 hours when used as directed.

Use a product like this after brushing and shocking, not instead of them. Add it with the pump running so it spreads through the water.

Follow the label for the dose, because the right amount depends on your pool size and the severity of the growth.

When is In The Swim Algaecide 60 Plus a better fit?

In The Swim Algaecide 60 Plus is a better fit if you want dose choices for prevention, maintenance, or visible algae. It is a 1 quart liquid made for above ground and in ground pools.

In The Swim says it controls green, yellow, black, and pink algae. It is non metallic, non foaming, and low odor, with a formula made for pools with attached spas, waterfalls, or fountains.

The brand says it is pH tolerant, so you do not need to change pH before you apply it. It also works with chlorine, bromine, biguanide, and salt systems.

In The Swim recommends 6 to 11 ounces per 10,000 gallons for an initial dose, 2 to 4 ounces per 10,000 gallons for maintenance, and 11 to 17 ounces per 10,000 gallons for visible algae. That clear dosing helps if your pool needs a stronger treatment now and a lower dose later.

When does the basic Clorox algaecide make sense?

The Clorox® Pool&Spa™ Swimming Pool Algaecide makes sense for simple prevention and follow up treatment. It is a 1 quart non foaming liquid for all pools, including saltwater pools.

Clorox says it helps prevent and treat green pool algae and controls algae growth. It also says it kills existing algae and prevents future growth.

That wording makes it a straightforward choice for owners who want a basic algaecide without extra features.

Pick this one if you want a simple liquid for weekly prevention or light treatment. Pick the XTRABLUE® Plus version if black algae is your main concern.

Pick In The Swim Algaecide 60 Plus if you want separate doses for maintenance and heavy growth.

All three options are liquids, so storage is simple. Keep them closed, upright, and out of reach of kids and pets.

Always read the label before you add any chemical to your pool.

How do you keep black algae from returning after treatment?

Black algae stays away when you keep chlorine steady, brush often, and run the filter enough. Good habits after treatment matter as much as the treatment itself.

Test free chlorine and pH at least twice a week in warm weather. Brush steps, benches, and walls weekly, even when you do not see spots.

That habit removes early growth before it forms a tough layer.

Use an algaecide as a preventative if your pool gets algae each summer. The XTRABLUE® Plus description says to use it weekly if your pool is prone to algae or when temps rise.

Circulating water when you apply it helps spread it through the pool.

Watch alkalinity too, because it helps hold pH steady. If pH keeps drifting, our guide to baking soda for alkalinity in pool water can help you correct it.

Balanced water makes chlorine work better and makes algae control easier.

What should you do if black algae keeps coming back?

Black algae that keeps coming back usually needs a stronger reset. Check chlorine, pH, alkalinity, stabilizer, and filter pressure before you add more chemicals.

A clogged filter can let particles pass and can reduce flow. Backwash or rinse the filter as directed, and check that return jets push water across dead spots.

Add a return jet or adjust the angle if one corner never clears.

Salt pools need extra checks too. Low salt or a weak cell can lower chlorine output, so algae can grow even when the pool looks fine.

Our post on do salt water pools get algae explains why salt systems still need testing and care.

If spots return in the same rough areas, brush harder and treat again. Some owners use a copper based treatment for stubborn spots, but metal products can stain some surfaces.

Follow label directions and test first in a small area if you are unsure.

When should you close the pool instead of treating black algae?

Closing the pool makes sense when the season is over and you do not want to keep treating warm water. It does not replace treatment if algae has already taken over, but it can protect the pool through winter.

Start with brushed, shocked, and balanced water before you cover it. A dirty pool under a cover can stain the surface and make spring opening harder.

Brush, shock, and add the right winter chemicals before you close.

If you need winter products, compare a best pool closing kit for standard pools. For smaller pools, our best pool closing kits for above ground pools covers kits made for that setup.

What is the fastest plan to clear black algae in pool water?

The fastest plan is brush, shock, filter, add algaecide, and repeat until spots stop returning. Speed comes from doing each step well, not from adding extra chemicals at once.

Brush all spots hard on day one. Shock the pool, run the pump and filter, and add an algaecide made for black algae after the shock step.

Brush again the next day and test chlorine and pH.

Pick Clorox® Pool&Spa™ XTRABLUE® Plus if black algae is the main problem and you want a 40 ounce all in one option. Pick In The Swim Algaecide 60 Plus if you want dose choices for heavy growth and maintenance.

Pick the basic Clorox algaecide if you want a simple 1 quart option for prevention and light treatment.

Once the spots are gone, keep chlorine in range, brush weekly, and use a preventative dose during hot weeks. That routine keeps black algae in pool water from making a return visit.

Frequently asked questions

Why does black algae keep coming back in my pool?

Black algae often returns because chlorine is too low, brushing was too light, or spores stayed in rough spots like steps, benches, and cracks. Shock, brush, and apply a black algae algaecide, then keep sanitizer in range.

Recheck weekly until no spots return for a few weeks.

Can I swim with black algae in the pool?

It is best to wait until the water is clear and sanitizer levels are in range. Algae can make surfaces slippery and can use up chlorine, so the water may not be properly sanitized.

Brush, shock, filter, and test before you swim.

Do I need to drain a pool with black algae?

Most pools do not need draining for black algae if you can brush, shock, and filter the water. Draining is usually saved for severe staining, very high stabilizer, or chemistry you cannot correct.

Try a full treatment first and follow label directions.